FTA Manual.pdf - Industrial Air

Safety
2.3 Standarts and Norms
2.4 CE MARKING
63 9810.0156 – Rev.04 –12/01/2007
DIN 4109 Sound insulation in buildings;
requirements and testing
DIN 4755 Technical
installation,
regulation for oil firing
DIN 4756 Gas usage applications for Heating
DIN EN 267 Forced draught oil burners
DIN EN 676 Automatic forced draught burners for
gaseous fuels,
EnEV Determinants of residential space
heating expenditures
DIN EN 12828 Heating systems in buildings ,
DIN EN 12831 Heating systems in buildings design,
DIN 1986 Drainage systems on private ground ,
DIN 18160 Chimneys
DIN 4753 Water heaters and water heating
DIN 4705
installations for drinking water and
service water,
Chimney systems
EN 50165 Electrical equipment of non-electric
appliances for household and similar
purposes
DVGW VP 113 Systems of gas appliances and flue
gas piping
Arrangements of Local Energy and Gas Distrubition
Companies
YAKUT boiler range is certified “CE” by French
Notified Body (CERTIGAZ), satisfying the requirements of
the following directives :
GAD/90/396 CEE, BED/92/42 CEE, LOW VOLTAGE
/73/23 CEE, EMC 89/336
The boilers are tested according the following standards:
EN303/1 - EN303/2 - EN303/3 - EN304 -
EN304/A1
These boilers must be equipped either with a forced
draught gas burner or with a forced draught oil burner ,
recommended by BAYMAK .These burners must be in
conformity with the following standards:
EN267 / EN676. The gas burner must be a EC burner.
BAYMAK declares the conformity of all the
boilers presented in this manual by referring to those
which are tested for CE marking and also to GAD and
BED directives.
8 www.baymak.com.tr