Blaster CD 8x - Creative
Blaster CD 8x - Creative
Blaster CD 8x - Creative
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Testing the Installation<br />
The test program TEST<strong>CD</strong> ensures that you have installed the <strong>Blaster</strong><br />
<strong>CD</strong> <strong>8x</strong> correctly and it is working properly.<br />
To test the <strong>CD</strong>-ROM drive:<br />
1. Load an audio (music) <strong>CD</strong> into your <strong>CD</strong>-ROM drive.<br />
2. Change to the <strong>CD</strong>-ROM software directory (C:\SB<strong>CD</strong> is the<br />
default), and type TEST<strong>CD</strong> and press the ENTER key.<br />
3. Follow the instructions on the screen.<br />
TEST<strong>CD</strong> requires an audio <strong>CD</strong> to preform the test. If a data <strong>CD</strong><br />
is used the program will prompt you for an audio <strong>CD</strong>. If no <strong>CD</strong><br />
is in the drive an error message will appear.<br />
The test does the following:<br />
q Checks the <strong>CD</strong>-ROM drive setup. If an MS<strong>CD</strong>EX error<br />
message is displayed, check that SBIDE.SYS is properly<br />
installed. Also, check the data and power cables connected to<br />
the <strong>CD</strong>-ROM drive.<br />
q Checks for audio output. If there is no audio output, refer to<br />
Appendix A, “Troubleshooting.”<br />
Installing the <strong>Blaster</strong> <strong>CD</strong> <strong>8x</strong> Software 2-11