pSOSystem System Calls - Read

pHILE+ System Calls pcinit_vol
Notes
See Also
1. All data stored on the volume is lost by execution of this call.
2. The volume's hardware media must have been formatted before this call is
executed.
3. A mounted volume cannot be initialized.
4. An MS-DOS volume must be formatted using the MS-DOS FORMAT utility or
another comparable utility provided by some SCSI Controller Board vendors,
not pcinit_vol(). After that, pcinit_vol() can be used to reinitialize the
volume. pcinit_vol() reads the partition’s boot record, not the master boot
record (which was written by FORMAT), to get the partition’s parameters.
pcmount_vol, init_vol
pSOSystem System Calls 2-87
2