DVD - Maplin Electronics

The Keypad
1. IR (infra-red) Indicator
The IR Indicator animates when IR is being “sent” or
“received”. The KAMELEON 8 animated IR Indicator will
show “outgoing IR” whenever a function key is pressed.
When using the “Learning Procedure” or “Code Upgrade
Procedure” the animated IR indicator will show “incoming
IR”. Outgoing IR will be indicated by an “outside to inside”
animation of the IR Indicator. Ingoing IR will be indicated
by an “inside to outside” animation of the IR Indicator. The
IR Indicator will give feedback when keys are pressed both
during normal use and in programming mode (middle segment
of the IR Indicator will blink).
2. Device keys
The TV, SAT, DVD, VCR, PVR, CD, AUD and LIGHT keys select the device to be
controlled. For example pressing the TV key allows the remote to control
the functions of your Television, after pressing VCR you can operate your
Video Recorder, after pressing the SAT key you can operate your Satellite
Receiver or Cable Converter etc. (see page 2 for more details). After pressing
a device (mode) key on your KAMELEON 8 the applicable device icon will
animate, to show the currently activated mode. Pressing the device key will
allow you to return to the main screen (TV, SAT and AUD modes). The
KAMELEON 8 also features a “LIGHT” mode. Together with a separately
available “ONE FOR ALL Light Control Starters Kit - HC-8300”, this allows
you to dim and switch ON/OFF lights through-out your whole house.
3. MAGIC (in ”shifted” or ”programming” mode)
The MAGIC key is used to set up your KAMELEON 8 and to
access special functions. If you press this key shortly, the
screen will go into ”shifted” mode (for 10 seconds) which
will give access to some secondary functions such as color,
brightness and sleeptimer.
DEV SET
SEARCH
MODE
KEY MAGIC
MACRO
BRIGHT
LEARN
IR DELETE
VOLUME
OTHER
Programming mode
If you press the MAGIC key longer (about 3 seconds), the
KAMELEON 8 will enter ”programming” mode. The screen
will change to the “setup screen”.
• Device Setup mode
• Search Method
• Mode re-assignment
• To program missing functions
• To setup a key (I, II, III, IV) with a Sequence of
commands
• “EL” Screen brightness adjustment
• To copy functions from your original working remote
onto the KAMELEON 8
• Deleting learned and Key Magic functions
• Volume punch through feature
• Variable EL On time (4 sec, 8 sec, 12 sec, 16 sec, 20 sec)
• Operational Reset
• KAMELEON 8 - Timer
• EL screen activation setting
• Code Verification
• Modem Upgrade
WWW.ONEFORALL.COM 7