Sewing Machine - Brother
Sewing Machine - Brother
Sewing Machine - Brother
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
98<br />
APPENDIX ————————————————————————————————————————————————————————————————————————————————————————————————————————————<br />
List of symptoms<br />
■ Before sewing<br />
Symptom Possible cause How to put it right Reference<br />
The needle<br />
threader can not<br />
be used. (For<br />
models equipped<br />
with the needle<br />
threader lever.)<br />
You have not moved the needle<br />
holder to its highest position.<br />
Raise the needle either by turning the<br />
handwheel toward you<br />
(counterclockwise) so that the mark<br />
on the wheel points up or by pressing<br />
(needle position button) once or<br />
twice.<br />
page 23<br />
The needle is incorrectly installed. Correctly install the needle. page 30<br />
The sewing light<br />
does not come<br />
The sewing lamp is damaged.<br />
Contact your retailer or the nearest<br />
authorized service center.<br />
–<br />
on.<br />
The machine is not turned on. Turn on the machine. page 12<br />
The thread is not passed through the<br />
bobbin-winding thread guide<br />
correctly.<br />
Correctly pass the thread through the<br />
bobbin-winding thread guide.<br />
page 17<br />
Bobbin thread<br />
does not wind<br />
Bobbin spins slowly. (for models<br />
equipped with the sewing speed<br />
Move the sewing speed controller to<br />
the right (so that the speed will be page 19<br />
neatly on the<br />
bobbin.<br />
controller.)<br />
The thread that was pulled out was<br />
not wound onto the bobbin correctly.<br />
(For models equipped with the fast<br />
bobbin winding system.)<br />
fast).<br />
Wind the thread that was pulled off<br />
round the bobbin five or six times<br />
clockwise.<br />
page 18<br />
Raise the needle either by turning the<br />
The thread does<br />
not pass through<br />
the eye of the<br />
needle. (For<br />
You have not moved the needle<br />
holder to its highest position.<br />
handwheel toward you<br />
(counterclockwise) so that the mark<br />
on the wheel points up or by pressing<br />
page 23<br />
models equipped<br />
with the needle<br />
threader lever.)<br />
The needle<br />
threader lever<br />
The needle is incorrectly installed.<br />
(needle position button) once or<br />
twice.<br />
Correctly install the needle. page 30<br />
does not lower to<br />
the correct<br />
position. (For<br />
models equipped<br />
with the needle<br />
threader lever.)<br />
While winding<br />
The needle has not been raised to the<br />
correct position.<br />
Press the needle position button. page 23<br />
the bobbin, the<br />
bobbin thread<br />
was wound<br />
below the bobbin<br />
winder seat.<br />
You have not wound the bobbin<br />
thread properly.<br />
After removing the thread wound<br />
below the bobbin winder seat, wind<br />
the bobbin correctly.<br />
page 15