Blaster CD 8x - Creative
Blaster CD 8x - Creative
Blaster CD 8x - Creative
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Connecting the <strong>CD</strong>-ROM Drive to the Hard Disk Controller<br />
Connecting to your IDE hard disk controller provides optimum<br />
performance from the <strong>8x</strong> <strong>CD</strong>-ROM drive.<br />
Back up the data on your hard disk before connecting the data<br />
cable to your hard disk controller. Refer to your Windows or<br />
DOS documentation for more information.<br />
Contact your computer sales representative for the necessary<br />
daisy-chain cable required to connect the drive to the hard disk<br />
controller.<br />
A maximum of two devices can be connected to an IDE<br />
controller interface.<br />
Refer to the documentation that came with your computer or<br />
hard disk controller for additional information concerning your<br />
IDE controller.<br />
To connect the <strong>Blaster</strong> <strong>CD</strong> <strong>8x</strong> to your hard disk controller:<br />
1. Connect the power cable from the computer power supply as<br />
shown in Figure 1-4.<br />
<strong>CD</strong>-ROM drive<br />
Power cable<br />
Figure 1-4: Connecting the power cable to the <strong>Blaster</strong> <strong>CD</strong> <strong>8x</strong><br />
Installing the <strong>Blaster</strong> <strong>CD</strong> <strong>8x</strong> 1-4