2011 FEBRUARY SUPPLEMENTAL - Plano Office Supply

Voi and Systems Integration
Worksurface Applications
Either Voi or Systems worksurfaces can be used with Voi in an open plan application. There are several support options:
A. Completely panel supported.
B. Combination of panel supported and another worksurface support such as:
• Pedestal (Brigade , Flagship or Voi)
• Systems open leg
• Voi O-leg
• End panel (Systems or Voi)
• Tower to worksurface bracket
• Support column
• Systems round post leg
• Voi post leg
C. Freestanding:
• Two pedestals (Brigade , Flagship or Voi)
• Two Voi O-legs
• One Voi O-leg and one Voi O-leg support for lower credenzas
• Two end panels (metal or Voi)—requires metal or Voi modesty panel
Additional application guidelines for worksurfaces:
• Systems worksurfaces ship standard with cantilevers unless the ‘omit cantilever’ option is selected.
• Systems worksurfaces are available with t-mold or edgeband edges.
• Systems worksurfaces are available with grommets, wire management scallops, or no grommets.
• When Voi lower credenzas are used along the spine wall and are placed adjacent to the wing wall, one electrical/data cutout on the wing wall will be blocked.
• When Voi credenzas are used along the wing wall and are placed adjacent to the spine wall, one electrical/data cutout on the spine wall will be blocked.
• When the Voi O-leg support for credenzas is used, it is recommended to also panel attach the worksurface with the worksurface anti-dislodgement bracket kit HMWA2.
• When the Voi O-leg support is used with panels, it is recommended to also panel attach the O-leg to the panel with the O-leg to panel bracket kit HLSPBL (left) and/or
HLSPBR (right). This bracket will provide additional workstation rigidity. The bracket is designed to work with edgeband worksurfaces only.
• When the Voi end panel support is used with panels, it is recommended to use the end panel support with panel bracket model. This model will provide additional
workstation rigidity.
• The worksurface to tower bracket kit, HSTB2W1, will work with Voi towers, Voi worksurfaces, and systems worksurfaces.
Application Guidelines—Combination of Panel Supported and Another Worksurface Support
• For applications where 1) the worksurface is perpendicular to the spine wall; 2) the worksurface is panel supported off the spine wall; and 3) there are Voi credenzas placed
under the worksurface along the spine: there is not enough clearance to use standard worksurface cantilevers to attach the worksurface to the spine. Use the worksurface
anti-dislodgement bracket kit HMWA2 to panel attach the worksurface in lieu of cantilevers. Select the ‘omit cantilever’ option if systems worksurfaces are being used and
the cantilevers are not needed elsewhere on the worksurface.
• The Voi O-leg-to-panel bracket is designed to work with edgeband worksurfaces. Use of the Voi O-leg with t-mold worksurfaces will prevent the attachment of the leg to the
panel.
Panel Mounted Stack-on Storage Applications
• The Voi stack-on storage cabinets can be used on both Initiate and Abound as panel mounted overheads.
• The sliding door stack-on storage units are available in 36, 42, 48 widths in addition to 60, 66, 72, and 78 widths.
• The 4 door stack-on storage units are only available in 60, 66, 72, and 78 widths.
• The storage units require a storage to panel bracket kit, model HLSLPMB. This model includes one left hand and one right hand bracket. The brackets are available in all
Core and Choice/Metallic paint colors.
• For 66, 72, or78 wide cabinets, two sets of brackets (four brackets total) are required.
• The storage cabinets do not have off modular capabilities.
• The storage cabinets cannot be upmounted.
• For proper installation and support, the storage units must follow the following specification rules:
• There should be a storage unit of the same construction on each side of a given panel.
• The storage units on opposite sides of a given panel should be in the same location vertically and horizontally.
• Only one storage unit per panel, per side.
• The wing panel adjacent to the spine wall needs to be the same height as the spine wall.
Contact HON’s Integrated Design Services team with specification questions.
Voi Specifying/Design Guide
2/2011 HON Supplemental List Pricer 19
desking workstations storage & files seating tables index