Bright House Networks Information Services ... - AT&T Clec Online

Version 4Q01: 12/01/01
Attachment 4-Central Office
Page 28
reduction in power, the Simple Augment fee will apply. In Florida and Tennessee the
Power Reconfiguration Only
Application Fee as set forth in Exhibit B will apply. If modifications are requested in
addition to the increase or reduction of power, the Subsequent Application Fee will
apply. AT&T will bill this nonrecurring fee on the date that AT&T provides an
Application Response to ’s Subsequent Application.
8.9.4.1 In Central Offices in Alabama and Louisiana, if has
existing power configurations currently served from the AT&T main power
board and requests that its power be reconfigured to connect to a AT&T
BDFB, in a specific AT&T Premises, must submit a
Subsequent Application to AT&T. AT&T will provide a response to such
application within seven (7) days and no Simple Augment Application Fee will be
assessed by AT&T for this one time only power reconfiguration to a AT&T
BDFB. For any power reconfigurations thereafter, will
submit a Subsequent Application and the appropriate Simple Augment
Application Fee will apply.
8.9.5 If elects to install its own DC Power Plant, AT&T
shall provide AC power to feed ’s DC Power Plant.
Charges for AC power will be assessed on a per breaker ampere, per month basis,
pursuant to the rates specified in Exhibit B. The AC power rates include recovery
for the provision of commercial and standby AC power. When obtaining power
from a AT&T service panel, protection devices and power cables must be
engineered (sized) and installed by ’s AT&T Certified
Supplier, with the exception that AT&T shall engineer and install protection
devices and power cables for Adjacent Collocation. ’s
AT&T Certified Supplier must provide a copy of the engineering power
specifications prior to the Commencement Date. AC power voltage and phase
ratings shall be determined on a per location basis. At ’s
option, may arrange for AC power in an adjacent
collocation arrangement from a retail provider of electrical power.
8.9.6 shall contract with a AT&T Certified Supplier to
perform the installation and removal of dedicated power cable support structure
within ’s arrangement and terminations of cable within
the Collocation Space.
8.9.8 Fused Amp Power. In all states, except as otherwise set forth in this Agreement,
AT&T shall make available -48V DC power on a per fused amp, per month
basis, pursuant to the following: For power provisioned from a BDFB. The number of
fused amps requested by on its collocation application for
power that is being provisioned from a AT&T BDFB will be multiplied
by the DC power fused amp rate set forth in Exhibit B. A minimum of ten
CCCS 158 of 369