Tools for bicycle service 15 - Unior

• EN
15
1672/2
Adjustable cup wrench, for older bottom bracket
models
• material: special tool steel, hardened and tempered
• The wrench is used for installing and removing of older bottom
brackets. The wrench fits perfectly in the hand while the slim body and
gap form enable quick and efficient installation and removal of older
types of bottom brackets. The length of the key is 204 mm.
346
Tools for drive
L B1 B2 A C D
618414 204 27,3 31 2,5 3 16,5 113 5,29
1621/1BI
Ratcheting bottom bracket wrench
• material: special tool steel
• ergonomic heavy duty double component handle
• 75 - teeth
• The design of the Unior ratcheting hub nut wrench enables working in hard
to reach places. New shape enables higher torque, reduces physical effort
and ensures a longer working life of the tool. Maximum torque is assured by
the shape of the handle. A perfect fit to the hand makes it comfortable to
work with.
• The ratcheting nut wrench is made for tightening and loosening nuts of 14
and 15 mm dimensions. Special pins prevent the loss of the socket.
• Interchangeable sockets: 14 mm and 15 mm
L A B
615248 14 x 15 260 71 35 380 34,93
1621/1ABI
Ratcheting bottom bracket wrench
• material: special tool steel
• 75 - teeth
• ergonomic heavy duty double component handle
• The ratchet has exchangeable screwdriver socket HX8 mm and socket
14 mm. Both are used for nuts on the crank.
L A B
616288 14 8 260 91 35 381 35,02
1607/4
Bottom bracket shell installation tool
• material: special tool steel
• surface finish: blacken to standard DIN 50938
• This tool is used for the installation and removal of the bottom bracket
shell of 35, 8 mm and 36, 3 mm. It is made of quality steel with heat
treatment and surface protection. The advantage of the tool is that it
prevents slipping off the shell.
A B D1 D2 D3
616293 220 290 36,5 32 54 1750 35,85