Controller Area Network(CAN) - PCI-Tuning

Adds "Controller Area Network(CAN)" to enforce MB diagnosis function.
WIN-STAR Diagnostic system Function List-----Mercedes-Benz
WIN-STAR kit, including of:
1.Multiplexer box.
2.Cables, including of :
a. RS232 Cable(from PC or Notebook to multiplexer box)
b. 16 PIN cable(from multiplexer box to vehicle)
c. 38 PIN cable(from multiplexer box to vehicle)
3. Instruction manual.
4. Suit case.
UPDATE 2004/12/30
Version : CAN
Software version : A1210
System
Model
Function
ECU 211 220
ECU
model
Read DTC
Erase
DTC
Live
data
Reset Correction programming Actuation
Powertrain
Electronic selector level module(EWM211) V V V V V
Common-Rail Diesel injection(CDI 3 CAN )
Chassis
V V V V V
Tire pressure monitor(TPC)
Body
V V V V V
Airbag (ARMADA211) V V V V V V
Central gateway(CGW211) V V V V
Left front reversible emergency tensioning retractor(RevETR-LF) V V V V V
Right front reversible emergency tensioning retractor(RevETR-RF) V V V V V
Electronic ignition switch(EIS) [EZS211] V V V V V V
Headlamp range adjustment(HRA211) [LWR211] V V V V V V
Overhead control panel(OCP) [DBE211] V V V V V V
Overhead control panel(OCP) [DBE220] V V V V V
Upper control panel(UCP) [OBF211] V V V V V V
Upper control panel(UCP) [OBF220_CAN] V V V V V
Lower control panel(LCP) [UBF211] V V V V V
Driver-side signal acquisition and actuation module (SAM-FL211) V V V V V V
Passenger-side signal acquisition and actuation module(SAM-FR211) V V V V V V
Rear signal acquisition and actuation module (REAR-SAM211) V V V V V V
Battery control module(BCM) [BSG211] V V V V V
Trailer recognition(AHE) [AAG211] V V V V V
Special vehicle multifunction control module (SVMCM) [MSS211]
Information & communication
V V V V
Instrument cluster module(ICM) [KI211] V V V V V V
Active Service System(ASSYST) V V V V V
PLUS Active Service System(ASSYST PLUS) V V V V V
Steering column module(SCM211) V V V V V V
Parktronic(PTS211) V V V V V V
Audio , video, navigation and telematics V V V V V V

System
Model Function
ECU 211 220
ECU
model
Read DTC
Erase
DTC
Live
data
Reset Correction programming Actuation
Audio , video, navigation and telematics V V V V V V V
Navigation ( Only in connection with COMAND ) ( Not valid for Japan ) ( NAVI ) V V V V V
Telematic services WAP , E-mail , Mercedes-Benz Portal(MB Portal) V V V V V
Voice control , hands-free system and microphones( Not valid for Japan )(VCS) V V V V V
Satellite radio(USA)(SDAR) V V V V V
Hands-free system and microphone(HFS)
Seats & doors
V V V V V
Front-left door control module(DCM-FL) [TSGVL211] V V V V V V
Front-right door control module(DCM-FR) [TSGVR211] V V V V V V
System
Function
ECU
211 220
ECU
model
Read DTC
Erase
DTC
Live
data
Reset Correction programming Actuation
Rear-left door control module(DCM-RL) [TSGHL211] V V V V V V
Rear-right door control module(DCM-RR) [TSGHR211] V V V V V V
Driver electric seat adjustment (SSGF211) V V V V V
Passenger electric seat adjustment(SSGB211) V V V V V
ESA driver - Electric seat adjustment driver ( with memory ) ( ESA - driver ) V V V V V
ESA passenger - Electric seat adjustment front passenger ( with memory ) (
ESA - passenger )
V V V V V
Left front dynamic seat(DS-LF) V V V V V
Right front dynamic seat(DS-RF) V V V V V
Left front dynamic seat(DS-LF) V V V V V
Pneumatic pump for dynamic seat(DSP220) V V V V V
Trunk lid control(TLC211)
Air conditioning
V V V V V
Stationary heater(STH) [STH211] V V V V V
Stationary heater(STH) [STH220_CAN] V V V V V
Automatic air conditioning(AAC) [KLA211] V V V V V
REMARK:
1. Customers of WIN-STAR diagnostic software are free from updating program due to its bugs or errors for lifetime.
2. Details for each version please refer to “WIN-STAR Software Version Specification Coverage”. Listed function with marked “V “ means available functions.
3. Above WIN-STAR functions listed for each different car style depends on different constructed function (following designed in the car manufacturer). When you are displaying the software
program, if it could not connect (or communicated ) with the multiplexer , please double check if the system constructed for the scanned car or the system you choosed is correct. Should you
have any question or need some more information , please feel free to contact us I.C.M. INC. by Tel: 886-7-5577691, Fax:886-7-5575965 or E-mail: icm@icm.com.tw
4. It is free update WIN-STAR program due to the bugs or errors in programs for the users of WIN-STAR diagnostic software lifelong. Please require latest program with your distributor at
anytime or welcome go website: http://www.icm.com.tw NEWS button for prompt update.
WIN-STAR hardware required of NOTEBOOK or PC :
1. CPU:Pentium III 1GHz or above.
2. 256MB RAM or above.
3. Resolution:1024*768.
4. CD-ROM:24X or above.
5. Hard disk space 500 MB or above.
WIN-STAR software required :
1. Operation system : Windows XP。It is NOT suitable for Windows ME.
2. WIN STAR application program (CD)。