Bright House Networks Information Services ... - AT&T Clec Online

Attachment 4-Central Office
Page 6
exhausted, where the Adjacent Arrangement does not interfere with access to existing
or planned structures or facilities on the Premises property. The Adjacent
Arrangement shall be constructed or procured by BHN and in conformance with
AT&T’s design and construction specifications. Further, BHN shall construct,
procure, maintain and operate said Adjacent Arrangement(s) pursuant to all of the
rates, terms and conditions set forth in this Attachment.
3.4.1 Should BHN elect such option, BHN must arrange with a Certified Supplier to
construct an Adjacent Arrangement structure in accordance with AT&T’s guidelines
and specifications. AT&T will provide guidelines and specifications upon request.
Where local building codes require enclosure specifications more stringent than
AT&T’s standard specification, BHN and BHN’s Certified Supplier must comply with
the more stringent local building code requirements. BHN’s Certified Supplier shall be
responsible for filing and receiving any and all necessary zoning, permits and/or
licenses for such construction. BHN’s Certified Supplier shall bill BHN directly for all
work performed for BHN pursuant to this Attachment and AT&T shall have no
liability for nor responsibility to pay such charges imposed by BHN’s Certified
Supplier. BHN must provide the local AT&T building contact with two cards, keys or
other access device used to enter the locked enclosure. Except in cases of emergency,
AT&T shall not access BHN’s locked enclosure prior to notifying BHN.
3.4.2 BHN must submit its plans and specifications to AT&T with its Firm Order. AT&T
shall review BHN’s plans and specifications prior to construction of an Adjacent
Arrangement(s) to ensure compliance with AT&T’s guidelines and specifications.
AT&T shall complete its review within fifteen (15) calendar days after receipt of plans
and specifications. AT&T will have the right to inspect the Adjacent Arrangement
during and after construction to make sure it is constructed according to the submitted
plans and specifications. AT&T shall require BHN to remove or correct within seven
(7) calendar days at BHN’s expense any structure that does not meet these plans and
specifications or, where applicable, AT&T’s guidelines and specifications.
3.4.3 BHN shall provide a concrete pad, the structure housing the arrangement,
heating/ventilation/air conditioning (“HVAC”), lighting, and all facilities that connect
the structure (i.e. racking, conduits, etc.) to the AT&T point of demarcation. At
BHN’s option, and where the local authority having jurisdiction permits, AT&T shall
provide an AC power source and access to physical collocation services and facilities
subject to the same nondiscriminatory requirements as applicable to any other physical
collocation arrangement. In Louisiana, AT&T will provide DC power to Adjacent
Collocation sites where technically feasible, as that term has been defined by the FCC.
BHN’s Certified Supplier shall be responsible, at BHN’s expense, for filing and
receiving any and all necessary zoning, permits and/or licenses for such arrangement.
AT&T shall allow Shared (Subleased) Caged Collocation within an Adjacent
Arrangement pursuant to the terms and conditions set forth herein.
3.5 Co-Carrier Cross Connect (CCXC). The primary purpose of collocation is for a
telecommunications carrier to interconnect with AT&T's network or to access AT&T's
Version 4Q01: 12/01/01
CCCS 136 of 369