Model i-C10 - Omron Healthcare
Model i-C10 - Omron Healthcare Model i-C10 - Omron Healthcare
3. Using the Unit 20 6. When the cuff is positioned correctly, close the fabric fastener FIRMLY. Notes: • Make certain the cuff fits snugly around your arm. • The cuff should make good contact with your skin. You should be able to fit your index finger between the cuff and your arm easily, so you can pull the cuff off and on. • Make sure that there are no kinks in the air tubing. Taking Measurements on the Right Arm Please note the following points when applying the cuff to your right arm. Apply the cuff so that the air tube is at the side of your elbow. Notes: • Be careful not to rest your arm on the air tube, or otherwise restrict the flow of air to the cuff. • Apply the arm cuff so that no part of the cuff is positioned over the elbow joint. The cuff should be 1 to 2 cm above the elbow. • If used 2 times per day, the cuff will last for 3 years. • The blood pressure can differ between the right arm and the left arm, and therefore also the measured blood pressure values can be different. Omron recommends to always use the same arm for measurement. If the values between the two arms differ substantially, please check with your physician which arm to use for your measurement.
3.3 Taking a Reading 3. Using the Unit The unit is designed to take measurements and store the measurement values in the memory for two people using user ID A and user ID B. The unit can also be used to take a single measurement for other persons using the guest mode. The user ID symbol is not displayed when using the guest mode. Measurements taken using the guest mode are not stored in the memory. Using the Guest Mode 1. Press and hold the O/I START button until the A and B user symbols disappear from the display. Press for at least 3 seconds 2. Release the O/I START button. The cuff starts to inflate automatically. A and B display goes out Note: To stop the inflation press and release the O/I START button. The unit will stop inflating, start deflation and turn off. 3. Inflation stops and the measurement is started. When the measurement is completed, your blood pressure and pulse rate appear on the display. 21 EN
- Page 1 and 2: Digital Automatic Blood Pressure Mo
- Page 3 and 4: Before using the unit Introduction
- Page 5 and 6: Important Safety Information (Optio
- Page 7 and 8: Arm Cuff M. Arm cuff (Medium cuff:
- Page 9 and 10: Package Contents AG.Four “AA” a
- Page 11 and 12: Battery Life & Replacement 2. Prepa
- Page 13 and 14: 4. Repeat steps 2 and 3 to set the
- Page 15 and 16: 2. Preparation Notes: • Please en
- Page 17 and 18: 3. Using the Unit Notes: • Correc
- Page 19: 3. Hold the grip on the cuff secure
- Page 23 and 24: Using the Single Mode 1. Select you
- Page 25 and 26: Selecting the Auto Mode Auto Mode m
- Page 27 and 28: Using the Auto Mode 1. Select your
- Page 29 and 30: Important: • If your systolic or
- Page 31 and 32: 3.4 Instructions for Special Condit
- Page 33 and 34: 3. Using the Unit 3. Press the MEMO
- Page 35 and 36: About the Weekly Averages 3. Using
- Page 37 and 38: Notes on Display Combinations 3. Us
- Page 39 and 40: 4. Quick Reference Guide 4. Quick R
- Page 41 and 42: 5.2 Troubleshooting 5. Handling Err
- Page 43 and 44: 7. Optional Parts AC Adapter "R" R
- Page 45 and 46: 8. Technical Data Important informa
- Page 47 and 48: mmHg 200 150 100 50 6 12 18 24 Time
3. Using the Unit<br />
20<br />
6. When the cuff is positioned correctly,<br />
close the fabric fastener FIRMLY.<br />
Notes:<br />
• Make certain the cuff fits snugly around your arm.<br />
• The cuff should make good contact with your skin. You should<br />
be able to fit your index finger between the cuff and your arm<br />
easily, so you can pull the cuff off and on.<br />
• Make sure that there are no kinks in the air tubing.<br />
Taking Measurements on the Right Arm<br />
Please note the following points when<br />
applying the cuff to your right arm. Apply the<br />
cuff so that the air tube is at the side of your<br />
elbow.<br />
Notes:<br />
• Be careful not to rest your arm on the air<br />
tube, or otherwise restrict the flow of air to<br />
the cuff.<br />
• Apply the arm cuff so that no part of the<br />
cuff is positioned over the elbow joint. The<br />
cuff should be 1 to 2 cm above the elbow.<br />
• If used 2 times per day, the cuff will last for 3 years.<br />
• The blood pressure can differ between the right arm and the left arm,<br />
and therefore also the measured blood pressure values can be<br />
different. <strong>Omron</strong> recommends to always use the same arm for<br />
measurement. If the values between the two arms differ substantially,<br />
please check with your physician which arm to use for your<br />
measurement.
Change language