Model i-C10 - Omron Healthcare
Model i-C10 - Omron Healthcare
Model i-C10 - Omron Healthcare
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
3. Using the Unit<br />
Selecting the User ID<br />
Select your user ID. Always use the same user ID when taking a<br />
measurement. The unit stores the measurement values in the memory<br />
by the user ID selected. These measurement values are used to<br />
calculate the morning averages and evening averages.<br />
Slide the user ID selection switch up or down to select user A or B.<br />
Using the User ID<br />
When you select a user ID the unit can be set to take one<br />
measurement using the single mode or three consecutive<br />
measurements using the auto mode when you press the O/I START<br />
button.<br />
Note: The default value is set to the single mode to take one<br />
measurement.<br />
The auto mode takes three consecutive measurements. The unit will<br />
inflate the cuff and take three measurements separated by a short<br />
interval of time between each measurement.<br />
22
Change language