Sewing Machine - Brother

More documents

Recommendations

Info

22 KNOWING YOUR SEWING MACHINE ——————————————————————————————————————————————————————————————————————————————————— e While lightly holding down the bobbin with your right hand as shown, guide the thread through the slit (a and b). At this time, check that the bobbin easily rotates counterclockwise. Then, pull the thread toward you to cut it with the cutter (c). a Slit b Cutter (Cut the thread with the cutter.) Note ● If the thread is not correctly inserted through the tension-adjusting spring of the bobbin case, it may cause incorrect thread tension (page 41). 1 a Tension-adjusting spring f Replace the bobbin cover. Put the left tab in place (see arrow a), and then press lightly on the right side (see arrow b) until the cover clicks into place. Memo ● You can begin sewing immediately without drawing up the bobbin thread. If you want to draw up the bobbin thread before you start to sew, follow to the procedure in “Drawing up the lower thread” (page 28).
————————————————————————————————————————————————————————————————————————————————————————————————————————————————————— Upper threading Set the upper thread and thread the needle. For details on the needle threader, see page 26. Turn on the sewing machine. a b CAUTION a Spool pin b Mark on the handwheel ● When threading the upper thread, carefully follow the instructions. If the upper threading is not correct, the thread may become tangled or the needle may bend or break. ● Never use a thread weight of 20 or lower. ● Use the needle and the thread in the correct combination. For details on the correct combination of needles and threads, refer to “Needle types and their uses” (page 29). Raise the presser foot using the presser foot lever. a Presser foot lever CAUTION ● If the presser foot is not raised, the sewing machine cannot be threaded correctly. c Raise the needle by turning the handwheel toward you (counterclockwise) so that the mark on the wheel points up, or press (needle position button) (for models equipped with the needle position button) once or twice to raise the needle. or a Mark b Needle position button If the needle is not correctly raised, the sewing machine can not be threaded. Be sure to turn the handwheel so that the mark on the wheel points up before threading the sewing machine. 23 1
Page 1: Operation Manual Sewing Machine Pro
Page 4 and 5: 2 ———————————
Page 6 and 7: 4 ———————————
Page 8 and 9: 6 KNOWING YOUR SEWING MACHINE —
Page 38 and 39: 36 SEWING BASICS ——————
Page 48 and 49: 46 UTILITY STITCHES —————
Page 74 and 75:
72 UTILITY STITCHES —————
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
APPENDIX ————————
Page 84 and 85:
82 APPENDIX ———————
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
i APPENDIX ————————
Page 108:
English 885-V64/V65/V66/V67 XE8589-
show all

Sewing Machine - Brother

Create successful ePaper yourself

Delete template?

Save as template?