Sewing Machine - Brother
Sewing Machine - Brother Sewing Machine - Brother
72 UTILITY STITCHES ————————————————————————————————————————————————————————————————————————————————————————————————————— Heirloom stitching When sewing with the wing needle, the needle holes are enlarged, creating a lace-like decorative stitch. This is used to decorate hems and tablecloths on thin or medium weight fabrics in addition to plain weave fabrics. CAUTION ● The needle threader cannot be used with the wing needle, otherwise the sewing machine may be damaged. Manually pass the thread through the eye of the needle from the front to the back. For details, refer to “Upper threading” (page 23). Insert the wing needle. a Use a 130/705H 100/16 wing needle. For details on inserting a needle, refer to “Replacing the needle” (page 30). Attach monogramming foot “N”. b Select stitch , , , , , , or . c CAUTION ● Select a stitch width of 6.0 mm (15/64 inch) or less, otherwise the needle may bend or break. ● After adjusting the stitch width, slowly turn the handwheel toward you (counterclockwise) and check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break. Start sewing. d
————————————————————————————————————————————————————————————————————————————————————————————————————————————————————— SEWING CHARACTERS (for models equipped with character stitches) 55 characters can be sewn by following the procedure below. Selecting characters ■ Selecting a character [Example] Selecting stitch “C” (No. 03). Turn on the sewing machine. a b Press the character stitch key and confirm that the character stitch indicator lights up. a Character stitch key b Character stitch indicator Memo ● When you select a character, check that there are no characters in memory. a This indicator shows that no character is stored. If there are any characters in memory, delete them. (For details, refer to “Deleting characters” (page 75).) Press (stitch selection keys) to select c pattern No. 03. For details, refer to step c of “Selecting a stitch” (page 37). d Press the “+” side of (stitch width adjustment key) to enter the selected character. a Stitch width adjustment key The following display is shown on the LCD. a Selected pattern No. b The position of the selected pattern No. c The total number of entered characters Attach the presser foot indicated on the LCD. e f N N a The presser foot to use For details, refer to “Replacing the presser foot” (page 34). If you would like to only sew this single character, start sewing. If you would like to sew a sequence of characters, go to step a on “Combining characters” (page 74). For details on sewing characters, refer to “Sewing the character stitches” (page 76). 73 3
- Page 24 and 25: 22 KNOWING YOUR SEWING MACHINE —
- Page 26 and 27: 24 KNOWING YOUR SEWING MACHINE —
- Page 28 and 29: 26 KNOWING YOUR SEWING MACHINE —
- Page 30 and 31: 28 KNOWING YOUR SEWING MACHINE —
- Page 32 and 33: 30 KNOWING YOUR SEWING MACHINE —
- Page 34 and 35: 32 KNOWING YOUR SEWING MACHINE —
- Page 36 and 37: 34 KNOWING YOUR SEWING MACHINE —
- Page 38 and 39: 36 SEWING BASICS ——————
- Page 40 and 41: 38 SEWING BASICS ——————
- Page 42 and 43: 40 SEWING BASICS ——————
- Page 44 and 45: 42 SEWING BASICS ——————
- Page 46 and 47: 44 SEWING BASICS ——————
- Page 48 and 49: 46 UTILITY STITCHES —————
- Page 50 and 51: 48 UTILITY STITCHES —————
- Page 52 and 53: 50 UTILITY STITCHES —————
- Page 54 and 55: 52 UTILITY STITCHES —————
- Page 56 and 57: 54 UTILITY STITCHES —————
- Page 58 and 59: 56 UTILITY STITCHES —————
- Page 60 and 61: 58 UTILITY STITCHES —————
- Page 62 and 63: 60 UTILITY STITCHES —————
- Page 64 and 65: 62 UTILITY STITCHES —————
- Page 66 and 67: 64 UTILITY STITCHES —————
- Page 68 and 69: 66 UTILITY STITCHES —————
- Page 70 and 71: 68 UTILITY STITCHES —————
- Page 72 and 73: 70 UTILITY STITCHES —————
- Page 76 and 77: 74 UTILITY STITCHES —————
- Page 78 and 79: 76 UTILITY STITCHES —————
- Page 80 and 81: 78 UTILITY STITCHES —————
- Page 82 and 83: APPENDIX ————————
- Page 84 and 85: 82 APPENDIX ———————
- Page 86 and 87: 84 APPENDIX ———————
- Page 88 and 89: 86 APPENDIX ———————
- Page 90 and 91: 88 APPENDIX ———————
- Page 92 and 93: 90 APPENDIX ———————
- Page 94 and 95: 92 APPENDIX ———————
- Page 96 and 97: 94 APPENDIX ———————
- Page 98 and 99: 96 APPENDIX ———————
- Page 100 and 101: 98 APPENDIX ———————
- Page 102 and 103: APPENDIX ————————
- Page 104 and 105: APPENDIX ————————
- Page 106 and 107: i APPENDIX ————————
- Page 108: English 885-V64/V65/V66/V67 XE8589-
72<br />
UTILITY STITCHES —————————————————————————————————————————————————————————————————————————————————————————————————————<br />
Heirloom stitching<br />
When sewing with the wing needle, the needle holes<br />
are enlarged, creating a lace-like decorative stitch.<br />
This is used to decorate hems and tablecloths on thin<br />
or medium weight fabrics in addition to plain weave<br />
fabrics.<br />
CAUTION<br />
● The needle threader cannot be used with the<br />
wing needle, otherwise the sewing machine<br />
may be damaged. Manually pass the thread<br />
through the eye of the needle from the front<br />
to the back. For details, refer to “Upper<br />
threading” (page 23).<br />
Insert the wing needle.<br />
a<br />
Use a 130/705H 100/16 wing needle.<br />
For details on inserting a needle, refer to<br />
“Replacing the needle” (page 30).<br />
Attach monogramming foot “N”.<br />
b<br />
Select stitch , , , , , , or .<br />
c<br />
CAUTION<br />
● Select a stitch width of 6.0 mm (15/64 inch)<br />
or less, otherwise the needle may bend or<br />
break.<br />
● After adjusting the stitch width, slowly turn<br />
the handwheel toward you<br />
(counterclockwise) and check that the needle<br />
does not touch the presser foot. If the needle<br />
hits the presser foot, the needle may bend or<br />
break.<br />
Start sewing.<br />
d