Sewing Machine - Brother

—————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
SEWING CHARACTERS (for models equipped with character stitches)
55 characters can be sewn by following the procedure below.
Selecting characters
■ Selecting a character
[Example] Selecting stitch “C” (No. 03).
Turn on the sewing machine.
a
b
Press the character stitch key and confirm that
the character stitch indicator lights up.
a Character stitch key
b Character stitch indicator
Memo
● When you select a character, check that
there are no characters in memory.
a This indicator shows that no character is stored.
If there are any characters in memory,
delete them. (For details, refer to “Deleting
characters” (page 75).)
Press (stitch selection keys) to select
c
pattern No. 03.
For details, refer to step c of “Selecting a
stitch” (page 37).
d
Press the “+” side of (stitch width
adjustment key) to enter the selected
character.
a Stitch width adjustment key
The following display is shown on the
LCD.
a Selected pattern No.
b The position of the selected pattern No.
c The total number of entered characters
Attach the presser foot indicated on the LCD.
e
f
N
N
a The presser foot to use
For details, refer to “Replacing the presser
foot” (page 34).
If you would like to only sew this single
character, start sewing.
If you would like to sew a sequence of
characters, go to step a on “Combining
characters” (page 74).
For details on sewing characters, refer to
“Sewing the character stitches” (page 76).
73
3