OpenVPN Access Server System Administrator Guide

when the VPN Server is OFF, these Web servers are not available through Service Forwarding
(though they can still be accessed via their configured IP address and port number).
4.2.2.2 Admin Web UI
Figure 16: Admin Web UI panel of the Server Network Settings page
The Admin Web UI can listen on the same address and port as the Client Web Server, or it can
listen on a separate address and port. In either case, the IP address and port of the Admin Web UI
Server must not be the same as the address and port of the VPN Server (use Service Forwarding
to access the Admin Web UI through the address and TCP port of the VPN Server.
4.2.2.3 Client Web Server
Figure 17: Client Web Server panel of the Server Network Settings page
The Client Web Server can be combined with the Admin Web UI, using the same IP address and
port number. Alternatively, you can specify an IP address and port number for the Client Web
Server that are different than those of the Admin Web UI.
When the Admin Web UI and Client Web Server listen on the same IP address and port number (as
in the case that both services are forwarded through the VPN Server), the Client Web Server is
accessed by the base URL ('/') while the Admin Web UI is accessed by the URL '/admin'. E.g., if
the two Web Servers are configured to use IP address 192.168.1.20 and port 443, the Client Web
Server is accessed by the URL:
OpenVPN Access Server System Administrator Guide
23