Disposable sensors that last - Philips

Disposable sensors that last
Durable and cost effective single patient use SpO 2 sensors
Philips family of single-patient use SpO2 sensors provides continuous, non-invasive
measurement of arterial oxygen saturation.
You can choose between our Adult-Pediatric
sensor to measure a wide range of patients or
our wrap sensors that are optimally designed
for the infant or neonate.
In addition, these sensors are optimized for
Philips FAST-SpO technology, providing you
2
additional benefits such as reduced sensitivity
to patient movement and other artifacts.
When your goal is superb patient care,
there’s no better choice than Philips.
Philips family of disposable sensors
• Cost-effective. Philips Disposables offer a
cost-effective solution and when combined
with reusable sensors, can help to lower
your total cost of SpO monitoring.
2
• Quality. Philips meets a wide range of
standards that have been set by regulatory
authorities and standardization committees
(e.g. FDA, IEC, ISO), plus Philips own
internal standards to achieve high levels of
quality and safety.
• Compatible. Tested and qualified
for Philips, legacy HP and Agilent, and
validated Nellcor ® and GE monitors.
• Convenient. 20 sensors per box.

Three sensors for a wide range of patient sizes
M1131A (Adult/Pediatric)
• Versatile. One sensor fits pediatric to
large adult patients.
• Simple to use. Light ergonomically
shaped sensor slips easily onto a patient’s
finger and is easy to reposition as needed.
• Reliable. Pre-aligned LED sensor provides
fast, reliable readings you can count on to
make informed clinical decisions.
• Long lasting. Designed to perform for
a single patient’s average hospital stay.
M1132A and M1133A
(Infant and Neonate)
• Comfortable. Minimal adhesive is
optimized to reduce irritation when
skin sensitivity is a concern.
• Accurate. Sensor design prevents ambient
light for reliable readings.
• Durable and cost effective.
Ruggedly designed to outlast typical adhesive
sensors.
© 2008 Koninklijke Philips Electronics N.V.
All rights are reserved.
M1131A (Adult/Pediatric Sensor)
• Patient size: greater than 20kg (44 lb)
• Application: any finger (except thumb)
M1132A (Infant Sensor)
• Patient size: 3-10kg (6.6-22 lb)
• Application: any finger or toe
M1133A (Neonatal/Infant/Adult
Sensor)
• Patient size: 40kg (>88 lb)
Application: finger
* Pulse oximetry measurements are statistically distributed. Two-thirds of all pulse oximetry measurements can be expected to fall within the stated accuracy.
When sensors are used on neonatal subjects as recommended, the literature predicts the accuracy range should be increased by +/-1% to account for affect
on oximeter measurements due to fetal hemoglobin in neonatal blood.
Philips Medical Systems Nederland B.V. reserves the right to make changes
in specifications and/or to discontinue any product at any time without
notice or obligation and will not be liable for any consequences resulting
from the use of this publication.
Philips Healthcare is part of Royal Philips Electronics
www.medical.philips.com
medical@philips.com
fax: +31 40 27 64 887
Specifications
Physical
M1131A:
Cable length: 45.0 cm (18”)
M1132A, M1133A:
Cable length: 90.0 cm (35”)
Temperature range
Operating: 10 to 37°C
(50 to 98.6°F)
Humidity
Operating: 95% RH max at
37°C (98.6°F)
SpO 2 accuracy*
Accuracy with compatible
Philips (Agilent/Hewlett-Packard)
and Nellcor monitors: (N-200,
N-395, N3000 N-20 PA, NPB-40)
and GE Dinamap Pro 400V1.
M1131A:
RMS = ±3% (70 to 100%)
M1132A, M1133A:
RMS = ±2% (70 to 100%)
Printed in The Netherlands
4522 962 37351 *NOV 2008
Philips Healthcare
Global Information Center
P.O. Box 1286
5602 BG Eindhoven
The Netherlands