Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
1.11.4 MIB (Manual Interface Board) Display Diagnostics<br />
DISPLAY LED EXPLANATION<br />
Drain<br />
Vat # (The vat number is followed by<br />
an “L” to indicate left side of a split<br />
vat or an “r” to indicate the right side<br />
of a split vat or a full vat.)<br />
On Drain valve on vat # is open<br />
Vat # (The vat number is followed by<br />
an “L” to indicate left side of a split<br />
vat or an “r” to indicate the right side<br />
of a split vat or a full vat.)<br />
Off Drain valve on vat # is closed<br />
Vat # (The vat number is followed by Blink Drain valve on vat # is opening or closing or an<br />
an “L” to indicate left side of a split<br />
vat or an “r” to indicate the right side<br />
of a split vat or a full vat.)<br />
Return<br />
error condition may exist.<br />
Vat # (The vat number is followed by<br />
an “L” to indicate left side of a split<br />
vat or an “r” to indicate the right side<br />
of a split vat or a full vat.)<br />
On Return valve on vat # is open<br />
Vat # (The vat number is followed by<br />
an “L” to indicate left side of a split<br />
vat or an “r” to indicate the right side<br />
of a split vat or a full vat.)<br />
Off Return valve on vat # is closed<br />
Vat # (The vat number is followed by Blink Return valve on vat # is opening or closing or an<br />
an “L” to indicate left side of a split<br />
vat or an “r” to indicate the right side<br />
of a split vat or a full vat.)<br />
Network<br />
error condition may exist<br />
N<br />
Resetting<br />
Network error, displays for 10 seconds if no<br />
communications are received from the M3000<br />
within 10 seconds after power on or MIB reset.<br />
r<br />
Miscellaneous<br />
An “r” is displayed for ten seconds or until<br />
communication is received from the M3000 after a<br />
power on or MIB reset.<br />
E alternating with vat # (The vat Blink The circuit has an issue. Ensure the actuator is<br />
number is followed by an “L” to<br />
plugged in. Ensure the CAN connections are all<br />
indicate left side of a split vat or an<br />
“r” to indicate the right side of a split<br />
vat or a full vat.)<br />
securely plugged into the connectors.<br />
Indicates the AIF temperature sensor did not detect<br />
a full vat during filtration.<br />
A Manual LED off The system is in auto filtration mode.<br />
Vat # (The vat number is followed by<br />
an “L” to indicate left side of a split<br />
vat or an “r” to indicate the right side<br />
of a split vat or a full vat.)<br />
Manual LED on The system is in manual mode.<br />
P This will only be displayed in auto filtration mode.<br />
Filter pan is improperly seated. Any auto filtration<br />
messages received at this time are ignored.<br />
1-21