Satellite® T210/T230 Series User's Guide - Howard Computers
Satellite® T210/T230 Series User's Guide - Howard Computers
Satellite® T210/T230 Series User's Guide - Howard Computers
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
82<br />
Getting Started<br />
Turning off the computer<br />
To connect a printer to your computer:<br />
1 Connect the printer cable to the printer and then connect the<br />
other end to one of the computer’s USB ports.<br />
2 Plug the printer’s power cable into a live AC outlet.<br />
Setting up a printer<br />
NOTE<br />
Some printers require a specific installation process. Refer to your<br />
printer installation guide for instructions before completing the<br />
following procedure.<br />
If your printer does not support Plug and Play, follow these steps to<br />
set it up for the first time. You only need to set up the printer once.<br />
1 Click Start, Control Panel, Hardware and Sound, and then<br />
under Devices and Printers, click Add a printer.<br />
The Add Printer Wizard appears.<br />
(Sample Image) Add Printer Wizard<br />
2 Follow the on-screen instructions to set up your printer.<br />
Turning off the computer<br />
Pressing the power button before shutting down the Windows ®<br />
operating system could cause you to lose your work. Make sure the<br />
system indicator panel’s storage drive light and the drive in-use light<br />
are off. If you turn off the power while a disk/disc is being accessed,<br />
you may lose data or damage the disk/disc and/or drive.
Change language