VITlightbattery - AOS Technologies AG
VITlightbattery - AOS Technologies AG
VITlightbattery - AOS Technologies AG
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
VITlight battery<br />
• Hi-G battery for VITlights<br />
• Remote power-on by closing switch<br />
• Battery test switch with LED<br />
indicators<br />
• Rugged design for on-board<br />
applications such as vehicle<br />
crash testing<br />
The purpose-built VITlight battery provides a simple and cost-effective means of powering 2 VITlight lamps<br />
(optional: up to 4) and makes on-board illumination for vehicle impact testing or sled applications easier<br />
than ever before.<br />
Key features<br />
• Remote power-on by closing switch: Switches lamps<br />
on at a pre-set interval prior to recording and off after the test<br />
to save battery power.<br />
• Battery test switch with LED indicators.<br />
• Rugged design.<br />
• Easy to install using the mounting bars provided.<br />
• Complete with 2 VITlight cables (4,5m).<br />
Advantages<br />
• Ready-to-use on-board illumination system.<br />
• Extended operating time due to remote power-on.<br />
• Long lifetime thanks to rugged design.<br />
• Battery status indicated by LEDs.<br />
• Illumination intensity easily adjustable by varying the number<br />
of lamps and the tungsten bulb rating.<br />
<strong>AOS</strong> products and solutions are available from distributors and OEM partners.<br />
Please contact us for details of your local distributor.<br />
Services<br />
• Customizing (camera equipment and software)<br />
• Warranty extensions<br />
• Maintenance contracts<br />
• Financing, leasing<br />
Accessories<br />
• VITlight lamps (see VITlight spec. sheet)<br />
• VITlight mounting plates<br />
• Spare bulbs (15…250 W)<br />
Project engineering<br />
• Design of turnkey systems<br />
• Design of fully customized cameras<br />
• Customized data interfaces (i.e. wireless or fiber-optic)<br />
• Special protective housings (i.e. underwater, explosion-proof
Duty cycle<br />
A fully-charged VITlight battery will provide power for the times<br />
listed below, depending on the number of VITlights connected<br />
(measured from switch-on until brightness drops to 75% of original<br />
value, i.e. a half-stop under exposure):<br />
1 VITlight<br />
@ 150 W<br />
Signal logic<br />
2 VITlights<br />
@ 150 W each<br />
VITlight battery specifications<br />
3 VITlights<br />
@ 150 W each (optional)<br />
20 minutes 10 minutes 7 minutes 5 minutes<br />
Light-on signal<br />
(closing switch)<br />
Light<br />
Camera trigger signal<br />
(logic 0 or closing switch)<br />
Image sequence<br />
(depends on trigger<br />
setting, example shows<br />
trigger at 20%)<br />
Options<br />
In its standard configuration, 2 VITlights can be connected to the<br />
VITlight battery. Provision for connecting 4 lamps is available as an<br />
option. Please note that the duty cycle will be reduced by 50% in<br />
this case.<br />
Output voltage 12 V DC<br />
Battery capacity 12 Ah<br />
Battery type Maintenance-free, sealed lead battery.<br />
Inputs / outputs Light on: closing switch.<br />
4 VITlights<br />
@ 150 W each (optional)<br />
Battery charge.<br />
Output lamp 1, 2 (150 W max. each).<br />
Output lamp 3, 4 (150 W max. each) – optional, available on request.<br />
Charging time Approx. 3 hours to charge from 50% to 100% capacity.<br />
Size 230 x 200 x 110 mm<br />
Weight 7.5 kg excl. lamps<br />
Specifications are subject to changes without prior notice – v0706<br />
For manual operation, the light-on signal can be replaced by a closing switch.<br />
<strong>AOS</strong> <strong>Technologies</strong> <strong>AG</strong><br />
Taefernstrasse 20<br />
CH-5405 Baden-Daettwil<br />
Switzerland<br />
Phone +41 56 483 34 88<br />
Fax +41 56 483 34 89<br />
www.aostechnologies.com<br />
Info@aostechnologies.com
Change language