Download pdf Brochure - James G. Murphy Co.

NO MINIMUMS* / NO RESERVES* 

James G. Murphy Inc. 

Commercial & Industrial Auctioneers 

PUBLIC AUCTION 

April 18, 2012 

Closing Mill 

Saw Mill, Planer Mill, Veneer Mill, Rolling Stock 

7616 Hwy 10W • Pine Hill, AL 36769 

Wednesday 

PINE HILL LUMBER 

& VENEER MILL 

Bid live or bid online with MurphyLIVE! 

Auction Starts at 9am 

Preview 8am - 4pm, Tues, April 17 

or by Appointment 

For more information go to www.murphyauction.com • Phone 425.486.1246

NO MINIMUMS* - NO RESERVES* 

SAWMILL 

Step Feeders 

LINDEN 60’ tree length quadrant feeder w/375 hp, 1000 gallon hydraulic unit 

LINDEN 22’ 4-stage mechanical step feeder w/motor to SM CYCLO reducer 

Bucking Optimizer System 

1999 PERCEPTRON model Tricam digital countour sensor bucking optimizer system w/(4) laser 

scanner heads, (1) 2006 scan head, 6’-24’ log length, scanner frame, USNR optimization 

computers, (2) ALLEN BRADLEY SLC 500 PLC’s w/(10) & (6) cards, s/n: 77931 

Cut Off Saws 

(2) 1999 NICHOLSON SS30 GME Supersaw high speed precision automated cut off saw systems, 28” 

max. x 3” min. log dia. x 8’ min. log length, 72” insert tooth saws, 100 hp motors, 130 hp hydraulic 

units, feed roll control systems, 30”x72’ main log infeed belt, 30”x80’ infeed log belts, 30”x12” 

outfeed log belts (no log stops), (1) 30”x50’ outfeed log belt, 8’x16’ operators booth, motors to 

square box FALK drives, spare saws 

Approx. 72” swing type whole log cut off saw w/approx 100 hp motor, 8’x10’ control booth 

Whole Log Metal Detector 

MDI 38”x46” whole log metal detector w/30”x48” pass thru belt, 2-arm log kicker, motor to square box 

FALK drive 

Edger-Optimizer 

1998 CAE/NEWNES 3-saw top arbor right hand robo edger, 4”x22” max., 1100 fpm, GE 250 hp/8570 

rpm motor, 100 hp hydraulic unit, saw guide lube system, 6” splined arbor, alligator infeed chains, 

30”x66” infeed belt, 20’ sequencing rollcase, 30”x21’ outfeed belt w/Temposonic positioned edge 

picker, 30”x21’ outfeed rollcase, motor to FALK square box drives, job# 7146 

1998 CAE/NEWNES OPT-LEH-00 lineal cant optimizer, camera/laser unit LP-1-100-A, swing arm 

controls, s/n: 98-458-D0, camera/laser, s/n: 08090008 

1998 CAE/NEWNES LCH-00 lineal cant optimizer, camera/laser unit LP-1-100-A, swing arm controls, 

s/n: 98-458-D0, camera s/n: 08040231 

Trimmer-Optimizer 

1998 CAE/NEWNES 20’ cut, 24’ pass right hand line shaft driven trimmer, approx. 75 hp, air lift saws, 

2-stage optimized positioning fence, 12’ 10-strand lugged 81X feed thru transfer, 12’ 7-strand 

lugged 81X infeed transfer w/10’ even end rollcase, (36) board hooks, approx. 24”x24’ clean out 

belt, 100 hp hydraulic unit 

1998 CAE/NEWNES OPT-TTL20-01, 20’ right hand trimmer optimizer, 16’ 10-strand lugged 81x feed 

thru transfer, 20’ 6-strand lug loader 

Stacker 

1998 CAE/NEWNES left hand hydraulic over end 20’ lumber stacker w/6-arm lumber lowering hoist, 9’ 

arms, 20’ 7-strand 81X loading table, (6) lumber placing arms, 6’ 7-strand 81X infeed transfer, 40” 

even end rollcase, 16’ 8-strand unscramble, 16”x24’ clean out belt, approx. 50 hp hydraulic unit 

(auto stick placer removed) 

Kilns-Cooling Sheds-Carts 

1998 IRVINGTON MOORE 36’x120’ aluminum zone controlled double track steam fired dry kiln, 72” 

20 hp aluminum kiln fans, 4” vertical kiln tube, refrigerated electric dryer, 4’x20’ condensate tank 

w/(2) 20 hp pumps, 15’x75’ kiln control house, (2) ALLEN BRADLEY 1336S-B300 AC drives, 

ALLEN BRADLEY 9-section MCC w/(30) switches 

(2) IRVINGTON MOORE 18’x120’ aluminum zone controlled double track steam fired dry kilns, 72” 

20 hp aluminum kiln fans, 4”horizontal kiln tube, (2) ALLEN BRADLEY CENTERLINE 5-section 

MCC’s w/(18) switches 

Approx. 15’H x 75’W x 150’L all steel cooling shed 

Approx. 15’H x 50’W x 150’L all steel cooling shed 

Approx. 25’H x 60’W x 110’L all steel clear span cooling shed 

Approx. (150) 48”x96” kiln carts w/6’ center to center on wheels 

Approx. (110) 96”x96” kiln carts w/6’ center to center on wheels 

Whole Log Chipper-Hogs-Magnets 

CARTHAGE 104” left hand whole log chipper w/(15) knives, drop infeed, bottom outfeed, s/n: 

MRC1718-91, EM 1750 hp/327 rpm/2300 volt motor, s/n: 166156011, 30”x90’ infeed belt, 54” 

2-strand 6”x12” box chain outfeed conveyor, GE Limit Amp CR194A127CA 1750 hp/2300 volt 

starter w/GE SOM & PQM monitors 

JEFFREY 54WB hammer hog w/GE 300 hp/1190 rpm motor, s/n: 1002063A (spare motor installed) 

ARASMITH 40” rotary drum hog w/250 hp/1191 rpm motor 

ERIEZ 560, 42” magnet, s/n: 29098-C2 

5”x32”x66” magnet 

Auctioneers Note: 

All items will be sold by 

photo in the veneer 

mill. Please be sure 

to preview equipment 

before the start of the 

auction

AUCTION STARTS AT 9AM CDT 

Compressors-Air Receivers 

SULLAIR LS-25 rotary screw compressor, 150 hp, air cooled, s/n: 003-103029 

SULLAIR LS20S rotary screw compressor, approx. 100 hp, air cooled 

Approx. 5’x10’ air receiver 

(2) Approx. 3’x6’ air receivers 

Filing Room 

WRIGHT W-150 HD-B circle saw facer 

IMW 240 guide milling machine 

Electrical 

GE 8000 line 7-section mill main disconnect, 800 amp, 480 volts w/(29) switches 

GE 8000 line 9-section MCC w/(3) ALLEN BRADLEY 150 hp & (3) ALLEN BRADLEY 50 hp 

drives, ALLEN BRADLEY braking choppers 

GE 8000 line 11-section MCC w/(3) ALLEN BRADLEY 100 hp, (3) ALLEN BRADLEY 40 hp & (3) 

ALLEN BRADLEY 25 hp drives, ALLEN BRADLEY braking choppers 

GE 8000 line 4-section MCC w/(2) ALLEN BRADLEY 100 hp & (1) ALLEN BRADLEY 50 hp 

drives, ALLEN BRADLEY braking choppers 

GE 8000 line 11-section double sided MCC w/(76) switches 


(2) GE 8000 line 6-section double sided MCC w/(47) switches 


GE 8000 line 7-section MCC w/(37) switches 

ALLEN BRADLEY cabinet w/(4) ALLEN BRADLEY SLC 500 PLC’s 

ALLEN BRADLEY cabinet w/(2) ALLEN BRADLEY SLC 500 PLC’s 

Log Centering Chain-Decks-Belts-Rollcase 

108’ log centering chain conveyor w/42” log flites every 32” w/motor to FALK square box reducer 

30’ 4-strand H132 infeed log decks to quadrant feeder, S-drive w/motor to FALK square box 

reducer (also partial 2nd deck) 

24”x70” log infeed belt w/motor to FALK square box 

32”x43’ log infeed belt w/motor to FALK square box 

90° log corner w/(2) 57” log rolls to 54”x9’ belt to (11) 57” log rolls to 54”x11’ belt w/(1) 54” roll to 

(2) 57” log rolls w/drives 

Vibratory Conveyors-Transfers-Conveyors-Rollcases 

VIBRA PRO 24”x100’ balanced vibratory conveyor 


(4) VIBRA PRO 24”x75’ balanced vibratory conveyors 









VIBRA PRO 24”-48”x75’ balanced vibratory conveyor 


(20±) Transfers, conveyors & rollcases to 30’ 

Crane 

DESHAZO 5 ton under slung bridge crane, 60’ span, power travel, pendant controls 

Building 

CECO 45’H x 70’W x 175’L all steel clear span log processing building w/22’H x 25’W x 75’L 2nd 

story electrics room, 22’H x 25’W x 75’L 1st story electrics room 

PLANER MILL 

Planer-Feed Table-Live Bridge-Outfeed Conveyors 

1998 COASTAL Series 3000 613-8SLH planer, 4-heads, (24) knives, 1300-3000 fpm, 200 hp top 

& bottom, approx. 50 hp side heads, (6) hydraulic powered, tensioning & position feed rolls, 

HYDRO-LOC removable top & bottom heads (no top or bottom heads), water cooled guide 

bar w/system, top chip head breaker, fast access side heads, in place jointers, s/n: A2-613-8- 

117-98, PFS 300 hp/300 gallon hydraulic unit w/(3) SUNSTRAND 180CC pumps, operators 

interface panel, controls, spider, approx. 35,000 lbs 

COASTAL 28’ hydraulic dual pineapple feed table w/(3) 14”x14” speed up rolls, (9) 14”x30” spiral 

rolls, (2) 8’x6’x81X infeed transfers, (1) w/board hooks, motors to FALK square box reducers, 

MDI metal detector trough, WAGNER 683 moisture meter, s/n: 277 

28’ Hydraulic live bridge w/(11) 14”x14” rolls, hold over fence 

18”x20’ planer outfeed belt w/motor to square box reducer 



Bid live or bid online with MurphyLIVE!

Trimmer 

2006 CARBOTECH right hand high speed multi saw individually motorized trimmer, cuts 20’, pass 

24’, (22) 16” air lift saws, hydraulic operated hoods, 4-positioning optimized fence, 22’ 11-strand 

81X lugged feed thru transfer w/10’ even end rollcase, smart gate, clean out belt, PLC, auto log 

console, s/n: 06-027-175 

Stacker 

HI-TECH 20’ hydraulic continuous stacker w/6-arm x 52” & 5-arm x 52” lowering hoist, 26’ 6-strand 

81X infeed transfer w/(6) lumber placing arms, 38” even end rollcase, 60 even end chain, 26’ 

6-strand 81X outfeed transfer, partial rollcase, 225 hp hydraulic unit 

HI-TECH 8’x22’ hydraulic continuous package tilt hoist w/6-arms x 102”, 22’ 4-strand & 22’ 5-strand 

H78 infeed transfers, 6’-10’ strand 81X lugged decline outfeed transfer, 150 hp hydraulic unit 

Lumber Gauge 

CAE/NEWNES partial X-ray lumber gauge w/powered bed & press rolls w/encoder, edge guide 

system w/linear actuators, top & bottom shutter assemblies 

Dust Collection System 

AIRCON RA432-12 dust collector w/(432) 12’ bags, 25 hp reverse air blower, 46800 cfa/m air to 

cloth, 7804 sq. ft. cloth, CLARKES ER20X20-IT12 feeder, s/n: 98180 

14’ dia. long neck cyclone w/CLARKES ER35X45-IT12 feeder, s/n: 981079 

NYB size 547RTS low pressure blower w/GE Energy Efficient 300 hp motor, s/n: 9225-100 

SUTORBILT/GARDNER DENVER FGKGEAA size 1230-8000, 12”x30” high pressure blower w/125 

hp motor, STODDARD L61H silencer, 4’x12’ air receiver 

CLARKES spark detection & suppression system w/(5) zones 

High speed arbor gate 

12”-48” dia. piping 

Vibratory Conveyor 

ACTION 30”x20’ 2-tier balanced vibratory conveyor, s/n: C1496-1 

Board Turner-Transfers-Conveyors 

12’ dia. 5-arm board turner w/6” belt & drive 

14’ dia. lumber turntable w/drive 

High tech 48’ 5-strand 81X poly lugged transfer w/sets of (4) board turners 

(2) 22’ 6-strand 81X transfer w/(6) board hooks 

18’ 8-strand lumber unscramble w/motor to FALK square box reducer 

15’ 5-strand H130 re-entry deck 

14’ 6-strand 81XH re-entry deck w/motor to FALK square box reducer 

High tech 12’ 6-strand 81X lugged transfer 

8’ 6-strand 81XHD transfer 

180° engineered 6-strand transfer 

30”x50’ belt conveyor 

30”x30” belt conveyor 

Electrics 

GE 8000 line 8-section double sided MCC w/(31) switches, (2) GE ASTAT 200 hp soft starts w/GE 

3050 200 hp starters, ALLEN BRADLEY SLC 500 PLC w/(11) cards 

GE 8000 line 8-section double sided MCC w/(21) switches, (3) ALLEN BRADLEY SLC 500 PLC’s 

w/(6), (8) & (12) cards 

GE 8000 line 3-section double sided MCC w/(7) switches, (4) ALLEN BRADLEY 1336 PLUS II 

sensorless vectors 

GE 8000 line 4-section double sided MCC w/(19) switches & (2) ALLEN BRADLEY SLC 500 PLC’s 

GE 8000 line 5-section MCC w/(26) sections 

Grinding Room 

WESTERN 800 cutterhead grinder 

Cranes 

DESHAZO 2 ton x 24’ span bridge crane w/YALE 2 ton cable hoist, power travel & pendant controls 

DESHAZO 2 ton x 14’ span bridge crane w/YALE 2 ton cable hoist, power travel & pendant controls 

VENEER MILL 

RCO* 

2008 MEGTEC CS800-95 regenerative catalyst oxidizing system, natural gas fired, 85,000 wet 

scfm, oxidization temp 850°, thermal efficiency 95%, (2) heat exchange/column combustion 

chambers, natural gas burner, UV scanner, 120,000 scfm fan w/TOSHIBA 600 hp motor, ALLEN 

BRADLEY POWERFLEX 700H drive, ALLEN BRADLEY drives on 30 hp blower, 7.5 hp ISO, 

oxidizer & ISO rotary valve, zero leak damper, deluge system, knock out box, 50’ stack, ALLEN 

BRADLEY 5-section MCC, MEGTEC controls (*sold subject to confirmation) 

Pedestal & Track Mounted Log Loaders 

PRENTICE 410D pedestal mount log loader w/75 hp motor, 30’ boom, PRENTICE swivel grapple, 

heel boom 

PRENTICE 210D track mounted log loader w/CUMMINS 4-cylinder diesel engine, 32’ boom w/ 

PRENTICE swivel grapple, s/n: 210P50143 


Weyerhaeuser Pine Hill

l Lumber & Veneer Mill 

Debarkers 

KOCKUMS CAMBIO 30” 5-arm ring debarker w/approx. 75 hp ring drive motor, spike rolls, twin 

75 hp hydraulic unit, 11’ alligator chain infeed conveyors w/hydraulic drive, 11’ alligator chain 

outfeed conveyor w/motor to FALK square box, controls booth, s/n: S60-1052R 

(2) Partial KOCKUMS CAMBIO debarkers (may be sold a package) 

Whole Log Cut Off Saws 

Swing type cut off saw system w/(3) 72” saws, GE 75 hp/1190 rpm motors, (2) log clamps, log stop, 

(2) 6’ 3-strand H132 log conveyors w/motors to FALK square box reducers, SAS 40 hp hydraulic 

unit, 85’ infeed & 42’ outfeed 3-strand H132 log hauls, control booth 

(2) Partial swing type cut off saw systems (may be sold as package) 

Log Kickers-Log Stop & Loaders (may be sold as package) 

(3) 10’ 3-arm rotary log kickers w/HAGGLUND VIKING hydraulic drives 

(3) 8’ push type log sweeps 

(4) 19’ 9-double arm log stop & loaders 

Steam Vats (may be sold as package) 

(4) Concrete 120’ steam vats w/2-strand H132 log transfers, 20’ 2-strand H132 jack ladder transfers, 

in & outfeed H132 log hauls, all drives, aluminum hoods w/motors, (9) TWIN CITY steam 

blowers, associated steam piping, recirculating pumps & electrics 

Lathe-Drive-Charger 

COE 277D 102” veneer lathe w/3-1/2”x5-1/2” retractable chucks, approx. 300 hp DC drive, 

CALVERT 765 X-Y charger, roller nose bar, carriage w/DC drive, ORBIT 270 hp hydraulic unit 

w/(10) pumps, 2-strand infeed log transfer, outfeed log haul & belt, 10’ 2-arm hydraulic driven 

log kicker, partial controls & electrics 

Rotary Clipper-Scanners 

DURAND RAUTE 9’ rotary clipper, DURAND RAUTE 40 hp hydraulic unit, 12’ 5-strand 4” belt infeed 

transfer, 4’ 7-strand 6” outfeed belt, 3-strand vacuum type feeder w/fan, controls & electrics, 

spare rolls 

2003 VENTEK NV2000 8’ green veneer scanner, 10’ between towers 

Veneer Trays (may be sold as package) 

2-tray 60’ 8-strand 6” belt infeed veneer tray system, RELIANCE 40 hp/1150 rpm/240 volt drives 

3-tray outfeed veneer system w/65’ & 125’ 5-strand 6” belt trays, 65” 5-strand 6” pull tray & 125’ 

5-strand 5” trash tray, drives 

Stackers 

COE 12-bay dry veneer stacker w/4-1/2’ x 8’ hydraulic gravity roll scissor lifts, 4-strand belt feed 

thru transfer w/motor to REX reducer, 8’ 4-belt infeed transfer w/motor to REX reducer, outfeed 

rollcase, 4 & 3-strand transfers, 40 hp hydraulic unit, ALLEN BRADLEY 2100 6-section MCC 

w/(20) switches, (2) ALLEN BRADLEY POWERFLEX 700 & (3) ALLEN BRADLEY 15 hp 

frequency drives (in-house rebuild) 

(2) DURAND RAUTE single bay green veneer stackers, gravity roll, scissor lifts, hydraulic units, 

blowers, (1) w/infeed belts (may be sold as package) 

Dryers 

COE 4-tray veneer dryer w/(23) doors, (48) rolls per door, (18) stainless steel doors, SWEED/ 

COE ECONO VAC ACCUMATIC loader, s/n: 30393, 18’ 3-strand 81X scissor lift infeed w/20 

hp hydraulic unit, 24’ 3-strand 81X infeed transfer, SWEED 4-tray unloader w/motors to REX 

ATLAS reducers, 25’ 3-belt outfeed transfer to ELLIOTT BAY moisture meter, C55D outfeed 

transfer to METRIGUARD 8’ veneer scanner, s/n: 97238, C55D outfeed transfer, controls & 

electrics, steam pipe & valves, spare parts 

BABCOCK BSH THERMOJET 6-tray veneer dryer w/(23) doors, (84) rolls per door, SWEED/ 

DURAND RAUTE loader, s/n: 4-95-4342, 16’ 3-strand scissor lift infeed w/20 hp hydraulic 

unit, 18’ 3-strand 81X infeed transfer, SWEED 6-tray unloader to 20’ 16-strand 6” belt outfeed 

to C55D outfeed transfer, belt & roll transfer, separate ELLIOTT BAY moisture meter to 

METRIGUARD 8’ veneer scanner, s/n: 98018, 22’ belt transfer, controls & electrics, steam pipe 

& valves, spare parts 

Core Saw 

84” insert tooth core saw w/approx. 50 hp motor, 18’ 2-strand – 4-strand feed thru transfer 

Garden Tie Machine-2 Saw End Trimmer 

2008 MACO AR0967 garden tie machine w/stacked vertical arbor side heads, WEG 100 hp/1775 

rpm arbor drives, Temposonic positioned in & outfeed rolls, 5’ lugged infeed chain w/motor to 

reducer, outfeed belt, gearhead motor, controls, electrics 

2-saw end trimmer w/20’ 2-strand infeed transfer, 10’ 2-strand unscramble, 26’ & 40’ 2-strand H78 

outfeed transfers, hydraulic scissor lift w/hydraulic unit 


WEDNESDAY, APRIL 18

NO MINIMUMS* - NO RESERVES* 

Chippers 

(2) SODERHAMN 84” core chippers w/GE 250 hp/1150 rpm motors, feed 

rolls, horizontal infeed, bottom discharge, infeed belt, box chain outfeed 

conveyors, s/n: 84V-3 & 84V-4 

SODERHAMN 76” core chipper w/TOSHIBA 300 hp/1180 rpm motor, horizontal 

infeed, bottom discharge, infeed belt, box chain outfeed conveyor, s/n: 76- 

322 

Custom built 12” drum re-chipper w/RELIANCE 40 hp motor, drop infeed, bottom 

discharge 

Compressors-Dryers-Air Receiver 

SULLAIR LS-200S-150HA rotary screw compressor, 150 hp, 125-150 psig, air 

cooled, s/n: 200706210085 

SULLAIR LS25-150ACAC rotary screw compressor, 150 hp, 100-110 psig, air 

cooled, s/n: 003-106990 

SULLAIR 25B-150L-ACAC rotary screw compressor, 150 hp, 100-110 psig, air 

cooled, s/n: 003-70651 

SULLAIR 25-150L-ACAC rotary screw compressor, 150 hp, 100-110 psig, air 

cooled, s/n: 003-52032 

ZEKS HEAT SINK TRUE CYCLING heat dryer 2400HSFA40N, s/n: 239404 

w/ZEKS 2400 HDF filter, 150 psi, s/n: 239405 

RICHMOND ENGINEERING TK3, 54”x66” air receiver, 125 psi, s/n: K41579 

HENDERSON ENGINEERING HP3000, 60”x84” air receiver, 125 psi, s/n: 455 

Chip Bin 

Approx. 60-unit live bottom chip bin w/cross top screw auger 

Tarping Station 

(2) DAVID ROUND 500 lb electric hoists w/spreader bars, (2) 80’ rails 

Log Decks-Log Hauls 

35’ 3 & 4-strand H132 log deck, S-drive w/42’ 7-arm log stop & loader, motor to 

FALK square box drives, 55’ wide overall 

12’ 5-strand H132 partial log deck, S-drive, motor to FALK square box drive 

85’ 3-strand H132 infeed log haul to chop saws 

42’ 3-strand H132 outfeed log haul from chop saws 

(3) Approx. 75’ 2-strand H132 log hauls w/motors to FALK square box drives 

(may be sold as package) 

Rotary Screen Drum-Vibratory Conveyors-Belt Scales-Troughing Belt 

Conveyors-Screw Augers 

Rotary screen drum, 10’ dia. x 32’ long, 3/4” to 1-1/2” screen, RELIANCE X0X 

series 100 hp/1785 rpm motor to FALK 2120FCA, 68 rpm square box 

reducer 

VIBRA PRO 36”x approx. 105’ balanced vibratory conveyor 



(2) VIBRA PRO 36”x approx. 90’ balanced vibratory conveyors 


WEBSTER 24” x approx. 25’ balanced vibratory conveyor 

WEBSTER 24” x approx. 12’ balanced vibratory conveyor 

EDEM 24” x approx. 19’ balanced vibratory conveyor 

(2) 2008 THAYER 5200 series belt scales w/operator interface panels 

(2) 36”x approx. 155’ troughing belts w/motor to FALK square box reducer 

36”x approx. 100’ troughing belt w/80’ of hoods, MARTIN ENGINEERING belt 

tensioner 


tensioner 


tensioner 


tensioner 

36”x approx. 60’ troughing belt w/30’ of hoods, MDI metal detector, MARTIN 

ENGINEERING belt tensioner, motor to FALK shaft mounted reducer 

Approx. 16”x60’ screw auger w/motor to shaft mounted reducer 

Approx. 16”x36’ screw auger w/motor to shaft mounted reducer 

Grinding Room 

(2) HANCHETT size 130AK travel head knife grinders 

ARASMITH lily pad knife sharpener 

ADCO WEST K6-1120-15 knife sharpener (for MACO garden tie machine) 

(2) Large babbit pots, assorted knives, jigs 

Bid live or bid online 

with MurphyLIVE! 

Chain & Belt Conveyors 

(2) Approx. 90’ 2”x8” long link w/flites conveyors, motor to FALK square box reducer 

Approx. 75’ 2-strand 6”x15” box chain conveyor, motor to reducer 

Approx. 65’ 2-strand 8”x15” box chain conveyor, motor to reducer 

Approx. 60’ 3-srand 6”x11” box chain conveyor, motor to REX VENUS reducer 

Approx. 42’ 2-strand 6”x11” box chain conveyor, motor to FALK square box reducer 

30” x approx. 72’ chevron belt conveyor w/MDI CR85 metal detector, motor to reducer, 

s/n: 990725 

24’ dia. round table 

Electrical 















Machine Shop-Equipment 

COLCHESTER MASCOT 1600 engine lathe, 24”x84” swing, 3” thru hole, 36-1600 

spindle speeds, 4-jaw chuck 

WELLS INDEX 847 vertical mill w/9”x52” T-slot table, s/n: 10497 

Heavy duty keyway cutter 

WELLSAW 1016 horizontal metal cutting bandsaw 

ACCO 40 ton hydraulic shop press 

AIRCO #2 single troch pantograph 

DAYTON 17” drill press, POWERMATIC 12” vertical grinder, double end grinders 

LINCOLN RANGER 250 gas welder/generator, 1105 hrs 

LINCOLN RANGER 8, 225 amp welder/generator, 1520 hrs 

LINCOLN CLASSIC SA300 diesel welder/generator 

MILLER DIMENSION 652 DC welder, s/n: LG070824C 

MILLER SRH444 DC welder 

LINCOLN SRH333 AC/DC welder 

LINCOLN IDEALARC R3R300 AC/DC welder 

LINCOLN IDEALARC 250 AC/DC welder 

LINCOLN PROCUT 60 plasma machine 

LINCOLN LN25 wire feeder 

(2) Rod ovens 

Oxy-acetylene sets 

Miscellaneous Equipment, Tools & Supplies 

2001 TAYLOR CPS 2000 MV coalescing phase separator (oily water), 125 gpm 

CPS00636; (8) manufactured portable buildings; WEATHERHEAD & PARKER die 

crimpers; (2) 5000 lb shop A-frames; GRAY TNT air lift; DAYTON 10” contractors 

table saw; 3000 psi pressure washer; TITAN 5500 lb pallet jack; warehouse steps; 

ladders; portable heaters; floor fans; flammables cabinets; spare belting; cylinders; 

shafting; steel in racks; veneer carts; bunk racks; chain falls; sockets; wrenches; air 

& electric hand tools; AMES hardness tester; wheel & bearing pullers; ENERPAC 

pumps; broach set; clevises; clamps; grease guns; safety harnesses; rigging slings; 

welding lead; rail jack; clean up tools; office furniture; anvil 

Rolling Stock 

2000 CAT 980G rubber tire loader w/pole forks, 29.5-25 tires, cab guard, s/n: 2KR03930 

2000 TAYLOR TLS1000 rubber tire log stacker w/push forks, 50 ton 2 WD, 8220 hrs, 

s/n: SZ428500 

1991 TAYLOR TLS1000 rubber tire log stacker w/push forks, 50 ton 2 WD, 8284 hrs, 

s/n: SZ420894 

2006 TAYLOR TH350L forklift, 35,000 lb capacity, CUMMINS diesel engine, power shift 

8’ forks, 9194 hrs, s/n: SBH33743 

2005 TAYLOR T360 forklift, 36,000 lb capacity, DETROIT 60 series diesel engine, 8’ 

forks, 2222 hrs, s/n: SBG32590 

2007 HYSTER H80 FORTIS forklift, 8,000 lb capacity, propane, Monotrol, 163.9” 

2-stage clear view mast, fingertip controls, solid & pneumatic tires, 6000 hrs, s/n: 

N005V02123E 

2006 HYSTER H80XM forklift, 8,000 lb capacity, propane, Monotrol, 163.9” 2-stage clear 

view mast, solid & pneumatic tires, s/n: L005V07342D 

(2) 2001 HYSTER H80XM forklifts, 8,000 lb capacity, propane, Monotrol, 163.9” 2-stage 

clear view mast, solid & pneumatic tires, s/n: K005D06424Y & K005D06425Y 

2002 JLG 600SJ manlift, 60’ reach, 500 lb capacity, s/n: 0300027977 

2000 FREIGHTLINER FL70 tandem axle dump truck, CUMMINS diesel, automatic 

transmission, 12-14 yard dump box, PTO, 31,871 miles

Equipment Available for Purchase 

Side Cover Applicator* 

2007 CON-VEY KEYSTONE Model 1983 OSB side cover applicator, new – 

never put into service, width: 48” & 49”, length: 96”, height full pack: 33”- 

38”, height half pack: 17-1/2”-18”, weight: 5,000 lb max, cover sheets: 

material - corrugated kraft paper, thickness: approx. 1/8”, width: 24” & 

41”, length: 110”, stack: approx. 40” high (350) count, printed side down 

*Note: this machine is located in Grayling, Michigan and is available 

for purchase directly from Weyerhaeuser. Please contact Elaine 

Webber at elaine.webber@weyerhaeuser.com 

Equipment dismantling and removal 

to be done by Approved 

Weyerhaeuser Contractors only 


TERMS & CONDITIONS 

An On-Site Buyers Premium of 10% will be charged on all successful bids. 

An Online Buyers Premium of 13% will be charged on all successful bids. 

PAYMENT: Full payment must be made by no later than 4pm, Thursday, April 19. 

A 25% deposit is required by the close of business, auction day. 

Cash, cashiers check, Master & Visa Cards, wire transfers only. Personal or 

company checks accepted ONLY with bank letter of guarantee. 

Absentee bids accepted with 25% deposit 

REMOVAL: No purchase may be removed during the auction unless otherwise 

announced by the auctioneer. Removal schedule announced on auction day. 

Equipment dismantling and removal to be done by Approved Weyerhaeuser 

Contractors only 

Announcements made by the auctioneer at the time of sale take precedence over 

printed matter. 

Auctioneer reserves the right to sell accessories, parts or attachments on a 

separate and/or aggregate basis. 

Due to safety & insurance reasons, persons under 18 not admitted. 

Alabama Auction License #1481 

Washington Auctioneers License #1960 

LODGING 

Thomasville, AL – approx. 16 miles from sale site 

America’s Best Value Inn 334-636-0123 

Comfort Inn 334-636-2000 

North Park Inn 334-636-0202 

Sunset Inn 334-636-5467 

Mobile Regional Airport 

Montgomery Regional Airport 

Birmingham International Airport 

AIRPORTS 

DRIVER DIRECTIONS 

The auction site is located on Hwy 10, approximately 6 miles east of Pine Hill. 

WATCH FOR AUCTION SIGNS 

Food Service Available at the Auction Site

Public Auction Wednesday, April 18, 2012 



P.O. Box 82160, Kenmore, Wa 98028 

(2) Taylor TLS 1000 Log Stackers 



PUBLIC AUCTION 

PINE HILL LUMBER 

& VENEER MILL 

PRESORTED 

FIRST CLASS MAIL 

U.S. POSTAGE 

PAID 

SEATTLE, WA 

PERMIT NO. 963 

9AM - WEDNESDAY - APRIL 18 

Preview 8-4, Tuesday, April 17 

7616 Hwy 10W • Pine Hill, AL 36769 


NO MINIMUMS* • NO RESERVES*

Download pdf Brochure - James G. Murphy Co.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?