Sewing Machine - Brother

More documents

Recommendations

Info

36 SEWING BASICS ——————————————————————————————————————————————————————————————————————————————————————————————————————— 2 SEWING BASICS SEWING Basic sewing operations are described below. Before operating the sewing machine, read the following precautions. ● While the machine is in operation, pay special attention to the needle location. In addition, keep your hands away from all moving parts such as the needle and handwheel, otherwise injuries may occur. ● Do not pull or push the fabric too hard while sewing, otherwise injuries may occur or the needle may break. ● Never use bent needles. Bent needles can easily break, possibly resulting in injuries. ● Make sure that the needle does not strike basting pins, otherwise the needle may break or bend. General sewing procedure Follow the basic procedures below to sew. 1 Turn on the machine. 2 Select the stitch. 3 CAUTION Attach the presser foot. 4 Start sewing. Turn on the sewing machine. For details on turning on the machine, refer to “Power supply” (page 12). ↓ Select the stitch appropriate for the area to be sewn. For details on selecting a stitch, refer to “Selecting a stitch” (page 37). ↓ Attach the presser foot appropriate for the stitch. For details on replacing the presser foot, refer to “Replacing the presser foot” (page 34). ↓ Position the fabric, and then start sewing. When sewing is finished, cut the threads. For details on starting to sew, refer to “Starting to sew” (page 39).
————————————————————————————————————————————————————————————————————————————————————————————————————————————————————— Selecting a stitch Using the stitch selection keys, select the desired stitch. When the sewing machine is turned on, the straight stitch ( left needle position) is selected. Turn on the sewing machine. a b (For models equipped with the character stitch key) Confirm that the utility stitch indicator is lit. If it is not lit, press the utility stitch key. a Utility stitch key b Utility stitch indicator Press (stitch selection keys). The c number of the selected stitch is displayed. Press the “+” or “–” side of to increase or reduce the number by one. Pressing on the right changes the digit on the right and pressing on the left changes the digit on the left. The stitch is selected. Attach the presser foot indicated in the LCD. d e a Presser foot type For details, refer to “Replacing the presser foot” (page 34). Memo ● The presser foot to be used is indicated by the letter (J, A, etc.) that appears above or beside the stitch number. If necessary, adjust the stitch length and width. For details on sewing with each of the utility stitches, refer to the following example. 37 2
Page 1: Operation Manual Sewing Machine Pro
Page 4 and 5: 2 ———————————
Page 6 and 7: 4 ———————————
Page 8 and 9: 6 KNOWING YOUR SEWING MACHINE —
Page 40 and 41: 38 SEWING BASICS ——————
Page 48 and 49: 46 UTILITY STITCHES —————
Page 82 and 83: APPENDIX ————————
Page 84 and 85: 82 APPENDIX ———————
Page 86 and 87: 84 APPENDIX ———————
Page 88 and 89:
86 APPENDIX ———————
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
APPENDIX ————————
Page 104 and 105:
APPENDIX ————————
Page 106 and 107:
i APPENDIX ————————
Page 108:
English 885-V64/V65/V66/V67 XE8589-
show all

Sewing Machine - Brother

Create successful ePaper yourself

Delete template?

Save as template?