PRIVATE TREATY SALE - James G. Murphy Co.

PRIVATE TREATY SALE
DALLAS MILL PROPERTIES, LLC
(Former Weyerhaeuser Mill)
1551 SE Lyle St, Dallas, Oregon
James G. Murphy Co.
Commercial & Industrial Auctioneers

Debarker
1985 NICHOLSON A1 35”/50” tandem 6-arm right hand ring debarker, 35” ring only
w/spare ring & tools arms, 4” minimum diameter, 8’ minimum length, 145 rpm,
82-184 fpm, approx 125 hp ring drive, 60 hp & 50 hp motors to FALK reducer feed
drive, HPS 25 hp dual pump, 100 gallon, 1300 psi hydraulic unit, cab, controls &
electrics, in & outfeed log hauls, s/n: 290-5441
Whole Log Quadrant Feeder
LINDEN LQF 00-270, 50’ whole log quadrant feeder, log in stop-n-loader, Hypower
190 hp quad pump, 400 gallon, hydraulic unit, s/n: LQF-00-270
Whole Log Cut Off Saws – Scanning
84” Insert tooth whole log cut off saw w/approx 100 hp motor, log clamps & hold
downs, approx 70’ 8”x14” box chain infeed log haul, approx 30’ outfeed hourglass
rollcase, 50 hp dual pump hydraulic unit, (3) spare saws
2004 NELSON BROS. NBE true profile shape bucking scanner/optimizer, single zone
profile scanning on (2) sides of log, (2) JS-20-01 true shape solid state cameras/
laser scan heads, spare scanner head, s/n: 329
Approx 6’ bar type whole log cut off saw w/clamp, hourglass rolls, approx 20 hp motor
Carriage Drive – Scanning – Carriage
2000 IES 450 hp DC carriage drive w/GE 450 hp/1000 rpm/500 volt DC motor model
5CD226TA800B801 to Falk 465A2 model 2000-00670084-01 reducer, FALK
1110T10 coupling, 36” diameter x 30” wide carriage drum for (2) 1” cables,
hydraulic take ups, EUROTHERM 590H series DC digital link converter, MGM 550
kva, 480-460Y/266 volt isolation transformer, spare cable, s/n: 2000-07-82601
2010 USNR/PERCEPTRON laser carriage scanning system, 27’ 6” zone, supported
by mill expert carriage & MILL WIDE WEB product suite software, CONCEPT
SYSTEMS controls, s/n: 4389
FILER & STOWELL C400 LH 17° canted left hand 48”x24’ Temposonic positioned
4-knee carriage, tong dogs, cant kicker, BROWNSVILLE turner, (4) sets of trucks,
pantograph, 144’ 90 lb rail, hydraulic unit
Head Rig – Slabber – Log Turner
LETSON & BURPEE HAS-1, 17° canted left hand 8’ air strain head rig bandmill
w/TATUNG 300 hp/875 rpm motor, ALLEN BRADLEY BULLETIN 150 SMC
150A500NED controller, controls & electrics
CM&E 34 left hand Temposonic positioned slabber w/key knife conversion, approx
250 hp motor, s/n: S-422
CORINTH/ELLISON approx 42” hydraulic operated log turner, controls & electrics
Resaw (Installed in 2005)
KOCKUMS 6’ full air strain offset twin horizontal band resaw, upper & lower setworks,
(2) TOSHIBA 200 hp/1200 rpm motors w/(2) ALLEN BRADLEY SMC DIALOG
PLUS 300 hp controllers, ALLEN BRADLEY 5 PLC, chromed knurled feed
thru rolls, in & outfeed rollcases, controls & electrics, infeed & outfeed support
equipment w/SKK drives available, s/n: 4335
Edgers – Optimizers
1996 MCGEHEE 12” curve sawing gang, 12”x26” max cant size, 4”x4” min cant size,
8’-24’ cant length, max sweep 6” in 20’, 150 fpm, 3-saw zones, (2) 6” #3 RETEK
splined arbors, (2) TOSHIBA 400 hp & (4) TOSHIBA 300 hp drives, (2) linear
positioned chipping heads w/key knives, PTOH-E-03 Temposonic positioned
sharp chain infeed module, s/n: 96-127-N, outfeed rollcase, NEWNES 125 hp
triple pump hydraulic unit, saw guide & maxi-lube system, spare guides, saws,
splined & jack shaft arbors, cylinders, (2) ALLEN BRADLEY SMC Dialog Plus 400
hp & (4) 300 hp controllers, ALLEN BRADLEY 1336S 75 hp variable frequency
drive, ALLEN BRADLEY 6-section MCC w/(19) switches, s/n: 96-127, infeed &
outfeed support equipment w/SKK drive available
NEWNES CANTOPT24B 24’ left hand curve sawing gang optimizer, supported by
COE/NEWNES/MCGEHEE transverse edger 6.2 software, lumber sizes: 8’-24’
lengths, 4”-12” widths, 2”-3” thicknesses, cant sizes: 8’-24’ lengths, 4”-28” widths,
4”-12” thicknesses, scanner feed transfers w/SKK drives available, s/n: 96-127-EO
2001 TMT 4”x42” optimized TAE 4-saw shifting board edger w/top reman head, key
knife conversion, min cant size: 1”x4”x8’, max cant size 4”x30”x24’, #3 RETEK
splined arbor w/TOSHIBA 300 hp arbor drive motor, 22” 8-knife top reman head,
key knife conversion w/TOSHIBA 200 hp arbor drive motor, 24’ Temposonic
positioned sharp chain infeed table, outfeed belt w/edge picker section, s/n:
5283, NEWNES 65 hp triple pump hydraulic unit, saw guide & lube system, (2)
ALLEN BRADLEY SMC PLUS 300 hp controllers, ALLEN BRADLEY 1336F 50 hp
variable frequency drive, ALLEN BRADLEY 6-section MCC w/(14) switches, spare
guides, saws, parts, s/n: 5079, infeed & outfeed support equipment w/SKK drives
available
2001 PERCEPTRON 24’ left hand flitch scanning optimizer w/(24) sensors (updated
by PERCEPTRON in 2007)
1998 USNR/SCHURMAN 6STA36 2-saw shifting board edger w/top reman & chipping
heads, #3 RETEK splined arbor w/SIEMENS 200 hp/1185 rpm drive motor, 12”
top reman head, key knife conversion w/approx 100 hp arbor drive motor, (2)
USNR/CM&E 34 chipping heads, key knife conversion, TOSHIBA 200 hp drives,
24’ 600BD Temposonic positioned infeed table, outfeed belt, 35 hp dual pump
hydraulic unit, SCHURMAN saw guide & lube system, spare guides & saws, CH
7-section MCC w/(38) switches, infeed & outfeed support equipment w/SKK drives
available, s/n: 3234
1998 NEWNES 86ALGS-124B, 24’ left hand edger optimizer, supported by COE/
NEWNES/MCGEHEE transverse edger optimizer 6.3 software, s/n: 93-119
For more information go to www.murphyauction.com
Phone 503-463-4444
Trimmers – Optimizers
1995 NEWNES 24’ right hand line shaft trimmer w/60 hp motor, 1”-4” thickness, 3”-16”
width, 6’-24’ length, (13) air lift saws w/zero saw, 3-stage Temposonic positioned
fence, 12’ 12-strand lugged feed thru transfer, hydraulic unit, infeed & outfeed
support equipment w/SKK drives available (sawmill), s/n: 95-032
1995 NEWNES 86ALGS-124BP, 24’ right hand optimizer frame (no cameras or lasers),
swing arm controls (sawmill), s/n: 95-032R3
1990 IRVINGTON MOORE 66209LH individually motorized 24’ left hand trimmer, (13)
24” air lift saws w/adjustable & zero saws, 2-stage Temposonic positioned fence,
hydraulic unit, 10’ 6-strand & 20’ 12-strand lugged feed thru transfer w/72” even end
rolls, infeed & outfeed support equipment w/SKK drives available (planer mill), s/n:
21129LH
2002 COE/NEWNES/MCGEHEE DETEC BIO SCAN 4X, 24’ left hand trimmer optimizer
w/(12) of (16) COE DTEC lasers & (18) of (24) COE DALSA cameras, (8) feed thru
belts (planer mill), Job# CT00015B
Sorters
NEWNES 24’ left hand 40-bin J-bar sorter system, 1”-4” thickness, 4”-12” width, 8’-24’
length, BALDOR 60 hp motor to 2008 SM CYCLO 21:1 reducer, ALLEN BRADLEY
1336E 75 hp variable frequency drive w/brake, ALLEN BRADLEY PLC 5-30, ALLEN
BRADLEY 2-section MCC w/(10) switches, PHL INDUSTRIES 25 hp hydraulic unit,
8’ 12-strand lugged, 31’ 12-strand lugged w/18’ even end rollcase, 3’ 7-strand, 45°
engineered corner, 14’ 8-strand lugged infeed transfer, (3) 40’ 6-strand 81X take
away transfers, 30’ 6-strand 81X outfeed transfer, SKK drives, 18’H x 43’W x 192’L
all steel building w/sprinklers & lights (sawmill)
IRVINGTON MOORE 24’ right hand 29-bin push lug sorter system, 1”-4” thickness,
4”-12” width, 8’-24’ length, TOSHIBA 100 hp motor to DODGE TXM 149 rpm
reducer w/ALLEN BRADLEY 1336F-B150-AN-EN-L6 variable frequency drive w/
brake, WESTINGHOUSE PC1250 PLC, CUTLER HAMMER 8-section MCC w/
(32) switches, PHL INDUSTRIES 25 hp hydraulic unit, 20’ 11-strand lugged infeed
transfer w/15’ even end rollcase, 4’ 8-strand transition transfer, 48’ 6-strand 81X take
away transfer, 68’ 6-strand 81X outfeed transfer w/14’ wide rollcase, 60’ 6-strand
81X decline outfeed w/6-arm tipple, SKK drives (planer mill)
Stackers
NEWNES 24’ right hand hydraulic over end lumber stacker w/6-arm x 67” lumber
lowering hoist, (3) sticker magazines, (9) lumber placing arms, 17’ & 12’ 7-strand
infeed transfers w/even end chain & rolls, 28’ 6-strand outfeed transfer, (2) PHL
INDUSTRIES 10’ strand unscramblers, 100 hp double pump & (2) 30 hp single
pump hydraulic units, ALLEN BRADLEY 5-section MCC w/(25) switches, ALLEN
BRADLEY SLC 500 PLC w/SLC 5/04 CPU, SST PROFIBUS scan, (7) infeed & (4)
outfeed modules (sawmill)
COE/NEWNES/MCGEHEE 24’ right hand hydraulic over end lumber stacker w/6-arm to
60” lumber lowering hoist, (3) dual hydraulic sticker & lathe magazines, (1) sticker
magazine, approx 5/8”x5/8”x45”-47” stickers, approx 1/2”x1-1/2”x45”-47” lathe, s/n:
07-0072-EBA01 on magazines, (6) lumber placing arms w/hooks, 8’ & 4’x7-strand
infeed transfers, 15’ 6-strand infeed transfer w/even end rolls, 14’ 5-strand outfeed
transfer w/jump rollcase, PHL INDUSTRIES 20 hp & 40 hp hydraulic units (planer
mill)
NEWNES 16’ customized right hand hydraulic over end lumber stacker w/5-arm
x 60” lowering hoist, (4) dual hydraulic sticker & lathe magazines, approx
5/8”x5/8”x45”-47” stickers, approx 1/2”x1-1/2”x45”-47” lathe, (5) lumber placing
arms w/hooks, 18’ 9-strand H78 poly infeed transfer w/even end chain, 6’x10-strand
unscramble w/board kickers, 32’ 6-strand 81X outfeed transfer w/jump rollcase,
50 hp dual pump, 40 hp & 20 hp single pump hydraulic units, ALLEN BRADLEY
6-section MCC w/(29) switches, ALLEN BRADLEY 5/30 PLC w/remote (planer mill)
Banding Stations – Package Saw
ACME plastic banding station w/poly head & band feeder, batten feeder w/infeed
transfer & magazine, top & bottom squeeze, hydraulic end press & gate, (2) 20’
6-strand 81X infeed transfers w/rollcase, infeed rollcase, outfeed transfer w/jump
rollcase, 20 hp single pump hydraulic unit, SKK drives
SIGNODE plastic banding station (no poly head), SAMUELSON band feeder, batten
feeder, top & bottom squeeze, hydraulic end press & gate, infeed transfers w/
rollcase, infeed rollcase, outfeed transfer w/rollcase, 25 hp dual pump hydraulic
unit, ALLEN BRADLEY 1336F BRF100-AN-EN-L6 & (2) ALLEN BRADLEY 1336
Plus variable frequency drives, ALLEN BRADLEY SLC 500 w/SLC 5/04 CPU, (2)
scanners, (5) infeed & (2) outfeed modules, ALLEN BRADLEY 6-section MCC w/
(20) switches, SKK drives
PACIFIC TRAIL MFG 7’ package saw, BALDOR 20 hp drive motor w/ALLEN BRADLEY
1336 Plus variable frequency drive, 52” max width, 40’ 3-strand 81X infeed &
outfeed transfers w/jump rolls, additional rollcases, SKK drives
Planer – Pineapple Feed Table – Live Bridge – Outfeed & Slowdown Belts – Blower
WOODS 409M1 planer/matcher, 6-heads, 6”x15”, 16-knives, 150 hp top, 75 hp bottom,
70 hp & 50 hp sides, 40 hp top & bottom profile heads, (6) hydraulic driven feed
rolls, PFS 255 hp quad pump hydraulic unit, ABB ACS 500 variable frequency drive
on profiles, (12) spare heads, (2) profile stands, (4) spare pineapple rolls, s/n: 33661
18’ hydraulic dual pineapple feed table w/(5) 12”x29” smooth & (2) 12”x29” knurled
canted rolls, 6’ 6-strand H78 infeed transfer, ALLEN BRADLEY 1336 variable
frequency drive, 25 hp single pump hydraulic unit
35’ 3-section hydraulic live bridge w/speed-up roll, (19) 12”x20” smooth rolls, hold downs
22”x31’ planer outfeed belt w/SKK drive
22”x14’ planer outfeed belt w/SKK drive, ALLEN BRADLEY 1336F 25 hp variable
frequency drive
(2) WEST COAST INDUSTRIAL 60”x15’ slow down belts w/SKK drive, ALLEN
BRADLEY 1336 10 hp variable frequency drives

Approx 72” planer blower w/GE 200 hp/875 rpm motor, ALLEN BRADLEY SMC DIALOG
PLUS 300 hp controller
Tilt Hoists – Board Feeder – Grading Stations
24’ 5-arm x 60” hydraulic tilt hoist w/25 hp single pump hydraulic unit, 33’ 5-strand 81X
infeed transfer w/SKK drive
18’ 4-arm x 60” mechanical tilt hoist, motor w/brake to reducer drive, 10’ 4-strand H84
infeed transfer w/SKK drive
USNR 2970 ACCU-LOAD hi-speed quad cam board feeder, 8’ strand 81X feed thru
transfer w/(2) ALLEN BRADLEY 1335 PLUS II variable speed drives, (2) ALLEN
BRADLEY 1394 DIGITAL SERVO controllers w/(1) 10 kw, (1) 5 kw & (4) 2 kw
modules, s/n: 4092-2970
LUCIDYNE COLOR SCAN grade reader, (3) grader operator chairs, 30’ 6-strand lugged
grader transfer w/belts, ALLEN BRADLEY 1336F 30 hp variable frequency drive,
USNR 6’ 10-strand unscramble, 10’ 8-strand H78 lumber landing table, even end
rollcase, 10’ 7-strand incline transfer, SKK drives
Hogs – Chippers – Vibratory Conveyors
JEFFREY 58WBSS hammer hog w/TOSHIBA 400 hp/1180 rpm/460 volt high efficiency
motor w/ALLEN BRADLEY SMC DIALOG PLUS 500 hp controller, (6) rows of (15)
hammers, spare hammers, screens, s/n: 11671
WSM 2420BR hammer hog w/TOSHIBA 100 hp motor, 21-1/2” top opening, 42-1/2”
bottom opening (sawmill), s/n: 4851000
WSM 2420BR hammer hog w/40 hp motor, 21-1/4” top opening, 42-1/2” bottom opening
(planer mill), s/n: 4881-200
ACROWOOD 8424 8-knife slant disc right hand chipper w/(2) TOSHIBA 300 hp motors,
horizontal feed, back discharge, key knife conversion, (2) ALLEN BRADLEY
B300NBD controllers, ALLEN BRADLEY SLC 500 PLC w/5/04 CPU, scanner, (7)
infeed, (4) outfeed modules (sawmill), s/n: 5523-00
ACROWOOD 6120 6-knife slant disc right hand chipper w/TOSHIBA 300 hp motor,
horizontal feed, back discharge, key knife conversion, CH size 5 starter (sawmill), s/n:
5523-00
BLACK CLAWSON 66-8K 8-knife chipper w/GE 300 hp/1175 rpm motor, side infeed,
bottom outfeed, spare 66” disc (planer mill), s/n: 4094
MILLPOWER 24”x34’ balanced vibratory conveyor w/5’ fiberglass tub, 1” stroke, 405 rpm
(planer mill)
MILLPOWER 24”x24’ balanced vibratory conveyor, 1” stroke, 430 rpm (planer mill)
MILLPOWER 24”x20’ balanced vibratory conveyor, 1” stroke, 430 rpm (planer mill)
ACTION 18”x164’ vibratory conveyor w/5’ fiberglass tub, 18’ fines drop out, 7/8” stroke,
445 rpm, RENS L240 (sawmill), s/n: 1633-1
ACTION 36”x108’ covered vibratory conveyor, 7/8” stroke, 426 rpm (sawmill), s/n: 1632-1
ACTION 24”x42’ vibratory conveyor, 5’ fiberglass tub, 10’ fines drop out, 7/8” stroke, no
metal detector (sawmill)
Chip Bins – Baghouses – Chip Screens – Trailer Loader
Approx 90-unit hydraulic mono chip bin (sawmill)
Approx 60-unit hydraulic mono chip bin (sawmill)
Approx 96-unit hydraulic mono shavings bins w/cyclones (planer mill)
Approx 24-unit hydraulic shavings bins (planer mill)
(2) Approx 30-unit hydraulic hog fuel bins (sawmill)
10’ diameter baghouse w/air lock, TWIN CITY size 402 w/SIEMENS 200 hp motor,
ALLEN BRADLEY SMC DIALOG PLUS 150 hp controller, SUTORBILT baghouse
blower, air receiver, approx 50’ screw auger
(3) CARTER DAY 9’x9’ baghouses w/air locks, 150 hp/125 hp & 100 hp blowers, (4)
approx 12’ cyclones, approx 30’ belt (plywood mill)
MAC 8’ diameter baghouse w/AMERICAN 60 hp blower, SUTORBILT bag sweeper
blower
BM&M 8’x14’ 3-deck counter flow chip screen, twin fines 1/4” overs screen, 1-1/2”, 10 hp
motor (sawmill), s/n: 15218
BM&M 7’x16’ 2-deck w/ball deck below #6 mesh top screen, (2) flow dividers, 7.5 hp
motor (sawmill), s/n: 15839
WSM HD80D 8’x10’ 3-deck chip screen, s/n: 131586
Approx 10 ton trailer hoist, cable winch w/15 hp motor to WESTERN D52 reducer
Compressors – Dryers – Blowers – Feeder
QNW 1500 rotary screw compressor, 300 hp (sawmill), s/n: 790147
SULLAIR 32-300L rotary screw compressor, 300 hp (sawmill), s/n: 7249NLD
QNW 740A rotary screw compressor, 150 hp (planer mill), s/n: 780207
QNW 380E rotary screw compressor, 100 hp (sawmill), s/n: 750742
ZEKS heat sink refrigerated dryer (sawmill)
SULLAIR SAR630 twin tower desiccant dryer (planer mill), s/n: 003-D13602
Numerous air receivers
SUTORBILT 4001 series, 10”x18” high pressure blower w/50 hp motor (planer mill)
PRECISION 25”x25” chip feeder w/motor to shaft mounted reducer (sawmill)
RADER 20”x20” chip feeder w/motor to shaft mounted reducer (planer mill)
Filing Room (sawmill)
(2) ARMSTRONG #4 right hand bandsaw sharpener w/digi cam, shape-up arm, No. 58
filing clamp, air strand, s/n: 15116 & 12687
ARMSTRONG #6 left hand bandsaw sharpener w/shape-up arm, s/n: 14881
ARMSTRONG SIDE PRO side grinder, s/n: 20205
ARMSTRONG bandsaw leveler, s/n: 20210
ARMSTRONG AUTO TIP 85 bandsaw tipper, s/n: 16907
ARMSTRONG 85AT bandsaw tipper, s/n: 17957
ARMSTRONG 3-10 circle saw stretcher roll, s/n: 17655
ARMSTRONG #5 bandsaw stretcher roll
SCHURMAN dual head resurfacer
BERO-TECH KNS02 knife grinder, s/n: 20416
ACME circle saw sharpener
(2) BARNHARDT wheel grinders, anvils, saws
Electrics
(2) GE 1500 kva transformers, 2400-480Y/277 volt w/switchgear, s/n: L249446 &
E-6871000
CH 2000 amp main w/(2) 800 amp & (1) 400 amp breakers
(20±) ALLEN BRADLEY, SQUARE D & CUTLER HAMMER MCC’s
(19) ALLEN BRADLEY SMC DIALOG PLUS controllers to 500 hp
(4) ALLEN BRADLEY SMC PLUS controllers to 150 hp
(17) ALLEN BRADLEY 1336 variable frequency drives to 75 hp
(10) ALLEN BRADLEY PLC’s
Motors to 400 hp
(100±) SKK drives
Numerous transformers to 1500 kva, disconnects to 400 hp, ALLEN BRADLEY, CH
& SQUARE D spares
Mill Spares & Supplies
(40±) spare SKK gearheads & reducers to 20 hp; (50±) spare motors to 300 hp;
(50±) stators to 150 hp, (50±) spare hydraulic motors & pumps; (200±) spare
new & rebuilt cylinders; (30±) Temposonic wands; (50±) SERVO & assorted
valves; new alligator chain; box chain; log deck; 81X & mill duty; large quantity
of new bearings; sprockets; belting; drive belts; hose; wire; idlers; pulleys;
bushings; couplers; air bags; lubricators; intercoms
Log Decks – Hauls – Belts
(2) 31’ 8-strand H132 tree length log decks, S-drive, SKK drive (B.D.)
(2) 19’ 8-strand H132 tree length log decks, S-drive, SKK drive w/(2) 24’ 9-arm
LS&L (B.D)
(2) 27’ 4-strand H124 tree length log decks, S-drive, SKK drive (Q.D.)
20’ 8-strand H124 tree length log deck, S-drive w/40’ 9-arm LS&L (B.D)
12’ 8-strand H124 tree length log deck, S-drive (B.D.)
26’ 5-strand H124 log deck, S-drive, SKK drive w/26’ 4-arm LS&L (sawmill)
20’ 5-strand H132 jack ladder transfer, SKK drive (sawmill)
Approx 42”x160’ covered troughing roll belt conveyor, SKK drive
Approx 42”x140’ covered troughing roll belt conveyor, SKK drive
Approx 48”x70’ covered troughing roll belt conveyor, SKK drive
Approx (50) lumber transfers to 70’ w/SKK drives
Approx (40) conveyors to 160’ w/SKK drives
Approx (10) rollcases to 40’ w/SKK drives
TERMS & CONDITIONS
Equipment is being sold by Private Treaty. To view the equipment
you must make an appointment. Equipment offers must
be submitted using a Bidder’s Packet. Appointments and
packets are available through the James G. Murphy Company
by calling 503-463-4444, or emailing tifni@murphyauction.
com. All visitors are required to check-in and check-out at the
security gate, and must wear hard hats, safety vests and hardtoed
shoes.
Bid offers will be accepted starting December 10, 2012
through December 20, 2012. Winning bids will be
announced starting January 2, 2012.
For further information please contact Andy Taylor at 503-705-
8579, or Bob Jones at 503-730-1564.
A Buyer’s Premium of 10% will be charged on all sales.
WARRANTY DISCLAIMER: ALL SALES ARE FINAL. All items
are being sold “As Is, Where Is”, with all faults and without
any warranties as to merchantability of fitness for a particular
purpose. The principal, the auctioneer, the advertising
coordinator, and any of their agents make no express or
implied warranties of any type. All sales are subject to Owner’s
approval. If reasonable offers are not received, Owner reserves
the right to sell the items at a later date.
Due to safety & insurance reasons, persons under 12 not admitted
More photos are available online at www.murphyauction.com

James G. Murphy Co.
Commercial & Industrial Auctioneers
PRIVATE TREATY SALE
DALLAS MILL PROPERTIES, LLC
(Former Weyerhaeuser Mill)
1551 SE Lyle St, Dallas, Oregon
James G. Murphy Co.
Commercial & Industrial Auctioneers
P.O. Box 82160, Kenmore, WA 98028
PRESORTED
FIRST CLASS MAIL
U.S. POSTAGE
PAID
SEATTLE, WA
PERMIT NO. 963