Download pdf Brochure - James G. Murphy Co.

James G. Murphy Co.
Commercial & Industrial Auctioneers
PUBLIC AUCTION
Closing Mill
Sawmill Equipment, Rolling Stock
9AM - TUESDAY - OCTOBER 23
Preview 8-4, Monday, October 22
361 Chandler Rd, Chehalis, WA 98532
Baghouse
HOFFMAN Cedar Products
2002 Baker Resaw System - Installed, Never Used
Klamath 60” Headrig
For more information go to www.murphyauction.com • Phone 425.486.1246

NO MINIMUMS - NO RESERVES
MILL EQUIPMENT
OLYMPIC 50 hp hydraulic pedestal mount log loader w/42” rotary
grapple, log deck control panel
MORBARK 640 rosserhead debarker, 6”-36” diameter capacity,
75 hp main drive, 30 hp auxiliary drive, 110 gallon hydraulic
tank, operators cab, 25’ track type floating infeed conveyor w/
hydraulic drive
SALEM 72” insert tooth whole log cut off saw w/75 hp motor, 6’ &
8’ log stops, spare saws, s/n: 787471
4’-8’ chain type cut off saw bars
MDI TWA2000 whole log metal detector, 44”x52” chute, s/n:
4572C, CR85 search coil, s/n: 41990
KLAMATH 60” left hand twin column air strain headrig bandmill
w/125 hp/875rpm motor
MCDONOUGH 62” headrig bandmill, s/n: 62M-182
KLAMATH 5’ right hand headrig bandmill, s/n: 11366
MISSOULA 42”x8’ left hand Temposonic positioned 2-knee
carriage w/hydraulic positioned dogs, 2-trucks, pantograph,
bumpers, rail
POWER TRANSMISSION PRODUCTS 30 hp hydraulic carriage
drive
(2) Spare TYRONE BERRY 215 hydraulic carriage drives
2009 AUTOMATION ELECTRICS carriage setworks
Hydraulic log turner, 4-arm log stop & loader, log kickers
STENNER 42” twin vertical hydraulic overhead end dogging
scragg w/40 hp motors, both sides set, 4”-18” diameter, 4’-9’
length capacities, PAC MAN log singulators, hydraulic log
positioning rolls, 25 hp hydraulic unit
2002 BAKER BBR-O 9-saw horizontal band resaw system,
12”x18” capacity, 30 hp motors, 12” hydraulic driven feed
thru belt, hydraulic tilting feed rolls, blade tensioning, clean
up wheel, approx 25 hp hydraulic unit, s/n: 02-3192, installed,
never used
2007 BAKER BBR-O 6-saw & 3-saw combined horizontal band
resaw system, 8”x12” capacity, 20 hp motors, 12” hydraulic
driven feed thru belt, hydraulic tilting feed rolls, blade
tensioning, clean up wheel, (2) 10 hp hydraulic units, s/n: 07-
3823
MERSHON 48” twin vertical band resaw w/tilting feed rolls, s/n:
7068
TANNEWITZ type R1, 42” vertical band resaw w/aluminum
wheels
AMERICAN vertical band resaw w/aluminum wheels
(4) FASTLINE FLSS34 Super Scragg resaws, (2) 36” vertical &
(2) 36” horizontal band resaws
SCHURMAN 6”x42” splined top arbor edger w/125 hp motor,
babbit guided, lube system, in & outfeed rollcases, spare saws
Modified pocket edger w/approx 48” multi-ripsaw arbor w/split
saws & hydro lock heads, chromed knurled rolls, split roll
infeed, 7-strand slat chain outfeed, spare saws
Modified LSI 10’ individually motorized trimmer w/zero saw,
hydraulic single stage fence, (3) approx 10 hp/3500 rpm
motors, 8’ 6-strand lugged feed thru transfer, spare saws
Modified PET/VALLEY trimmer w/end trim saw, 1’ steps, lugged
feed thru transfer
PRODUCTO dog ear machine w/(2) approx 10 hp saws, lugged
feed thru chain, 8’ 3-strand H78 poly chain transfer, s/n:
2090483
MONTGOMERY ER39PMKC blo hog w/TOSHIBA 100 hp motor,
s/n: 1266
KOCKUMS 58, 8-knife chipper (reconditioned), horizontal infeed,
bottom discharge, s/n: 059-229
KOCKUMS 58, 8-knife chipper w/approx 200 hp motor, horizontal
infeed, bottom discharge, s/n: 059-261
SODERHAMN 48, 6-knife chipper w/approx 100 hp motor,
horizontal infeed, bottom discharge, s/n: 749
BUSH 36” 6-knife chipper, horizontal infeed, top discharge
PRECISION 6’x6’ 2-deck chip screen
GENERAL KINETICS 12”x34’ vibratory conveyor
CARTER DAY 24RJ-98-CJTI-379 draw thru baghouse system,
11’ drawer w/(379) bags (16-5/8” flat x 10’ long) pulse cleaner,
WESTERN PNEUMATICS 20”x20” rotary air lock
13’ diameter long neck cyclone w/WESTERN PNEUMATICS
20”x20” rotary air lock
(3) Approx 24-unit bolt together chip bins w/pneumatic gates, NYB
GI size 451 blower, s/n: 8760
24” blower w/20 hp motor
2004 ROGERS MG25-125 rotary screw compressor w/25 hp
motor, 14,771 hrs, s/n: 040437
QNW C-30D tank mounted rotary screw compressor w/30 hp
motor, 4934 hrs, s/n: 88097
(2) WOODS 134BM moulders, approx 4”x10” to 13” capacity,
5-heads, 15 hp top, 10 hp side, 7.5 hp side, 15 hp top & 15 hp
bottom heads, spare heads & parts, s/n’s: 26908, 26834
LENOX TL1000 blade welder w/new ENTRON EN280 annealer
(2) ARMSTONG #4 bandsaw sharpeners, s/n’s: 3705 & 4414
(2) ARMSTRONG #2 bandsaw sharpeners, s/n: 12255
ARMSTRONG #5 stretcher rolls, s/n: 9096
ARMSTRONG auto tip
ARMSTRONG equalizer
ISELLI bandsaw side grinder
(2) COOK CAT CLAW bandsaw grinders w/variable speed
controls
COOK bandsaw tensioner
SUFFOLK bandsaw setter
ACME BSA-1100 tall boy sharpener
NEILSEN K200 chain sharpener, s/n: 7B143
SALEM dual guide grinder
For more information go to
www.murphyauction.com
Phone 425.486.1246

AUCTION STARTS AT 9AM
MORBARK 60 traveling head knife grinder, s/n: 716
BARNHARDT wheel grinder
ARMSTRONG swages & shapers, babbit pots, large
quantity of spare saws, bandsaw steel
SIEMENS ITE 2000 amp 3-section dead front switchboard,
480/277 volt w/ground fault interrupter
SQUARE D 600 amp 1-section main, 600 volt
SQUARE D power style switchboard w/(2) 200 & (4) 100 &
(12) 30 amp breakers
GE 8000 line 4-section MCC w/(13) switches
SQUARE D 4-section MCC w/(13) switches
SQUARE D starter panel w/(1) size 3, (4) size 2 & (10) size
0 starters
SQUARE D starter panel w/(2) size 2, (3) size 1 & (7) size 0
starters
Starter panel w/(4) ALLEN BRADLEY size 4 combo starters
SQUARE D Avitar 66, 60 hp soft start
Soft starts to 200 hp, disconnects to 800 amp, (200±) motors
to 200 hp, electrical supplies
30’x80’x100’ all steel building (disassembled)
LODEC L3231 portable axle load cell scales, 30,000 &
60,000 lb capacities, s/n: 102
CALIFORNIA PELLET MILL CPM, pellet mill, 20 hp w/pallet
wrapper, s/n: 260902
GLOBE ripsaw
SHAKE MASTER 24 shake machine, s/n: 81A203
Shake splitter
MID OREGON, INDUSTIRAL, IRVINGTON & TRI-STATE
chop saws
SWEED scrap chopper
RIDGID 300 pipe threader
MILLER 400 amp welder, AIRCO AIRCOMATIC 300 amp welder
w/wire feed, MONARCH 20-1/2” swing turret lathe, large
assortments of cylinders, valves, hydraulic pumps & motors,
hydraulic units to 50 hp, much more!
20’ 5-strand split log deck, S-drive, SKK 10 hp/45 rpm reducer
20’ 3-strand split log deck, S-drive, WESTINGHOUSE 3 hp/45 rpm
reducer
10’ 5-strand log deck w/US 5 hp/48 rpm reducer
32’ 4-strand log deck transfer w/motor to WESTERN reducer
28’ 3-strand log deck transfer w/GE 7.5 hp gearhead
21’ 3-strand log deck transfer w/gearhead
9’ 6-strand log deck w/SKK 5 hp/45 rpm reducer
42’ H132 w/flites log haul w/kicker, GE motor to reducer
32’ 6”x12” box chain w/flites, hydraulic drive
12”x36’ log belt transfer w/log stops, gearhead motor
12”x25’ log belt transfer w/gearhead motor
Approx 12’ hourglass log rollcase w/(4) rolls, air bags
Lumber transfers to 56’, chain conveyors to 70’, belt conveyors to
72’, belt transfers to 70’
ROLLING STOCK
HYSTER S50XM forklift, 5000 lb capacity, prone, 83.9” 2-stage mast
w/side shift, 42” forks, solid tires, 1444.6 hrs, s/n: D187V18084X
HYSTER E35XL forklift, 3500 lb capacity, 48 volt electric, 191.5”
2-stage mast w/side shift, 42” forks, solid tires, 48 volt charger,
s/n: C114V06243P
TOYOTA 02-34D35 forklift, 8000 lb capacity, gas, 185” 2-stage mast
w/side shift, 48” forks, dual solid tires, s/n: 3FD35-12994
KOMATSU FG40Z2-6 forklift, 7000 lb capacity, propane, 146”
2-stage mast w/side shift, 48” forks, dual pneumatic tires, s/n:
FG4022-6
TERMS & CONDITIONS
An On-Site Buyers Premium of 10% will be charged on all successful bids.
An Online Buyers Premium of 13% will be charged on all successful bids.
PAYMENT: Full payment must be made by the close of business, auction day.
Cash, cashiers check, Master & Visa Cards, wire transfers only. Personal or
company checks accepted ONLY with bank letter of guarantee.
Absentee bids accepted with 25% deposit
REMOVAL: No purchase may be removed during the auction unless otherwise
announced by the auctioneer. Removal schedule announced on auction day.
Announcements made by the auctioneer at the time of sale take precedence
over printed matter.
Auctioneer reserves the right to sell accessories, parts or attachments on a
separate and/or aggregate basis.
WARRANTY DISCLAIMER: ALL SALES ARE FINAL. All items are being
sold “As Is, Where Is”, with all faults and without any warranties as to
merchantability of fitness for a particular purpose. The principal, the
auctioneer, the advertising coordinator, and any of their agents make no
express or implied warranties of any type.
Due to safety & insurance reasons, persons under 12 not admitted.
DRIVER DIRECTIONS
From north or southbound I-5, take the Hwy 6/Raymond/Pe Ell exit (#77). Drive
west on Hwy 6 approximately 17 miles to Chandler Rd. Turn right and drive
north on Chandler Rd approximately 1.2 miles to the auction site, located on
the right.
WATCH FOR AUCTION SIGNS
FOOD SERVICE AVAILABLE AT THE AUCTION SITE

NO MINIMUMS / NO RESERVES
9AM - TUESDAY
October 23, 2012
Preview 8-4, Monday, October 22
James G. Murphy Co.
Commercial & Industrial Auctioneers
P.O. Box 82160, Kenmore, WA 98028
James G. Murphy Co.
Commercial & Industrial Auctioneers
PUBLIC AUCTION
2007 Baker Resaw System
For more information go to
www.murphyauction.com
Phone 425.486.1246
Closing Mill
HOFFMAN Cedar Products
Sawmill Equipment, Rolling Stock
361 Chandler Rd
Chehalis, WA 98532
PRESORTED
FIRST CLASS MAIL
U.S. POSTAGE
PAID
SEATTLE, WA
PERMIT NO. 963