ORNL-2106 - the Molten Salt Energy Technologies Web Site

44,000
42,000
40,000
-
._
(D
8000
v1
In
w a
5
6000
PERIOD ENDING JUNE 10, 1956
UNCLASSIFIED
ORNL-LR-DWG 14737
4000
4 2 5 40 20 50 (00 200 500 3000 2000 5000 10,000
TIME (hr)
Fig. 3.5.11. Design Curves for Hastelloy W Sheet Solution Annealed at 210OOF for 2 hr and Tested
in Argon at 165OOF.
the environment. The effect of the fuel mixture on
the creep properties of Hastelloy W sheet appears
to be the same as that shown for Hastelloy B.
SHORT-TIME HIGH-TEMPERATURE TENSILE
PROPERTIES OF INCONEL
The tensile properties of In
been determined at temperatures
structural material because of its better tensile
properties in the temperature range of interest.
CREEP TESTS OF INCONEL IN FUSED SALTS
J. R. Weir, Jr.
lnconel was creep tested at 1500OF and a stress
of 3500 psi in NaF-ZrF, (50-50 mole 76) in order
to compare the severity of attack with that found
reeptests in thefuel mixture (No. 30)
sted in the nonuranium-bearing mixture,
n with the attack by the fuel mixture,
se results are further evidence that much of
attack by the fuel mixture on lnconel at 1500OF
uted to the reaction
mens were machined from welded I/,+. Inconel
sheet stock and a few creep tests were run in the
207