DVD - Maplin Electronics

“EL” On time setting
The Keypad
To change the duration (default: 8 sec.) that the KAMELEON 8 “EL” screen will be
ON, after each keypress during use of the remote (not programming mode):
1. Press and hold the MAGIC key for about 3 seconds.
The screen will change to the setup screen.
2. Press OTHER.
3. Press 9 7 8. The IR Indicator will blink twice.
4. Press 1, 2, 3, 4 or 5 (e.g. 1 = 4 seconds) depending on
your choice, see table below. The animated IR Indicator
will blink twice. Press ENTER to store the new EL on time
setting and to return to the SETUP screen OR press ESC
to return to the previously set EL on-time setting.
Selection “EL” On Time
1 4 seconds
2 8 seconds (default)
3 12 seconds
4 16 seconds
5 20 seconds
WWW.ONEFORALL.COM 5