06.08.2013 Views

Regulation of Fuels and Fuel Additives: Renewable Fuel Standard ...

Regulation of Fuels and Fuel Additives: Renewable Fuel Standard ...

Regulation of Fuels and Fuel Additives: Renewable Fuel Standard ...

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

(ii) The value for EEEEEE in an extra-value batch-RIN when a batch-RIN is initially<br />

generated by a renewable fuel producer or importer shall be the applicable volume<br />

<strong>of</strong> renewable fuel calculated according to the following formula:<br />

Where:<br />

Va = (EV - 1.0) * Vs<br />

Va = Applicable volume <strong>of</strong> renewable fuel, in gallons, for use in designating the value<br />

<strong>of</strong> EEEEEE.<br />

EV= Equivalence value for the renewable fuel per §80.1115.<br />

Vs = St<strong>and</strong>ardized volume <strong>of</strong> the batch <strong>of</strong> renewable fuel at 60 o F, in gallons.<br />

(7) St<strong>and</strong>ardization <strong>of</strong> volumes. In determining the st<strong>and</strong>ardized volume <strong>of</strong> a batch <strong>of</strong><br />

renewable fuel for purposes <strong>of</strong> generating st<strong>and</strong>ard-value batch-RINs or extravalue<br />

batch-RINs, pursuant to paragraphs (c)(5) <strong>and</strong> (c)(6) <strong>of</strong> this section, the<br />

batch volumes shall be adjusted to a st<strong>and</strong>ard temperature <strong>of</strong> 60 o F.<br />

(i) For ethanol, the following formula shall be used:<br />

Where:<br />

Vs,e = Va,e * (-0.0006301 x T + 1.0378)<br />

Vs,e = St<strong>and</strong>ardized volume <strong>of</strong> ethanol at 60 o F, in gallons.<br />

Va,e = Actual volume <strong>of</strong> ethanol, in gallons.<br />

T = Actual temperature <strong>of</strong> the batch, in o F.<br />

(ii) For biodiesel (mono alkyl esters), the following formula shall be used:<br />

Where:<br />

Vs,b = Va,b * (-0.0008008 x T + 1.0480)<br />

Vs,b = St<strong>and</strong>ardized volume <strong>of</strong> biodiesel at 60 o F, in gallons.<br />

Va,b = Actual volume <strong>of</strong> biodiesel, in gallons.<br />

T = Actual temperature <strong>of</strong> the batch, in o F.<br />

(iii) For other renewable fuels, an appropriate formula commonly accepted by the<br />

industry shall be used to st<strong>and</strong>ardize the actual volume to 60 o F.<br />

(d) Assignment <strong>of</strong> batch-RINs to batches.<br />

(1) The producer or importer <strong>of</strong> a batch <strong>of</strong> renewable fuel must assign st<strong>and</strong>ard-value<br />

RINs to the batch <strong>of</strong> renewable fuel that those batch-RINs represent.<br />

(2) The producer or importer <strong>of</strong> a batch <strong>of</strong> renewable fuel may assign extra-value<br />

batch-RINs to the batch <strong>of</strong> renewable fuel that those batch-RINs represent.<br />

(3) A batch-RIN is assigned to a batch when the batch-RIN is recorded in a<br />

prominent location on a product transfer document assigned to that batch <strong>of</strong><br />

renewable fuel per §80.1153.<br />

§ 80.1127 How are RINs used to demonstrate compliance?<br />

(a) <strong>Renewable</strong> volume obligations.<br />

- 213 -

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!