Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
6 - Working with ASIO<br />
Direct Monitoring<br />
Another view of Direct Monitoring<br />
ASIO<br />
Direct<br />
Monitor<br />
Send<br />
Return<br />
Panning<br />
Fader<br />
Input<br />
Pan<br />
Volume<br />
Main Output Bus<br />
Recording<br />
Software<br />
(recording)<br />
Control Control<br />
Aux 1 Bus<br />
Aux 2 Bus<br />
ASIO<br />
Direct<br />
Monitor<br />
Send<br />
Return<br />
Panning<br />
Fader<br />
Input<br />
Add a Direct Monitor Insert to an Input Strip:<br />
1. Create a new strip from a physical source such as I/O Card In L.<br />
Main Output Bus<br />
Recording<br />
Software<br />
(playback)<br />
Aux 1 Bus<br />
Aux 2 Bus<br />
Pan and Volume are also controlled by your recording application via the Direct Monitor Send.<br />
These controls come before the volume and pan controls in the channel strip.<br />
2. Next, right-click on the insert chain and select the Insert ASIO Direct Monitor<br />
option.<br />
3. Choose an available ASIO Input and Output pair. Normally, you should use the<br />
same ASIO pair for the input and output.<br />
4. The I/O Card In L input should now be available to record in your ASIO application.<br />
5. In Cubasis, ASIO Direct Monitor needs to be On (checked). (Options, Audio<br />
Setup, System.)<br />
6. In Cubasis, the VST Channel Mixer input channel must be routed to a Master Mixer<br />
Bus and the output of this Bus must be routed to the PatchMix input strip<br />
containing the ASIO Direct Monitor send. This routing is shown in the diagram on<br />
the following page.<br />
f If the Direct Monitor<br />
Send/Return comes after<br />
an effect, the effect will<br />
be recorded. See<br />
Recording & Monitoring<br />
with Effects.<br />
60 <strong>Creative</strong> Professional