Blaster CD 8x - Creative
Blaster CD 8x - Creative Blaster CD 8x - Creative
DOS QuickCD Control Panel Using the Keyboard DOS QuickCD has the same controls found on most CD players as well as some additional features. The following list describes the controls: Eject Ejects/closes the tray. Play Starts playing the track shown in the Track box. Stop Stops playing the track. Pause/resume Pauses or resumes playing the track. Next track Selects the next track and plays it. At the end of the CD, the first track is played. Previous track Selects the previous track and plays it. At the start of the CD, the first track is played. Fast forward Forwards the track by 16 seconds. If the end of the last track is encountered, this function is ignored. Rewind At the start of the first track, this function is ignored. Next drive Changes to the next CD-ROM drive. If there is only one drive, this function is ignored. Drive Displays the current drive. Mode Displays the current operation. Total time Displays the total time to play all the tracks on the CD. Volume control Controls the volume of the CD audio. To increase or decrease the volume, use the up or down arrow keys. Track Displays the current track and the time duration. Use the TAB key to move from one control to the next. To activate a control, press the TAB key until the control is highlighted; press the ENTER key to activate the control. QuickCD 3-7
Using the Mouse Place the mouse cursor on the desired control; click the mouse button to activate the control. Quitting DOS QuickCD To quit DOS QuickCD: q Press ESC, or q Click the Title box (“QuickCD”). QuickCD 3-8
- Page 1 and 2: Blaster CD 8x User Guide On-line Ve
- Page 3 and 4: Appendix A Troubleshooting CD-ROM D
- Page 5 and 6: Regulatory Information Notice for t
- Page 7 and 8: System Requirements Disk Backup To
- Page 9 and 10: . . . Ellipses indicate that the pr
- Page 11 and 12: Installing the CD-ROM Drive Figure
- Page 13 and 14: Connecting the CD-ROM Drive to the
- Page 15 and 16: Installing the Interface Card Use t
- Page 17 and 18: The data cable is designed to fit i
- Page 19 and 20: 2. Connect the CD-ROM audio cable t
- Page 21 and 22: 2 Installing the Blaster CD 8x Soft
- Page 23 and 24: 8. When the installation is complet
- Page 25 and 26: 8. Choose Next. The Choose Destinat
- Page 27 and 28: 11. The Setup Complete dialog appea
- Page 29 and 30: Installing Software in DOS/Windows
- Page 31 and 32: Testing the Installation The test p
- Page 33 and 34: To add Windows QuickCD to Accessori
- Page 35 and 36: Using the Control Menu The Control
- Page 37: DOS QuickCD To run DOS QuickCD: Nex
- Page 41 and 42: Solutions: The problem may be corre
- Page 43 and 44: DOS Applications PROBLEM: There is
- Page 45 and 46: Using Creative IDE CD-ROM Drive in
- Page 47 and 48: MSCDEX.EXE Select the primary port
- Page 49 and 50: q You have changed the resource set
- Page 51 and 52: Legacy Cards Section Add Button Eac
- Page 53 and 54: Adding a CD-ROM Drive You can daisy
- Page 55 and 56: In DOS/Windows 3.x After connecting
- Page 57 and 58: Typical Audio Performance Sampling
- Page 59 and 60: North, Central, and South America I
DOS Quick<strong>CD</strong> Control Panel<br />
Using the Keyboard<br />
DOS Quick<strong>CD</strong> has the same controls found on most <strong>CD</strong> players as well<br />
as some additional features. The following list describes the controls:<br />
Eject Ejects/closes the tray.<br />
Play Starts playing the track shown in the Track box.<br />
Stop Stops playing the track.<br />
Pause/resume Pauses or resumes playing the track.<br />
Next track Selects the next track and plays it. At the end of the<br />
<strong>CD</strong>, the first track is played.<br />
Previous track Selects the previous track and plays it. At the start of<br />
the <strong>CD</strong>, the first track is played.<br />
Fast forward Forwards the track by 16 seconds. If the end of the<br />
last track is encountered, this function is ignored.<br />
Rewind At the start of the first track, this function is ignored.<br />
Next drive Changes to the next <strong>CD</strong>-ROM drive. If there is only<br />
one drive, this function is ignored.<br />
Drive Displays the current drive.<br />
Mode Displays the current operation.<br />
Total time Displays the total time to play all the tracks on the<br />
<strong>CD</strong>.<br />
Volume control Controls the volume of the <strong>CD</strong> audio. To increase or<br />
decrease the volume, use the up or down arrow keys.<br />
Track Displays the current track and the time duration.<br />
Use the TAB key to move from one control to the next. To activate a<br />
control, press the TAB key until the control is highlighted; press the<br />
ENTER key to activate the control.<br />
Quick<strong>CD</strong> 3-7
Change language