FTA Manual.pdf - Industrial Air

More documents

Recommendations

Info

Installation / System 5. Installation/ System 5.1 Heating System Connection 63 9810.0156 – Rev.04 –12/01/2007 Connect the heating system to inlet and outlet of the boiler. Mount the filling and discharging connection and its valve to related connection field at back side of the boiler. Move the boiler to its operation area and balance it with the balancing bolts. Mount the safety equipments connections. Maximum opening pressure can not be upper than 3 bar (maximum operating pressure). Connect the safety valves (at inlet and oultet of boiler), expansion pipes and safety valve in accordance with the boiler.Ensure that expansion tank is filled by water and water level and direction of installation is correct. All pipes must be iron made. Usage of the plastic pipes are forbidden. Connect the closed expansion tank and the safety valve to the boiler properly at the closed heating installation.Be sure that the expansion tank is full with water and water pressure is suitable. Caution: Safety valve must be mounted onto boiler directly according to related standards. There must not be any valve, diameter reducer equipment, pump and these kind of equipments between boiler and safety valve. Safety valve must be unadjustable and suitable to CE standards and connection diameter. There must be a safety valve at tne nearest point to the boiler on the safety valve installation. In case of incompliance to the explanations mentioned on the top, the boiler will be out of warranty and manufacturer company is not responsible for physical and sipiritual damages. 32 www.baymak.com.tr
63 9810.0156 – Rev.04 –12/01/2007 Installation / System The safety valve drainage line must be arranged when there is no pressure increase and during the time when safety valve operates. This line must not be installed against an open place; the drainage end must be open and tracable. The heating system water coming out at determined circumstances must be releasing without danger. Caution: <strong>Air</strong> release equipments must be placed to convenient points to release the air that will be occured during circulation and/or first filling application. If these equipments are not mounted to suitable places or/and equipments whose CE marker is not available are used, manufacturer company is not responsible for physical and sipiritual damages. Caution: The equipments and installation must be compatible with each other for working correctly and effectively. All of safety equipments which may directly effect the operation of boiler must be covenient with CE standards. If these equipments is not choosen or placed rightly, manufacturer company is not responsible for physical and sipiritual damages. The corrosion resistance of metal materiaI,used at hot water devices, depends on oxygen that is not exist in heating water. There will not be any damage after oxygen, mixed with first or addition water into the system, reacts with other materials. Transformation of water to black colour is a sign that there is no free waste oxygen in the system. Technical rules, especially VDI-Instruction 2035-2, suggest that heating system needs to be designed and operated in a way that oxygen inlet is not possible to heating water. At the floor heating systems, to prevent intransitive diffusion of oxygen to pass trough pipe walls, it is suggested to use plastic pipe which is convenable to DIN 4726. For floor heating systems which is not resistant against oxygen,system separation must be done by an exchanger. 33
Page 1 and 2: YAKUT-ELMAS / YAKUT PLUS ELMAS PLUS
Page 3 and 4: Table of Contents: CAUTION! 6. Oper
Page 5 and 6: 1.2 Symbols in the manual 1.3 Users
Page 7 and 8: 63 9810.0156 - Rev.04 -12/01/2007 S
Page 9 and 10: 3. Installation 3.1 Delivery Conten
Page 11 and 12: 63 9810.0156 - Rev.04 -12/01/2007 I
Page 13 and 14: BOILER TYPE 3.2 Space Requirement f
Page 15 and 16: 63 9810.0156 - Rev.04 -12/01/2007 I
Page 17 and 18: Installation 3.6 Gas Blown Burners
Page 19 and 20: 3.9 Before First Start -Up 63 9810.
Page 21 and 22: 3.10 Control of water pressure 3.11
Page 23 and 24: 4. Mounting 63 9810.0156 - Rev.04 -
Page 25 and 26: 63 9810.0156 - Rev.04 -12/01/2007 M
Page 27 and 28: 4.2 Burner mounting . 63 9810.0156
Page 29 and 30: 63 9810.0156 - Rev.04 -12/01/2007 M
Page 31: 63 9810.0156 - Rev.04 -12/01/2007 M
Page 35 and 36: 63 9810.0156 - Rev.04 -12/01/2007 I
Page 37 and 38: 5.3 Chimney Connection 63 9810.0156
Page 39 and 40: 5.4 Installation of Shunt Pump 63 9
Page 41 and 42: 6.2 Temperatures of Installation Wa
Page 43 and 44: 6.4 Training of Operator 63 9810.01
Page 45 and 46: Assemble of Turbulators : 63 9810.0
Page 47 and 48: Suggestions for Energy Saving 8. Su
Page 49 and 50: 9. Important Cautions 9.1 Important
Page 51 and 52: 10. Technical Data 10.1 Technical D
Page 53 and 54: 63 9810.0156 - Rev.04 -12/01/2007 T
Page 55 and 56: 63 9810.0156 - Rev.04 -12/01/2007 W

FTA Manual.pdf - Industrial Air

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?