Optoelectronic semiconductor - PCR Library
Optoelectronic semiconductor - PCR Library Optoelectronic semiconductor - PCR Library
14. References The EPD shall make reference to the following documents: - EPD General Program Instructions, Version 1.0 (2008-02-29), The International EPD Cooperation, downloadable from http://www.environdec.com/. - EPD Requirements, MSR 1999:2, downloadable from http://www.environdec.com/. - Relevant PCR documents; - The underlying LCA report. When available, the following documents shall also be referenced: - Other documents and recycling instructions which verify and complement the EPD.
Appendix I – Generic Data Sources to Refer to For processes located within Taiwan, Taiwan generic data or the data published by the commercial, industrial and energy competent authorities of the Republic of China (ROC) government, may be used. However, for other regions (such as EU), if there are more relevant generic data available, these data should be used instead. When data from the following generic databases are used, the most current and updated data should be used: Material Database Published Steel, Primary copper, Copper products, Electricity, Fuels, Aluminium, Chemicals, Transports, Waste management, Plastics Electronic components PE-GaBi 2006 ELCD version 2.0 2009 Ecoinvent 2 nd edition 2007 The Boustead Model 5.0 2007 EIME (Environmental Information and Management Explorer) EcoBilan PE Plastics Europe (Association of Plastics Manufacturers in Europe) 1998-2000 1993-1998 PE-GaBi 2006 ELCD 2009 Ecoinvent 2 nd edition 2007 The Boustead Model 5.0 2007 EIME (Environmental Information and Management Explorer) EcoBilan 1998-2000 PE-GaBi 2006 ELCD 2009 Ecoinvent 2 nd edition 2007 The Boustead Model 5.0 2007 EIME (Environmental Information and Management Explorer) EcoBilan 1998-2000
- Page 1 and 2: Product-Category Rules (PCR) for pr
- Page 3 and 4: 1. General Information This documen
- Page 5 and 6: The product’s electronic and opti
- Page 7 and 8: Manufacturing Phase The LCA shall i
- Page 9 and 10: - Multi-output: The allocations are
- Page 11 and 12: - For the definition of hazardous w
- Page 13: 13. Information about the certifica
- Page 17 and 18: - relevant PCR documents - EPD Requ
- Page 19 and 20: The schematic for the optoelectroni
- Page 21 and 22: Optical Encapsulant (Liquid Compoun
- Page 23: (4) Photocoupler 1: Black epoxy res
Appendix I – Generic Data Sources to Refer to<br />
For processes located within Taiwan, Taiwan generic data or the data published by the<br />
commercial, industrial and energy competent authorities of the Republic of China (ROC)<br />
government, may be used. However, for other regions (such as EU), if there are more relevant<br />
generic data available, these data should be used instead.<br />
When data from the following generic databases are used, the most current and updated data<br />
should be used:<br />
Material Database Published<br />
Steel, Primary copper,<br />
Copper<br />
products, Electricity,<br />
Fuels,<br />
Aluminium,<br />
Chemicals,<br />
Transports, Waste<br />
management,<br />
Plastics<br />
Electronic<br />
components<br />
PE-GaBi 2006<br />
ELCD version 2.0 2009<br />
Ecoinvent 2 nd edition 2007<br />
The Boustead Model 5.0 2007<br />
EIME (Environmental Information and<br />
Management Explorer) EcoBilan<br />
PE Plastics Europe (Association of Plastics<br />
Manufacturers in Europe)<br />
1998-2000<br />
1993-1998<br />
PE-GaBi 2006<br />
ELCD 2009<br />
Ecoinvent 2 nd edition 2007<br />
The Boustead Model 5.0 2007<br />
EIME (Environmental Information and<br />
Management Explorer) EcoBilan<br />
1998-2000<br />
PE-GaBi 2006<br />
ELCD 2009<br />
Ecoinvent 2 nd edition 2007<br />
The Boustead Model 5.0 2007<br />
EIME (Environmental Information and<br />
Management Explorer) EcoBilan<br />
1998-2000
Change language