Tools for bicycle service 15 - Unior
Tools for bicycle service 15 - Unior Tools for bicycle service 15 - Unior
New advanced technology The use of new technological methods and top quality materials result in tools with a long life span, safety designs ensure repair jobs without damages, customized solutions, excellent effectiveness, modern materials and ergonomic design provide good looks and safe use. Customized solutions for excellent results Our solutions offer adaptability to the bicycle parts of all producers. Our tradition, our own design, and constant technical development and modern technology keep us one step ahead. Excellent durability Unior hand tools finish many jobs faster and make working in tight areas easier. They are adapted to also work even on the latest bicycle models. Tools for frame and fork Tools for drive Tools for wheel sets Multifunctional tools Repairing and centering stands Sets Toll sets SOS for Europlus, Eurovision, Eurostyle carriages 338 - 343 343 - 354 354 - 359 360 - 361 361 - 366 366 - 368 368 - 369 15
• EN 15 1614/4BI Universal crown race puller • material: special tool steel, hardened and tempered • surface finish: blacken to standard DIN 50938 • The puller is a tool for quickly and precisely removing the headset crown race from 1", 1.1/8", 1.1/2" suspension or rigid front fork. To use, place the puller bush onto the front fork race and fix it by turning the nut. Turn the spindle attached to the steering column to pull the crown race from the fork. The product enables efficient race removal without the use of a hammer. It is intended for both professionals and home users. D D D L B 620195 1" 1.1/8" 1.1/2" 351 320 3510 192,10 1683/4A Crown race setting system • material: special tool steel • surface finish: blacken to standard DIN 50938 • Dimension: 1’’, 1.1/4’’; 1.1/8’’ as additional parts and 1.1/2" is dimension of the tube. • The crown race setting system is intended for crown race installation on the steerer tube to fit 1’’, 1.1/4’’, 1.1/8’’, 1.1/2" diameters. The inserts are interchangeable. This tool enables quick and efficient work. 338 Tools for frame and fork A A A A L D 620255 1" 1.1/8" 1.1/4" 1.1/2" 319 46 2500 35,39 1616/4 Ball race remover • material: special tool steel • surface finish: blacken to standard DIN 50938 • This tool is used for removal of headsets of older bike models. To remove the ball bearing cups, tap on the tool with hammer. A B H D1 D2 D3 D4 615527 25 55 100 37 41 44 47 422 36,59 1681/4 Head set cup remover • material: special tool steel • surface finish: blacken to standard DIN 50938 • The head set cup remover makes removal of cups 1", 1.1/8" and 1.1/4" from the frame easy L D 616291 1" 1.1/8" 1.1/4" 300 40 327 14,27
- Page 1: 15 Tools for bicycle service A spec
- Page 5 and 6: • EN 15 1618/2DP Cone wrench, sin
- Page 7 and 8: • EN 15 1694 Head tube reamer 1.1
- Page 9 and 10: • EN 15 1695 Frame taps • mater
- Page 11 and 12: • EN 15 1672/2 Adjustable cup wre
- Page 13 and 14: • EN 15 1662/4 Taper thread crank
- Page 15 and 16: • EN 15 1698 Bottom bracket tappi
- Page 17 and 18: • EN 15 1660/2 Freewheel remover
- Page 19 and 20: • EN 15 1670.8/2BI Freewheel remo
- Page 21 and 22: • EN 15 1644/2 Chain wear indicat
- Page 23 and 24: • EN 15 1635/2P Spoke wrench, Mav
- Page 25 and 26: • EN 15 1612PB Set of cone wrench
- Page 27 and 28: • EN 15 1693B Stand with fixed pl
- Page 29 and 30: • EN 15 1688 Wheel centering stan
- Page 31 and 32: • EN 15 1684 Bike lift • The bi
- Page 33 and 34: • EN 15 1600G1N Set of bike tools
• EN<br />
<strong>15</strong><br />
1614/4BI<br />
Universal crown race puller<br />
• material: special tool steel, hardened and tempered<br />
• surface finish: blacken to standard DIN 50938<br />
• The puller is a tool <strong>for</strong> quickly and precisely removing the headset crown<br />
race from 1", 1.1/8", 1.1/2" suspension or rigid front <strong>for</strong>k. To use, place<br />
the puller bush onto the front <strong>for</strong>k race and fix it by turning the nut. Turn<br />
the spindle attached to the steering column to pull the crown race from<br />
the <strong>for</strong>k. The product enables efficient race removal without the use of a<br />
hammer. It is intended <strong>for</strong> both professionals and home users.<br />
D D D L B<br />
620195 1" 1.1/8" 1.1/2" 351 320 3510 192,10<br />
1683/4A<br />
Crown race setting system<br />
• material: special tool steel<br />
• surface finish: blacken to standard DIN 50938<br />
• Dimension: 1’’, 1.1/4’’; 1.1/8’’ as additional parts and 1.1/2" is dimension<br />
of the tube.<br />
• The crown race setting system is intended <strong>for</strong> crown race installation<br />
on the steerer tube to fit 1’’, 1.1/4’’, 1.1/8’’, 1.1/2" diameters. The inserts<br />
are interchangeable. This tool enables quick and efficient work.<br />
338<br />
<strong>Tools</strong> <strong>for</strong> frame and <strong>for</strong>k<br />
<br />
<br />
<br />
<br />
A A A A L D<br />
620255 1" 1.1/8" 1.1/4" 1.1/2" 319 46 2500 35,39<br />
<br />
<br />
<br />
1616/4<br />
Ball race remover<br />
• material: special tool steel<br />
• surface finish: blacken to standard DIN 50938<br />
• This tool is used <strong>for</strong> removal of headsets of older bike models. To remove<br />
the ball bearing cups, tap on the tool with hammer.<br />
A B H D1 D2 D3 D4<br />
6<strong>15</strong>527 25 55 100 37 41 44 47 422 36,59<br />
1681/4<br />
Head set cup remover<br />
• material: special tool steel<br />
• surface finish: blacken to standard DIN 50938<br />
• The head set cup remover makes removal of cups 1", 1.1/8" and 1.1/4" from the<br />
frame easy<br />
L D<br />
616291 1" 1.1/8" 1.1/4" 300 40 327 14,27
Change language