Sewing Machine - Brother
Sewing Machine - Brother
Sewing Machine - Brother
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
—————————————————————————————————————————————————————————————————————————————————————————————————————————————————————<br />
f<br />
g<br />
Position the fabric with the front end of the<br />
buttonhole mark aligned with the red marks<br />
on the sides of the buttonhole foot, and then<br />
lower the presser foot lever.<br />
2<br />
a Mark on fabric<br />
b Red marks on buttonhole foot<br />
When lowering the presser foot, do not push<br />
in the front of the presser foot, otherwise the<br />
buttonhole will not be sewn with the correct<br />
size.<br />
a Do not reduce the gap.<br />
Pull down the buttonhole lever as far as<br />
possible.<br />
a Buttonhole lever<br />
The buttonhole lever is positioned behind the<br />
bracket on the buttonhole foot.<br />
a Buttonhole lever<br />
b Bracket<br />
A<br />
1<br />
2<br />
Gently hold the end of the upper thread in<br />
h your left hand, and then start sewing.<br />
i<br />
j<br />
Note<br />
● If thick seams are being sewn and the fabric<br />
does not feed, sew with the coarser (longer)<br />
stitch.<br />
Once sewing is completed, the<br />
machine automatically sews<br />
reinforcement stitches, then stops.<br />
Raise the needle and the presser foot lever,<br />
remove the fabric, and cut the thread.<br />
Raise the buttonhole lever to its original<br />
position.<br />
53<br />
3