KODAK ESP 5200 Series All-in-One Printer - Maplin Electronics

Maintaining Your Printer
To update the printer firmware:
1. Make sure that your computer is connected to the Internet.
2. Connect the printer to the computer with a USB cable or wirelessly (if not
currently connected).
3. Open Home Center Software, and make sure that KODAK ESP 5200 Series AiO
- Connected appears in the lower left corner of the Home Center Software
window.
4. Click Tools and Documentation.
5. Under Web Links, click Check for Printer (Firmware) Updates.
6. If there are updates, click Next and follow the on-screen instructions.
IMPORTANT: Do not turn off or unplug your printer or your computer during the update.
Doing so may cause the printer to become inoperable.
Updating if your printer is connected to a computer with MAC OS
To update the software:
1. Make sure that your computer is connected to the Internet.
2. Open Home Center Software.
3. On the KODAK AiO Home Center menu, select Check for Updates.
4. If there are software updates, follow the on-screen instructions for updating
your software.
To update the firmware:
1. Go to www.kodak.com/go/esp5210downloads or
www.kodak.com/go/esp5250downloads.
2. Connect the printer to the computer with a USB cable or wirelessly (if not
currently connected).
3. Select your operating system from the drop-down list.
4. Click Select in the Firmware box.
5. Read the instructions, click Download, then follow the on-screen instructions.
IMPORTANT: Do not turn off or unplug your printer or your computer during the update.
48 www.kodak.com/go/aiosupport