KODAK ESP 5200 Series All-in-One Printer - Maplin Electronics
KODAK ESP 5200 Series All-in-One Printer - Maplin Electronics KODAK ESP 5200 Series All-in-One Printer - Maplin Electronics
KODAK ESP 5200 Series All-in-One Printer Adding a wireless network connection to a USB-connected computer You can change the way you connect to your printer at any time. Changing from USB to a wireless connection To change the printer connection type from USB to a wireless (Wi-Fi) network: If your printer is connected to a computer with WINDOWS OS: 1. Unplug the USB cable from your printer and computer. 2. On the printer control panel, press Home. 3. Press to select Network Settings, then press OK. 4. Press to select View Network Configuration, press OK, then confirm you have a non-zero IP address. 5. If you have not already done so, connect your printer to your wireless network. See Connecting to a wireless network, page 5. 6. On your computer, disable any firewall you have installed until you have successfully completed the installation. For more information on firewalls, go to www.kodak.com/go/inkjetnetworking. 7. Select Start > All Programs > Kodak > Kodak Printer Network Setup Utility. • If your wireless all-in-one printer (example: KodakESP5200+1133) is not listed: a. Select No, my printer is not listed, then click Next. b. Select your printer from the list. c. Select Network - Wireless/WiFi, then click Next. When your printer is detected, driver installation begins. • If your wireless all-in-one printer (example: KodakESP5200+1133) is listed: a. Highlight the all-in-one printer that is connected to your network. b. Select Yes, my printer is listed, then click Next. When your printer is detected, driver installation begins. 8. When driver installation is complete, click Done. The printer with a wireless connection is listed as the name of the printer plus a number (for example, KodakESP5200+1133). www.kodak.com/go/aiosupport 11
Networking Your Printer If your printer is connected to a computer with MAC OS: 1. Unplug the USB cable from your printer and computer. 2. On the printer control panel, press Home. 3. Press to select Network Settings, then press OK. 4. Press to select View Network Configuration, press OK, then confirm you have an IP address. 5. Select Apple > System Preferences. 6. Under Hardware, select Print & Fax. 7. In the Print & Fax dialog box, click +. 8. Select your printer from the list, then click Add. The printer with a wireless connection is listed as the name of the printer plus a number (for example, KodakESP5200+1133). 12 www.kodak.com/go/aiosupport
- Page 1 and 2: KODAK ESP 5200 Series All-in-One Pr
- Page 3 and 4: Table of contents 1 Printer Overvie
- Page 5 and 6: KODAK ESP 5200 Series All-in-One Pr
- Page 7 and 8: Printer Overview Control panel Feat
- Page 9 and 10: Printer Overview • Language - Pre
- Page 11 and 12: Networking Your Printer The Wi-Fi c
- Page 13 and 14: Networking Your Printer Using the L
- Page 15: Networking Your Printer Printing th
- Page 19 and 20: Handling Paper Envelope sizes Loadi
- Page 21 and 22: Handling Paper Loading envelopes Th
- Page 23 and 24: Printing Printing pictures Printing
- Page 25 and 26: Printing 4. Repeat step 3 for each
- Page 27 and 28: Printing Zooming and cropping pictu
- Page 29 and 30: 5 Copying Copying a document You ca
- Page 31 and 32: Copying Copy Document Option Plain
- Page 33 and 34: Copying Darkening or lightening a c
- Page 35 and 36: Copying Adjusting the settings and
- Page 37 and 38: Copying Enlarging or reducing a pho
- Page 39 and 40: 6 Scanning Scanning digitizes docum
- Page 41 and 42: Scanning Setting Options Automatica
- Page 43 and 44: Scanning 4. Press to select an opti
- Page 45 and 46: Maintaining Your Printer Cleaning t
- Page 47 and 48: Maintaining Your Printer 3. Pinch t
- Page 49 and 50: Maintaining Your Printer Replacing
- Page 51 and 52: Maintaining Your Printer 8. Place t
- Page 53 and 54: Maintaining Your Printer To update
- Page 55 and 56: 8 Troubleshooting Basic troubleshoo
- Page 57 and 58: Troubleshooting Status lights Power
- Page 59 and 60: Product and Safety Specifications C
- Page 61 and 62: Product and Safety Specifications S
- Page 63 and 64: Product and Safety Specifications S
- Page 65 and 66: Product and Safety Specifications C
<strong>KODAK</strong> <strong>ESP</strong> <strong>5200</strong> <strong>Series</strong> <strong>All</strong>-<strong>in</strong>-<strong>One</strong> Pr<strong>in</strong>ter<br />
Add<strong>in</strong>g a wireless network connection to a USB-connected computer<br />
You can change the way you connect to your pr<strong>in</strong>ter at any time.<br />
Chang<strong>in</strong>g from USB to a wireless connection<br />
To change the pr<strong>in</strong>ter connection type from USB to a wireless (Wi-Fi) network:<br />
If your pr<strong>in</strong>ter is connected to a computer with WINDOWS OS:<br />
1. Unplug the USB cable from your pr<strong>in</strong>ter and computer.<br />
2. On the pr<strong>in</strong>ter control panel, press Home.<br />
3. Press to select Network Sett<strong>in</strong>gs, then press OK.<br />
4. Press to select View Network Configuration, press OK, then confirm you<br />
have a non-zero IP address.<br />
5. If you have not already done so, connect your pr<strong>in</strong>ter to your wireless network.<br />
See Connect<strong>in</strong>g to a wireless network, page 5.<br />
6. On your computer, disable any firewall you have <strong>in</strong>stalled until you have<br />
successfully completed the <strong>in</strong>stallation. For more <strong>in</strong>formation on firewalls, go to<br />
www.kodak.com/go/<strong>in</strong>kjetnetwork<strong>in</strong>g.<br />
7. Select Start > <strong>All</strong> Programs > Kodak > Kodak Pr<strong>in</strong>ter Network Setup Utility.<br />
• If your wireless all-<strong>in</strong>-one pr<strong>in</strong>ter (example: Kodak<strong>ESP</strong><strong>5200</strong>+1133) is not<br />
listed:<br />
a. Select No, my pr<strong>in</strong>ter is not listed, then click Next.<br />
b. Select your pr<strong>in</strong>ter from the list.<br />
c. Select Network - Wireless/WiFi, then click Next.<br />
When your pr<strong>in</strong>ter is detected, driver <strong>in</strong>stallation beg<strong>in</strong>s.<br />
• If your wireless all-<strong>in</strong>-one pr<strong>in</strong>ter (example: Kodak<strong>ESP</strong><strong>5200</strong>+1133) is listed:<br />
a. Highlight the all-<strong>in</strong>-one pr<strong>in</strong>ter that is connected to your network.<br />
b. Select Yes, my pr<strong>in</strong>ter is listed, then click Next.<br />
When your pr<strong>in</strong>ter is detected, driver <strong>in</strong>stallation beg<strong>in</strong>s.<br />
8. When driver <strong>in</strong>stallation is complete, click Done.<br />
The pr<strong>in</strong>ter with a wireless connection is listed as the name of the pr<strong>in</strong>ter plus a<br />
number (for example, Kodak<strong>ESP</strong><strong>5200</strong>+1133).<br />
www.kodak.com/go/aiosupport 11