FTA Manual.pdf - Industrial Air
FTA Manual.pdf - Industrial Air
FTA Manual.pdf - Industrial Air
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4.2 Burner mounting<br />
.<br />
63 9810.0156 – Rev.04 –12/01/2007<br />
Mounting<br />
Take into consideration directions about burner<br />
mounting!<br />
Caution : Burner that is choosen for burner must<br />
have CE Certification. Boiler and burner must be<br />
compatible eachother exactly.<br />
Burner must be choosen by authorized engineer<br />
or manufacturer firm. All parameters which may effect<br />
the accordance between burner and boiler ( boiler<br />
capacity, combustion chamber flame lenght , diameter<br />
of boiler-burner, connection flange, cover thickness)<br />
need to be calculated.<br />
Caution : If there is no CE certification of burner<br />
and if burner is not in accordance with boiler , it will be out<br />
of warranty.<br />
Caution : First start-upmust be made by an<br />
authorized service personel. Otherwise; boiler will be out<br />
of warranty conditions. Manufacturer company is not<br />
responsible for physical or sipiritual damages<br />
Please apply mounting direction defined next pages<br />
for burner mounting application. In case of incompliance of<br />
burner mounting directions, boiler will be out of warranty for<br />
damages that will occure.<br />
Boiler water temperature must be set 55 0 C at gas or<br />
fluid fuels burner mounting<br />
27
Change language