Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Using External Sends & Returns<br />
An External Send/Return breaks the signal at the insert point and sends it out to the<br />
selected external destination such as a compressor, a stereo effect processor or any other<br />
audio device. Any physical input or output can be used.<br />
To Insert an External Signal Processing Device:<br />
Outboard Signal Processor<br />
1. Right-click on the insert chain and select the Insert Send/Return (Physical Output<br />
and Input). The popup dialog box shown above appears.<br />
2. Select the output and input you wish to use.<br />
3. Connect your external audio gear to the appropriate analog or digital connectors.<br />
4. If you’re using the analog outputs and inputs, you may have to adjust the levels in<br />
the I/O Session Settings. See page 14. You can insert a level meter after the Send/<br />
Return to make sure you’re getting a strong signal back from the external device.<br />
5. If you’re using a digital Send/Return, make sure that the external digital device is<br />
synchronized to the digital input. Otherwise, poor audio quality will result.<br />
(Alternatively, you can synchronize PatchMix DSP to your external device in the System<br />
Session Settings. See page 14.)<br />
6 - Working with ASIO<br />
Connection Setups<br />
E-MU Digital Audio System 63<br />
S/PDIF<br />
Input<br />
S/PDIF<br />
Output<br />
The Send/Return Inserts allow you to connect your favorite external analog or digital gear.
Change language