Blaster CD 8x - Creative
Blaster CD 8x - Creative
Blaster CD 8x - Creative
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2. Connect one end of the data cable to the rear of the <strong>8x</strong> <strong>CD</strong>-ROM<br />
drive. Attach the center connector to your hard disk, and the<br />
other end to the hard disk controller (Figure 1-5).<br />
<strong>CD</strong>-ROM drive<br />
(slave)<br />
Hard disk drive<br />
(master)<br />
Hard disk<br />
data connector<br />
<strong>CD</strong>-ROM<br />
audio cable<br />
Hard disk<br />
controller card<br />
Pin 1<br />
Power<br />
cable<br />
Data cable<br />
Power cable<br />
Colored<br />
stripe<br />
Figure 1-5: Connecting the <strong>Blaster</strong> <strong>CD</strong> <strong>8x</strong> to the hard disk controller (your controller may differ)<br />
The <strong>CD</strong>-ROM data cable must be connected to the <strong>CD</strong>-ROM<br />
drive, hard disk drive, and to the hard disk controller so that the<br />
colored stripe corresponds to pin 1 on all connectors.<br />
3. Refer to “Installing the <strong>Blaster</strong> <strong>CD</strong> <strong>8x</strong> with an Audio Card” to<br />
connect audio <strong>CD</strong> sound capabilities to the audio card installed<br />
in your system.<br />
4. Replace the cover on your computer and plug in and turn on the<br />
computer.<br />
Installing the <strong>Blaster</strong> <strong>CD</strong> <strong>8x</strong> 1-5
Change language