2011 FEBRUARY SUPPLEMENTAL - Plano Office Supply

index tables seating storage & files workstations desking
Voi Specifying/Design Guide
Steps for specification:
1. Select the right worksurface.
Choose the worksurface shape and size that best fits your office layout.
Rectangle Worksurface
Depths: 20, 24, 30, 36
Widths: 36, 42, 48, 54,
60, 66, 72, 84
Tips
• Rudder, Saddle, and Wedge worksurfaces are used like
peninsulas.
• Rudder worksurface needs to use an O-leg and two
post legs.
• T-mold is not an option on Voi worksurfaces; edgeband
only.
Rudder Worksurface
Depths: 24, 30
Widths: 72
Saddle Worksurface
Depths: 24, 30
Widths: 72
• Select grommet or no grommets. If grommets are
specified they ship in a predetermined location.
No grommets in 24W and 30W worksurfaces.
One grommet in 36W and 48W worksurfaces.
Two grommets in 48-84W worksurfaces.
• Abound worksurfaces can be used (see Abound pricer
for more specification details).
• O-leg panel applications cannot be used with T-mold
worksurfaces.
2. Select the supports.
Countless combinations of support options meet a variety of support and storage needs.
O-Leg Support for Low Credenza
HLSL307O, HLSL247O, HLSL207O
20D x7H, 24D x7H,
30D x7H
7 O-leg works with the lower credenza to
support a worksurface.
End Panel Support
HLSL2028E, HLSL2428E,
HLSL3028E
28 1 ⁄ 2H x20D x16W,
28 1 ⁄ 2H x24D x16W,
28 1 ⁄ 2H x30D x16W
2 Drawer Lateral with Pulls
HLSL2430L
30W x24D x28 1 ⁄ 2H
O-Leg Support for Worksurfaces
HLSL208O, HLSL2428O, HLSL3028O
20D x28 1 ⁄ 2H, 24D x28 1 ⁄ 2H,
30D x28 1 ⁄ 2H
Use the 28 1 ⁄ 2H O-leg model for a contemporary
design to provide support for the worksurface.
Laminate End Panel Support
With Attachment Bracket
HLSL2428EBL, HLSL2428EBR,
HLSL3028EBL, HLSL3028EBR
28 1 ⁄ 2H x24D, 28H x30D
Multi-Drawer File Center
HLSL2430MF
30W x24D x28 1 ⁄ 2H
Tips
• End panels need to be specified with worksurfaces
36W or greater.
• Harbor Teak can be specified on drawer fronts only, not
chassis.
B/B/F Pedestals
HLSL2028B, HLSL2428B,
HLSL3028B
16W x20D x28 1 ⁄ 2H,
16W x24D x28 1 ⁄ 2H,
16W x30D x28 1 ⁄ 2H
Bookcase Support
HLSL30OBC, HLSL24OBC
12W x30D x28 1 ⁄ 2H,
12W x24D x28 1 ⁄ 2H
• When using an O-leg in open plan, panel supported,
applications, you must specify an O-leg to panel
attachment bracket separately.
Wedge Worksurface
Depths: 24, 30
Widths: 60, 66, 72
• Edgeband color is limited and is based on the
worksurface color selection. See chart on page 10.
• HWSA2 bracket kit and HCTL182/HCT242 cantilever
models must be specified in addition to the
worksurfaces to work with panels.
• Harbor Teak laminate is only available as a top surface
and door/drawer fronts.
O-Leg-to-Panel Attachment Bracket
HLSLPBL, HLSLPBR
Left handed bracket (quantity 1)
Right handed bracket (quantity 1)
F/F Pedestal
HLSL2028F, HLSL2428F,
HLSL3028F
16W x20D x28 1 ⁄ 2H,
16W x24D x28 1 ⁄ 2H,
16W x30D x28 1 ⁄ 2H
Post Leg
HLSL28P
28 1 ⁄ 2H, 2square
B/B/F Narrow Pedestals
HLSL2428S, HLSL3028S
9 1 ⁄ 2W x24D x28 1 ⁄ 2H,
9 1 ⁄ 2W x30D x28 1 ⁄ 2H
• Pedestals are 30D; when specifying a 36D
worksurface, there will be a 6 overhang.
• O-leg and panel applications cannot be used with
T-mold.
• All modular pedestals have an easy attach method to
the worksurface for quick assembly.
16 HON Supplemental List Pricer 2/2011