You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Catálogo de productos<br />
Generado por<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong><br />
S.A.<br />
marychen1987@hotmail.com<br />
+86-51985138166
Catálogo generado por www.solostocks.com<br />
Página 2 de 56<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166<br />
Equipos completos
Catálogo generado por www.solostocks.com<br />
Página 3 de 56<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166<br />
3PCS Nema 34 motores paso a paso 1232 oz.in<br />
bipolar 4wiresCNC<br />
Precio<br />
Pedido mínimo<br />
A convenir<br />
1 Unidad<br />
Información detallada del producto:<br />
Este item incluye los siguientes:<br />
Nema 34 stepper motor: Part No.: 34HS1456<br />
Frame Size: NEMA34 Step Angle: 1.8 degree<br />
Voltage: 3.08V Current: 5.6A/phase Resistance:<br />
0.55 Ohm/phase Inductance: 5.5 mH/phase<br />
Holding torque: 8.4N.m 1200oz-in Rotor inertia:<br />
2700g-cm2 Number of wire leads: 4 Weight: 3.8<br />
kg Length: 118mm BLUE B- RED A+ GREEN A-<br />
YELLOW B+ The shaft of the stepper motor is<br />
14MM,the length of the shaft is 37MM.
Catálogo generado por www.solostocks.com<br />
Página 4 de 56<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166<br />
4 Axis Nema 23 Stepper <strong>Motor</strong> 270oz-in ,3A 4<br />
leads & Driver CNC Kit<br />
Precio<br />
Pedido mínimo<br />
A convenir<br />
1 Unidad<br />
Información detallada del producto:<br />
este juego incluye los siguientes: 4<br />
PCS Nema 23 stepper motor with 270 oz.in<br />
biopolar 4leads 1 PC Four-axis driver board,<br />
3.5A, 16 micsteps 1 PC Power Supply 350Watts<br />
(24VDC/14.6A) Detailed information Model<br />
42HS5460 Step angel ( ¡ã ) 1.8 <strong>Motor</strong> Length<br />
L(mm) 78 Rate Voltage(V) 3 Rate Current (A) 3<br />
Phase Resistance ( ¦¸ )1 Phase Inductance (mH)<br />
13.5 Holding Torque (oz.in) 270 Lead Wire<br />
(NO.)4 Rotor Inertia (kg. c?)0.68 <strong>Motor</strong> Weight<br />
(kg)1 M¨¢s productos, m¨¢s descuentos.
Catálogo generado por www.solostocks.com<br />
Página 5 de 56<br />
Herramientas<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166
Catálogo generado por www.solostocks.com<br />
Página 6 de 56<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166<br />
3Axis Nema 34 motor paso a paso 1600oz-in<br />
3.5A CNC Router or Mill <strong>Longs</strong> <strong>Motor</strong><br />
Precio<br />
Pedido mínimo<br />
Información detallada del producto:<br />
3Axis Nema 34 Stepper <strong>Motor</strong> 1600oz-in<br />
3.5A CNC Router or Mill <strong>Longs</strong> <strong>Motor</strong><br />
What's in Box? 3 PCS Nema 34 Stepper<br />
<strong>Motor</strong> with Single shaft 1600oz-in holding<br />
torque, 3 PCS Stepper Driver DM860A<br />
with 7.8A replacing MD882, 3 PCS Power<br />
Supplies for 200W,60VDC, 1 PC Breakout<br />
Board, 1 PC DB25 Cable Moreover,we<br />
are looking for distributors in the world,if you<br />
are intrrested in our programme,please contact<br />
345,00 EUR /<br />
Unidad<br />
1 Unidad<br />
(I.V.A y portes no incluidos)
Catálogo generado por www.solostocks.com<br />
Página 7 de 56<br />
us!Let's grow together!!! Detailed<br />
information : 1. Nema 34 stepper<br />
motor:34HS5434C-37B2 Model Step angel (1.8 °<br />
) <strong>Motor</strong> Length L(151mm) Rate Voltage(5.7V) Rate<br />
Current (3.5A) Phase Resistance (1.9 Ω<br />
) Phase Inductance(22mH) Holding Torque<br />
(1600oz.in) Lead Wire (4 ,NO.) Rotor Inertia<br />
.(3.6kg. c?) <strong>Motor</strong> Weight (5kg) 2. Stepper<br />
motor driver DM860A: Introduction: DM860A<br />
is a type of two-phase hybrid stepping motor<br />
driver, The drive voltage of which is from 24VDC<br />
to 80VDC. It is designed for use with 2-phase<br />
hybrid stepper motor of all kinds with 57mm to<br />
110mm outside diameter and less than 8.0A phase<br />
current. This circuit that it adopts is similar<br />
to the circuit of servo control which enables<br />
the motor run smoothly almost without noise and<br />
vibration. Hording torque when DM860A run under<br />
high speed is also significantly higher than the<br />
other two-phase driver, what#s more, the<br />
positioning accuracy is also higher. It is<br />
widely used in middle and big size numerical<br />
control devices such as curving machine, CNC<br />
machine, and computer embroider machine, packing<br />
machines and so on. Features: l High<br />
performance, low price l Average<br />
current control, 2-phase sinusoidal output<br />
current drive l Supply voltage from<br />
24VDC to 80VDC l Opto-isolated signal<br />
I/O l Overvoltage, under voltage,<br />
overcorrect, phase short circuit protection l<br />
14 channels subdivision and automatic<br />
idle-current reduction l 8 channels<br />
output phase current setting l Offline<br />
command input terminal l <strong>Motor</strong> torque<br />
is related with speed, but not related with<br />
step/revolution l High start speed l<br />
High hording torque under high speed 3.<br />
Power Supply: The power is 200W, the output<br />
voltage is 60VDC. 4. Breakout Board: Built<br />
in DB25 male connector. Power supply: +5V DC.<br />
Built in C-class Optical-coupler. High quality<br />
with Surface-mount Tech.<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166
Catálogo generado por www.solostocks.com<br />
Página 8 de 56<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166<br />
3Axis Nema 34 Stepper <strong>Motor</strong> 1600oz-in 3.5A<br />
CNC Router or Mill <strong>Longs</strong> <strong>Motor</strong><br />
Precio<br />
Pedido mínimo<br />
Información detallada del producto:<br />
279,00 EUR /<br />
Unidad<br />
1 Unidad<br />
What's in Box? 3 PCS Nema<br />
34 Stepper <strong>Motor</strong> with Single shaft 1600oz-in<br />
holding torque, 3 PCS Stepper Driver<br />
DM860A with 7.8A replacing MD882, 3 PCS<br />
Power Supplies for 200W,60VDC, 1 PC<br />
Breakout Board, 1 PC DB25 Cable<br />
Detailed information : 1. Nema 34 stepper<br />
motor: Model Step angel (1.8 ° ) <strong>Motor</strong> Length<br />
L(151mm) Rate Voltage(5.7V) Rate Current (3.5A)<br />
Phase Resistance (1.9 Ω ) Phase<br />
(I.V.A y portes no incluidos)
Catálogo generado por www.solostocks.com<br />
Página 9 de 56<br />
Inductance(22mH) Holding Torque (1600oz.in) Lead<br />
Wire (4 ,NO.) Rotor Inertia .(3.6kg. c?) <strong>Motor</strong><br />
Weight (5kg) 34HS5435C-37B2 2.Stepper motor<br />
driver 3.3. Power Supply: The power is<br />
200W, the output voltage is 60VDC. 4.<br />
Breakout Board:<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166
Catálogo generado por www.solostocks.com<br />
Página 10 de 56<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166<br />
3Axis Nema 42 motor paso a paso 4120oz-in<br />
CNC Router &Mill<br />
Precio<br />
Pedido mínimo<br />
Información detallada del producto:<br />
3Axis Nema 42 Stepper <strong>Motor</strong> 4120oz-in<br />
CNC Router &Mill Que hay en el embalaje?<br />
3 pcs Nema 42 stepper motor with 4120 oz.in, 4<br />
leads 3 pcs Stepper motor driver DQ2722M,<br />
110-220VAC ,7A 1 pc Breakout board & 1 pc<br />
Parallel cable free offering when you bought<br />
above. So you can make a successful CNC kit.<br />
Detailed information: 1, stepper motor<br />
Technical Specifications Part No.:<br />
42HS6480 Frame Size: NEMA42<br />
840,00 EUR /<br />
Unidad<br />
1 Unidad<br />
(I.V.A y portes no incluidos)
Catálogo generado por www.solostocks.com<br />
Página 11 de 56<br />
Step Angle: 1.8 degree<br />
Voltage: 5.86VDC<br />
Current: 8.0 A/phase<br />
Resistance: 0.67Ohm/phase<br />
Inductance: 12mH/phase<br />
Holding torque: 300Kg-cm<br />
4120oz-in Rotor inertia: 1620<br />
g-cm2 Number of wire leads: 4 Weight:<br />
11.7kg Length: 201mm<br />
Single Shaft! 2, stepper motor driver:DQ2722M<br />
FEATURES l High performance, low<br />
price l 16 channels constant angle,<br />
constant torque micro steps, highest micro step:<br />
60000ppr l Highest response<br />
frequency: 200Kpps l Current of<br />
winding will be reduced by approximately 50%<br />
when no step pulse command is received for 0.1<br />
second l Opto-isolated signal I/O<br />
l Drive current is adjustable in 16<br />
channels from 1.2A/phase to 7.0A/phase l<br />
Single power supply from 110V to 220VAC l<br />
Phase terminal memory function (motor phase<br />
terminal is memorized after input pulse train<br />
stopping 5s and it is recovered when stepper<br />
driver power on or signal MF changes from low<br />
level to high level) 3. Breakout board: Built<br />
in DB25 male connector. Power supply: +5V DC.<br />
Built in C-class Optical-coupler. High quality<br />
with Surface-mount Tech.<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166
Catálogo generado por www.solostocks.com<br />
Página 12 de 56<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166<br />
4 Axis Nema 34 stepper motor 878oz.in CNC<br />
Router/Mill<br />
Precio<br />
Pedido mínimo<br />
Información detallada del producto:<br />
305,00 EUR /<br />
Unidad<br />
1 Unidad<br />
What's in Box? 4 pcs Nema<br />
34 stepper motor 878oz.in bipolar 4 pcs<br />
Driver DM860A 1 pc Power Supply 350Watts 1 PC<br />
Driver Board 1 pc Parrallel Cable Detailed<br />
information: 1. Nema 34 stepper<br />
motor:34HST9805-37B2 Model Step angel (1.8 ° )<br />
<strong>Motor</strong> Length L(98mm) Rate Voltage (6.4V) Rate<br />
Current (2A) Phase Resistance ( 3.2Ω )<br />
Phase Inductance (15mH) Holding Torque<br />
(878oz.in) Lead Wire (8NO.) Rotor Inertia<br />
(I.V.A y portes no incluidos)
Catálogo generado por www.solostocks.com<br />
Página 13 de 56<br />
(1.7kg. c?) <strong>Motor</strong> Weight (3kg) 2. Driver<br />
:DM860A DM860A is a type of two-phase hybrid<br />
stepping motor driver, The drive voltage of<br />
which is from 24VDC to 80VDC. It is designed for<br />
use with 2-phase hybrid stepper motor of all<br />
kinds with 57mm to 110mm outside diameter and<br />
less than 8.0A phase current. This circuit that<br />
it adopts is similar to the circuit of servo<br />
control which enables the motor run smoothly<br />
almost without noise and vibration. Hording<br />
torque when DM860A run under high speed is also<br />
significantly higher than the other two-phase<br />
driver, what#s more, the positioning accuracy is<br />
also higher. It is widely used in middle and big<br />
size numerical control devices such as curving<br />
machine, CNC machine, and computer embroider<br />
machine, packing machines and so on.<br />
3.Power Supply The power is 350Watts, and the<br />
output voltage is 24VDC. 4.Breakout Board: #<br />
Built in DB25 male connector. # Power supply:<br />
+5V DC. # Built in C-class Optical-coupler. #<br />
High quality with Surface-mount Tech.<br />
Whats more, our products are mainly used in CNC<br />
machine, Carver machine, Automazation, Printer,<br />
Stage lighting and so on. If you have any<br />
questions about our products, please dont<br />
hesitate to contact me. And I will try my best<br />
to support you. And we are looking for<br />
distributors in the world,if you are intrested<br />
in our programme,please contact us!Let's<br />
grow together!<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166
Catálogo generado por www.solostocks.com<br />
Página 14 de 56<br />
Industria<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166
Catálogo generado por www.solostocks.com<br />
Página 15 de 56<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166<br />
Nema 23 Stepper <strong>Motor</strong> 270oz-in CNC Kit/Mill<br />
Precio<br />
Pedido mínimo<br />
Información detallada del producto:<br />
147,00 EUR /<br />
Unidad<br />
1 Unidad<br />
Nema 23 Stepper <strong>Motor</strong> 270oz-in,3A<br />
CNC Kit/Mill NEW Qué hay en la caja? #3 pcs<br />
Nema 23 stepper motor 270 oz.in,3A, bioplar #3<br />
pcs stepper motor driver DM542A, peak 4.2A, 128<br />
micsteps, replacing M542 #1 pc Power Supply<br />
350Watts( 24VDC/14.6A) #1 pc parallel cable<br />
& CD( mach3) free offering when you bought<br />
above Caracteristicas Mecanicas 1.motor paso a<br />
paso :23HS8630 Model Step angel (1.8 ° ) <strong>Motor</strong><br />
Length L(78mm) Rate Voltage(3V) Rate Current<br />
(3A) Phase Resistance (1.0Ω ) Phase<br />
(I.V.A y portes no incluidos)
Catálogo generado por www.solostocks.com<br />
Página 16 de 56<br />
Inductance(1.6mH) Holding Torque (270oz.in) Lead<br />
Wire (6 ,NO.) Rotor Inertia .(480kg. c?) <strong>Motor</strong><br />
Weight (1kg) # # 2.Driver con microstepping<br />
para motor paso a paso: # 1.Driver:DM542A<br />
DM542A is a type of two-phase hybrid stepping<br />
motor driver, The drive voltage of which is from<br />
18VDC to 50VDC. It is designed for use with<br />
2-phase hybrid stepper motor of all kinds with<br />
42mm to 86mm outside diameter and less than 4.0A<br />
phase current. This circuit that it adopts is<br />
smiliar to the circuit of servo control which<br />
enables the motor run smoothly almost without<br />
noise and vibration. Hording torque when DM542A<br />
run under high speed is also significantly<br />
higher than the other two-phase driver, what#s<br />
more, the positioning accuracy is also higher.<br />
It is widely used in middle and big size<br />
numerical control devices such as curving<br />
machine, CNC machine, and computer embroider<br />
machine, packing machines and so on. Features:<br />
High performance, low price Average current<br />
control, 2-phase sinusoidal output current drive<br />
Supply voltage from 18VDC to 50VDC<br />
Opto-isolated signal I/O Overvoltage, under<br />
voltage, overcorrect, phase short circuit<br />
protection 15 channels subdivision and<br />
automatic idle-current reduction 8 channels<br />
output phase current setting Offline command<br />
input terminal <strong>Motor</strong> torque is relased with<br />
speed, but not related with step/revolution<br />
High start speed High hording torque under<br />
high speed 3.Fuente de Alimentacion 350W-24V<br />
4.3. Breakout board: Description:. # Power<br />
supply: +5V DC. # Built in C-class<br />
Optical-coupler. # High quality with<br />
Surface-mount Tech. Estamos buscando<br />
distribuidores en todo el mundo. si usted está<br />
interesado, no duda en ponerse en contactarme.<br />
!!!Más productos, más descuentos!!!<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166
Catálogo generado por www.solostocks.com<br />
Página 17 de 56<br />
Otros<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166
Catálogo generado por www.solostocks.com<br />
Página 18 de 56<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166<br />
3Axis Nema 34 Stepper <strong>Motor</strong> 1600oz-in 3.5A<br />
CNC Router or Mill <strong>Longs</strong> <strong>Motor</strong><br />
Precio<br />
Pedido mínimo<br />
Información detallada del producto:<br />
348,00 EUR /<br />
Unidad<br />
1 Unidad<br />
Qué hay en la caja? 3 PCS Nema 34<br />
Stepper <strong>Motor</strong> with Single shaft 1600oz-in<br />
holding torque, 3 PCS Stepper Driver DM860A<br />
with 7.8A replacing MD882, 3 PCS Power Supplies<br />
for 200W,60VDC, 1 PC Breakout Board, 1 PC DB25<br />
Cable Datos técnicos: 1. Nema 34 stepper<br />
motor: 34HS5435C-37B2 Model Step angel (1.8 °<br />
) <strong>Motor</strong> Length L(151mm) Rate Voltage(5.7V) Rate<br />
Current (3.5A) Phase Resistance (1.9 Ω<br />
) Phase Inductance(22mH) Holding Torque<br />
(I.V.A y portes no incluidos)
Catálogo generado por www.solostocks.com<br />
Página 19 de 56<br />
(1600oz.in) Lead Wire (4 ,NO.) Rotor Inertia<br />
.(3.6kg. c?) <strong>Motor</strong> Weight (5kg) 2.DM860A<br />
Features: l High performance, low price l<br />
Average current control, 2-phase sinusoidal<br />
output current drive l Supply voltage from<br />
24VDC to 80VDC l Opto-isolated signal I/O l<br />
Overvoltage, under voltage, overcorrect, phase<br />
short circuit protection l 14 channels<br />
subdivision and automatic idle-current reduction<br />
l 8 channels output phase current setting l<br />
Offline command input terminal l <strong>Motor</strong> torque<br />
is related with speed, but not related with<br />
step/revolution l High start speed l High<br />
hording torque under high speed 3.3. Power<br />
Supply: The power is 200W, the output voltage<br />
is 60VDC. 4. Breakout Board: Power supply: +5V<br />
DC. Built in C-class Optical-coupler. High<br />
quality with Surface-mount Tech. More<br />
quatities, More discounts!!<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166
Catálogo generado por www.solostocks.com<br />
Página 20 de 56<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166<br />
3Axis Nema 34 Stepper <strong>Motor</strong> 1600oz-in 3.5A<br />
CNC Router or Mill <strong>Longs</strong> <strong>Motor</strong><br />
Precio<br />
Pedido mínimo<br />
Información detallada del producto:<br />
3Axis Nema 34 Stepper <strong>Motor</strong> 1600oz-in<br />
3.5A CNC Router or Mill <strong>Longs</strong> <strong>Motor</strong><br />
What's in Box? 3 PCS Nema 34 Stepper<br />
<strong>Motor</strong> with Single shaft 1600oz-in holding<br />
torque, 3 PCS Stepper Driver DM860A<br />
with 7.8A replacing MD882, 3 PCS Power<br />
Supplies for 200W,60VDC, 1 PC Breakout<br />
Board, 1 PC DB25 Cable Moreover,we<br />
are looking for distributors in the world,if you<br />
are intrrested in our programme,please contact<br />
340,00 EUR /<br />
Unidad<br />
1 Unidad<br />
(I.V.A y portes no incluidos)
Catálogo generado por www.solostocks.com<br />
Página 21 de 56<br />
us!Let's grow together!!! Detailed<br />
information : 1. Nema 34 stepper<br />
motor:34HS5435C-37B2 Model Step angel (1.8 °<br />
) <strong>Motor</strong> Length L(151mm) Rate Voltage(5.7V) Rate<br />
Current (3.5A) Phase Resistance (1.9 Ω<br />
) Phase Inductance(22mH) Holding Torque<br />
(1600oz.in) Lead Wire (4 ,NO.) Rotor Inertia<br />
.(3.6kg. c?) <strong>Motor</strong> Weight (5kg) 2.Stepper del<br />
controlador del motor: Foto detallada:<br />
Especificaciones técnicas: 1. Controlador de<br />
motor paso a paso DM860A: Introducción:<br />
DM860A es un tipo de conductor en dos fases del<br />
motor híbrido de paso a paso, la tensión de la<br />
unidad de la cual es de 24 V CC a 80VDC. Se ha<br />
diseñado para su uso con híbrido de motor paso a<br />
paso 2-fase de todo tipo con 57mm a 110mm de<br />
diámetro exterior y menos de 8.0A corriente de<br />
fase. Este circuito que adopta es similar al<br />
circuito de servo control que permite que el<br />
motor funcione suavemente casi sin ruido y las<br />
vibraciones.Es ampliamente utilizado en<br />
dispositivos de tamaño medio y grande de control<br />
numérico, tales como máquina curvado, máquina<br />
CNC, y la máquina bordar ordenador, máquinas de<br />
embalaje y así sucesivamente. 3. Fuente de<br />
alimentación: La potencia es de 200W, la<br />
tensión de salida es 60 VCC. 4. Breakout<br />
Board: Construido en el conector DB25 macho.<br />
Fuente de alimentación: 5 V DC. Construido en<br />
el C-Clase óptica del acoplador. De alta<br />
calidad con tecnología de montaje en superficie.<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166
Catálogo generado por www.solostocks.com<br />
Página 22 de 56<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166<br />
3Axis Nema 42 Stepper <strong>Motor</strong> 4120oz-in CNC<br />
Router &Mill<br />
Precio<br />
Pedido mínimo<br />
Información detallada del producto:<br />
778,00 EUR /<br />
Unidad<br />
1 Unidad<br />
3Axis Nema 42 Stepper <strong>Motor</strong> 4120oz-in<br />
CNC Router &Mill Qué hay en la caja?<br />
Detailed information: 1, stepper motor<br />
Technical Specifications Part No.: 42HS6480<br />
Frame Size: NEMA42 Step Angle: 1.8 degree<br />
Voltage: 5.86VDC Current: 8.0 A/phase<br />
Resistance: 0.67Ohm/phase Inductance:<br />
12mH/phase Holding torque: 300Kg-cm 4120oz-in<br />
Rotor inertia: 1620 g-cm2 Number of wire leads:<br />
4 Weight: 11.7kg Length: 201mm Single Shaft!<br />
(I.V.A y portes no incluidos)
Catálogo generado por www.solostocks.com<br />
Página 23 de 56<br />
2. stepper motor driver:DQ2722M FEATURES l<br />
High performance, low price l 16 channels<br />
constant angle, constant torque micro steps,<br />
highest micro step: 60000ppr l Highest response<br />
frequency: 200Kpps l Current of winding will be<br />
reduced by approximately 50% when no step pulse<br />
command is received for 0.1 second l<br />
Opto-isolated signal I/O l Drive current is<br />
adjustable in 16 channels from 1.2A/phase to<br />
7.0A/phase l Single power supply from 110V to<br />
220VAC l Phase terminal memory function (motor<br />
phase terminal is memorized after input pulse<br />
train stopping 5s and it is recovered when<br />
stepper driver power on or signal MF changes<br />
from low level to high level) 3. Breakout board:<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166
Catálogo generado por www.solostocks.com<br />
Página 24 de 56<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166<br />
4 Axis Nema 23 Stepper <strong>Motor</strong> 287oz-in & Driver<br />
CNC Kit<br />
Precio<br />
Pedido mínimo<br />
Información detallada del producto:<br />
160,00 EUR /<br />
Unidad<br />
1 Unidad<br />
4 Axis Nema 23 Stepper <strong>Motor</strong> 287oz-in<br />
& Driver CNC Kit <strong>Longs</strong> <strong>Motor</strong> ¿Qué hay en la<br />
caja? # 4 pcs Nema 23 stepper motor with 425<br />
oz.in # 4 pcs stepper motor driver DM542A,<br />
peak 4.2A, 128 micsteps, replacing M542 # 1 pc<br />
Breakout board & 1 pc Parallel cable . 1<br />
PC Power Supply 200Watts (24VDC/8.3A)<br />
CARACTERISTICAS MECANICAS 1.Brida: Standard<br />
Nema 23HS8610 Model Step angel (1.8 ° ) <strong>Motor</strong><br />
Length L(78mm) Rate Voltage(8.6V) Rate Current<br />
(1.0A) Phase Resistance (8.6Ω ) Phase<br />
Inductance(18mH) Holding Torque (287oz.in) Lead<br />
Wire (46,NO.) Rotor Inertia .(480kg. c?) <strong>Motor</strong><br />
Weight (1kg) # 2.Driver con microstepping<br />
para motor paso a paso:DM542A DM542A is a type<br />
of two-phase hybrid stepping motor driver, The<br />
drive voltage of which is from 18VDC to 50VDC.<br />
It is designed for use with 2-phase hybrid<br />
stepper motor of all kinds with 42mm to 86mm<br />
outside diameter and less than 4.0A phase<br />
current. This circuit that it adopts is smiliar<br />
to the circuit of servo control which enables<br />
the motor run smoothly almost without noise and<br />
vibration. Hording torque when DM542A run under<br />
high speed is also significantly higher than the<br />
other two-phase driver, what#s more, the<br />
positioning accuracy is also higher. It is<br />
widely used in middle and big size numerical<br />
control devices such as curving machine, CNC<br />
machine, and computer embroider machine, packing<br />
machines and so on. Features: High<br />
performance, low price Average current<br />
(I.V.A y portes no incluidos)
Catálogo generado por www.solostocks.com<br />
Página 25 de 56<br />
control, 2-phase sinusoidal output current drive<br />
Supply voltage from 18VDC to 50VDC<br />
Opto-isolated signal I/O Overvoltage, under<br />
voltage, overcorrect, phase short circuit<br />
protection 15 channels subdivision and<br />
automatic idle-current reduction 8 channels<br />
output phase current setting Offline command<br />
input terminal <strong>Motor</strong> torque is relased with<br />
speed, but not related with step/revolution<br />
High start speed High hording torque under<br />
high speed 3.Fuente d alimentación 200W-24V<br />
4. Breakout board: Description: # Built in<br />
C-class Optical-coupler. # High quality with<br />
Surface-mount Tech<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166
Catálogo generado por www.solostocks.com<br />
Página 26 de 56<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166<br />
Nema 42 Stepper <strong>Motor</strong> of 4120oz-in+1 Driver 8A<br />
CNC Mill<br />
Precio<br />
Pedido mínimo<br />
Información detallada del producto:<br />
291,00 EUR /<br />
Unidad<br />
1 Unidad<br />
Nema 42 Stepper <strong>Motor</strong> of 4120oz-in+1<br />
Driver 8A CNC Mill Qué hay en la caja? 1 pc<br />
Nema 42 stepper motor with 4120 oz.in, 4 leads<br />
1 pc Stepper motor driver DQ2722M , 110-220 VAC,<br />
Peak 8 A, rated 7A 1 pc Breakout board & 1<br />
pc Parallel cable free offering when you bought<br />
above. So you can make a successful CNC kit.<br />
Detailed information: 1, stepper motor<br />
Technical Specifications Part No.: 42HS6480<br />
Frame Size: NEMA42 Step Angle: 1.8 degree<br />
(I.V.A y portes no incluidos)
Catálogo generado por www.solostocks.com<br />
Página 27 de 56<br />
Voltage: 5.86VDC Current: 8.0 A/phase<br />
Resistance: 0.67Ohm/phase Inductance:<br />
12mH/phase Holding torque: 300Kg-cm 4120oz-in<br />
Rotor inertia: 1620 g-cm2 Number of wire leads:<br />
4 Weight: 11.7kg Length: 201mm Single Shaft!<br />
2, stepper motor driver:DQ2722M FEATURES l<br />
High performance, low price l 16 channels<br />
constant angle, constant torque micro steps,<br />
highest micro step: 60000ppr l Highest response<br />
frequency: 200Kpps l Current of winding will be<br />
reduced by approximately 50% when no step pulse<br />
command is received for 0.1 second l<br />
Opto-isolated signal I/O l Drive current is<br />
adjustable in 16 channels from 1.2A/phase to<br />
7.0A/phase l Single power supply from 110V to<br />
220VAC l Phase terminal memory function (motor<br />
phase terminal is memorized after input pulse<br />
train stopping 5s and it is recovered when<br />
stepper driver power on or signal MF changes<br />
from low level to high level) 3. Breakout board:<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166
Catálogo generado por www.solostocks.com<br />
Página 28 de 56<br />
Otros<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166
Catálogo generado por www.solostocks.com<br />
Página 29 de 56<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166<br />
3Axis Nema 42 Stepper <strong>Motor</strong> 4120oz-in CNC<br />
Router &Mill<br />
Precio<br />
Pedido mínimo<br />
Información detallada del producto:<br />
3Axis Nema 42 Stepper <strong>Motor</strong> 4120oz-in<br />
CNC Router &Mill Qué hay en la caja? 3<br />
pcs Nema 42 stepper motor with 4120 oz.in, 4<br />
leads 3 pcs Stepper motor driver DQ2722M,<br />
110-220VAC ,7A 1 pc Breakout board & 1 pc<br />
Parallel cable free offering when you bought<br />
above. So you can make a successful CNC kit.<br />
1, stepper motor Technical Specifications<br />
Part No.: 42HS6480<br />
Frame Size: NEMA42 Step<br />
746,00 EUR /<br />
Unidad<br />
1 Unidad<br />
(I.V.A y portes no incluidos)
Catálogo generado por www.solostocks.com<br />
Página 30 de 56<br />
Angle: 1.8 degree Voltage:<br />
5.86VDC Current: 8.0<br />
A/phase Resistance:<br />
0.67Ohm/phase Inductance:<br />
12mH/phase Holding torque: 300Kg-cm<br />
4120oz-in Rotor inertia: 1620<br />
g-cm2 Number of wire leads: 4 Weight:<br />
11.7kg Length: 201mm<br />
Single Shaft! 2, stepper motor driver<br />
FEATURES l High performance, low<br />
price l 16 channels constant angle,<br />
constant torque micro steps, highest micro step:<br />
60000ppr l Highest response<br />
frequency: 200Kpps l Current of<br />
winding will be reduced by approximately 50%<br />
when no step pulse command is received for 0.1<br />
second l Opto-isolated signal I/O<br />
l Drive current is adjustable in 16<br />
channels from 1.2A/phase to 7.0A/phase l<br />
Single power supply from 110V to 220VAC l<br />
Phase terminal memory function (motor phase<br />
terminal is memorized after input pulse train<br />
stopping 5s and it is recovered when stepper<br />
driver power on or signal MF changes from low<br />
level to high level) 3. Breakout board:<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166
Catálogo generado por www.solostocks.com<br />
Página 31 de 56<br />
Otros<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166
Catálogo generado por www.solostocks.com<br />
Página 32 de 56<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166<br />
3 Axis Nema 42 motor paso a paso 3256 oz.in<br />
CNC Mill for Free Shipping<br />
Precio<br />
Pedido mínimo<br />
Información detallada del producto:<br />
935,00 EUR /<br />
Unidad<br />
1 Unidad<br />
DESCRIPTION This item includes:<br />
#3 pcs Nema 42 stepper motor 3256 oz.in bipolar<br />
#3 pcs Stepper motor driver 110-220VAC,7A,<br />
60000ppr #1 pc Breakout Borad Note: This kit<br />
dont need power supply, the reason is that the<br />
input voltage of the stepper motor driver<br />
DQ2722M is 110-220VAC. Detailed information<br />
about this item: Detailed pics of motors<br />
& drivers: 1. Nema 42 stepper motor:<br />
Electrical Specification: Model Step angel (<br />
(I.V.A y portes no incluidos)
Catálogo generado por www.solostocks.com<br />
Página 33 de 56<br />
1.8° ) <strong>Motor</strong> Length L(150mm) Rate Voltage<br />
(4.08V) Rate Current (6.0A) Phase Resistance<br />
(0.8 Ω ) Phase Inductance (14mH)<br />
Holding Torque (3256oz.in) Lead Wire (4NO.)<br />
Rotor Inertia (10.9kg. cm2) <strong>Motor</strong> Weight<br />
(8.4kg) RED A+ GRN A- YEL B+ BLU B-<br />
2. Stepper motor driver: DQ2722M FEATURES l<br />
High performance, low price l 16<br />
channels constant angle, constant torque micro<br />
steps, highest micro step: 60000ppr l<br />
Highest response frequency: 200Kpps l<br />
Current of winding will be reduced by<br />
approximately 50% when no step pulse command is<br />
received for 0.1 second l<br />
Opto-isolated signal I/O l Drive<br />
current is adjustable in 16 channels from<br />
1.2A/phase to 7.0A/phase l Single<br />
power supply from 110V to 220VAC l<br />
Phase terminal memory function (motor phase<br />
terminal is memorized after input pulse train<br />
stopping 5s and it is recovered when stepper<br />
driver power on or signal MF changes from low<br />
level to high level) 3. Breakout board:<br />
Description: #Built in DB25 male connector. .<br />
#Power supply: +5V DC. #Built in C-class<br />
Optical-coupler. #High quality with<br />
Surface-mount Tech.<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166
Catálogo generado por www.solostocks.com<br />
Página 34 de 56<br />
Otros<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166
Catálogo generado por www.solostocks.com<br />
Página 35 de 56<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166<br />
3 Axis Nema 23 stepper motor 287 oz.in 1.0A<br />
CNC Router /Mill NEW<br />
Precio<br />
Pedido mínimo<br />
112,00 EUR / Unidad(I.V.A y portes no incluidos)<br />
1 Unidad<br />
Información detallada del producto:<br />
3 Axis Nema 23 stepper motor 287<br />
oz.in 1.0A CNC Router /Mill NEW Qué hay en la<br />
caja? 3 pcs Nema 23 stepper motor 287 oz.in<br />
bioplar 3 pcs Driver 1 pc Power Supply<br />
200W(24VDC/8.3A) 1 pc parallel cable<br />
CARACTERISTICA MECANICA 1. Nema 23 motor paso a<br />
paso: Model Step angel (1.8 ° ) <strong>Motor</strong> Length<br />
L(78mm) Rate Voltage(8.6V) Rate Current (1A)<br />
Phase Resistance (8.6Ω ) Phase<br />
Inductance(18mH) Holding Torque (287oz.in) Lead
Catálogo generado por www.solostocks.com<br />
Página 36 de 56<br />
Wire (6 ,NO.) Rotor Inertia .(480kg. c?) <strong>Motor</strong><br />
Weight (1kg) 2. motor driver DM542A, 4.2A,<br />
18-50VDC, CNC New Detailed information<br />
introduction: DM542A is a type of two-phase<br />
hybrid stepping motor driver, The drive voltage<br />
of which is from 18VDC to 50VDC. It is designed<br />
for use with 2-phase hybrid stepper motor of all<br />
kinds with 42mm to 86mm outside diameter and<br />
less than 4.0A phase current. This circuit that<br />
it adopts is smiliar to the circuit of servo<br />
control which enables the motor run smoothly<br />
almost without noise and vibration. Hording<br />
torque when DM542A run under high speed is also<br />
significantly higher than the other two-phase<br />
driver, whats more, the positioning accuracy is<br />
also higher. It is widely used in middle and big<br />
size numerical control devices such as curving<br />
machine, CNC machine, computer embroider<br />
machine, packing machines and so on. Features:<br />
l High performance, low price l Average current<br />
control, 2-phase sinusoidal output current drive<br />
l Supply voltage from 18VDC to 50VDC l<br />
Opto-isolated signal I/O l Overvoltage, under<br />
voltage, overcorrect, phase short circuit<br />
protection l 15 channels subdivision and<br />
automatic idle-current reduction l 8 channels<br />
output phase current setting l Offline command<br />
input terminal l <strong>Motor</strong> torque is related with<br />
speed, but not related with step/revolution l<br />
High start speed l High hording torque under<br />
high speed Electrical specification: 3.Fuente<br />
de Alimentación----200W-24VDC The power is<br />
200Watts, and output voltage is 24VDC Más<br />
productos, más descuentos!!!<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166
Catálogo generado por www.solostocks.com<br />
Página 37 de 56<br />
Otros<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166
Catálogo generado por www.solostocks.com<br />
Página 38 de 56<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166<br />
1AXIS Nema 42 Stepper <strong>Motor</strong> 3256ozin CNC<br />
Engrave Control,Mill Cut<br />
Precio<br />
Pedido mínimo<br />
Información detallada del producto:<br />
232,00 EUR /<br />
Unidad<br />
1 Unidad<br />
This item includes: 1pc Nema 42<br />
stepper motor 3256 oz.in bipolar 1pc Stepper<br />
motor driver 110-220VAC,7A, 60000ppr 1 pc<br />
Breakout Borad Note: This kit dont need power<br />
supply, the reason is that the input voltage of<br />
the stepper motor driver DQ2722M is 110-220VAC.<br />
Detailed information about this item: 1. Nema<br />
42 stepper motor: Electrical Specification:<br />
Model 42HS5460 Step angel ( ° ) 1.8 <strong>Motor</strong><br />
Length L(mm) 150 Rate Voltage(V) 5.44 Rate<br />
(I.V.A y portes no incluidos)
Catálogo generado por www.solostocks.com<br />
Página 39 de 56<br />
Current (A) 6.8 Phase Resistance ( Ω<br />
)0.8 Phase Inductance (mH) 15 Holding Torque<br />
(oz.in) 2975 Lead Wire (NO.)4 Rotor Inertia<br />
(kg. c?)10.9 <strong>Motor</strong> Weight (kg)8.4 2. Stepper<br />
motor driver: DQ2722M FEATURES l High<br />
performance, low price l 16 channels constant<br />
angle, constant torque micro steps, highest<br />
micro step: 60000ppr l Highest response<br />
frequency: 200Kpps l Current of winding will be<br />
reduced by approximately 50% when no step pulse<br />
command is received for 0.1 second l<br />
Opto-isolated signal I/O l Drive current is<br />
adjustable in 16 channels from 1.2A/phase to<br />
7.0A/phase l Single power supply from 110V to<br />
220VAC l Phase terminal memory function (motor<br />
phase terminal is memorized after input pulse<br />
train stopping 5s and it is recovered when<br />
stepper driver power on or signal MF changes<br />
from low level to high level) 3. Breakout<br />
board: Description: Power supply: +5V DC.<br />
Built in C-class Optical-coupler. High quality<br />
with Surface-mount Tech.<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166
Catálogo generado por www.solostocks.com<br />
Página 40 de 56<br />
Otros<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166
Catálogo generado por www.solostocks.com<br />
Página 41 de 56<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166<br />
3 Axis Nema 34 stepper motor 878 oz.in CNC<br />
Router/KIT<br />
Precio<br />
Pedido mínimo<br />
Información detallada del producto:<br />
251,00 EUR /<br />
Unidad<br />
1 Unidad<br />
Qué hay en la caja? 3 pcs Nema 34<br />
stepper motor 878 oz.in bipolar 1 pc Driver<br />
DM860A 1 pc Power Supply 350W -24V 1 Breakout<br />
board free offering with cable CARACTERISTICA<br />
MECANICA 1.Nema 34 stepper motor:<br />
34HSt9805-37B2 Model Step angel (1.8 ° ) <strong>Motor</strong><br />
Length L(98mm) Rate Voltage(6.4V) Rate Current<br />
(2A) Phase Resistance (3.2Ω ) Phase<br />
Inductance(15mH) Holding Torque (872oz.in) Lead<br />
Wire (8 ,NO.) Rotor Inertia .(1.7kg. c?) <strong>Motor</strong><br />
(I.V.A y portes no incluidos)
Catálogo generado por www.solostocks.com<br />
Página 42 de 56<br />
Weight (3kg) 2.Driver:DM860A Introduction:<br />
DM860A is a type of two-phase hybrid stepping<br />
motor driver, The drive voltage of which is from<br />
24VDC to 80VDC. It is designed for use with<br />
2-phase hybrid stepper motor of all kinds with<br />
57mm to 110mm outside diameter and less than<br />
8.0A phase current. This circuit that it adopts<br />
is similar to the circuit of servo control which<br />
enables the motor run smoothly almost without<br />
noise and vibration. Hording torque when DM860A<br />
run under high speed is also significantly<br />
higher than the other two-phase driver, what#s<br />
more, the positioning accuracy is also higher.<br />
It is widely used in middle and big size<br />
numerical control devices such as curving<br />
machine, CNC machine, and computer embroider<br />
machine, packing machines and so on. Features:<br />
l High performance, low price l Average current<br />
control, 2-phase sinusoidal output current drive<br />
l Supply voltage from 24VDC to 80VDC l<br />
Opto-isolated signal I/O l Overvoltage, under<br />
voltage, overcorrect, phase short circuit<br />
protection l 14 channels subdivision and<br />
automatic idle-current reduction l 8 channels<br />
output phase current setting l Offline command<br />
input terminal l <strong>Motor</strong> torque is related with<br />
speed, but not related with step/revolution l<br />
High start speed l High hording torque under<br />
high speed 3.Power Supply The power is 350W,<br />
and the output voltage is 24VDC. 4.Breakout<br />
Board with cable<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166
Catálogo generado por www.solostocks.com<br />
Página 43 de 56<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166<br />
3 pcs NEMA23 2.8Nm CNC motor paso a paso<br />
4.2A ,1.8Degree<br />
Precio<br />
Pedido mínimo<br />
71,00 EUR / Unidad (I.V.A y portes no incluidos)<br />
1 Unidad<br />
Información detallada del producto:<br />
Qué hay en la caja? 3 pcs Nema 23<br />
stepper motor 2.8Nm in bipolar CARACTERICTICA :<br />
1. Nema 23 stepper motor:23HS9442 Model Step<br />
angel (1.8 ° ) <strong>Motor</strong> Length L(112mm) Rate<br />
Voltage(3.78V) Rate Current (4.2A) Phase<br />
Resistance (0.9Ω ) Phase<br />
Inductance(3.8mH) Holding Torque (2.8N.M) Lead<br />
Wire (4 ,NO.) Rotor Inertia .(0.89kg. c?) <strong>Motor</strong><br />
Weight (1.7kg) !!Más productos,más descuentos!!
Catálogo generado por www.solostocks.com<br />
Página 44 de 56<br />
Otros<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166
Catálogo generado por www.solostocks.com<br />
Página 45 de 56<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166<br />
4 Axis Nema 34 Stepper <strong>Motor</strong> 1600 oz CNC<br />
Router or Mill<br />
Precio<br />
Pedido mínimo<br />
Información detallada del producto:<br />
375,00 EUR /<br />
Unidad<br />
1 Unidad<br />
¿Que hay en la caja? 1. 4 pcs Nema<br />
34 stepper motor 1600 oz.in bipolar 2. 4 pcs<br />
Stepper Driver DM860A Up to7.8A, 24-80VDC,<br />
DM860A 3. 2 pcs Power Supply 350W-48VDC 4. 1<br />
pc Breakout Board More quatities, More<br />
discounts!! Detailed information : 1. Nema 34<br />
stepper motor:34HS5435C-37B2 Model Step angel<br />
(1.8 ° ) <strong>Motor</strong> Length L(151mm) Rate<br />
Voltage(5.7V) Rate Current (3.5A) Phase<br />
Resistance (1.9 Ω ) Phase<br />
Inductance(22mH) Holding Torque (1600oz.in) Lead<br />
Wire (4 ,NO.) Rotor Inertia .(3.6kg. c?) <strong>Motor</strong><br />
Weight (5kg) 2.Stepper motor driver:DM860A<br />
High performance, low price l Average current<br />
control, 2-phase sinusoidal output current drive<br />
l Supply voltage from 24VDC to 80VDC l<br />
Opto-isolated signal I/O l Overvoltage, under<br />
voltage, overcorrect, phase short circuit<br />
protection l 14 channels subdivision and<br />
automatic idle-current reduction l 8 channels<br />
output phase current setting l Offline command<br />
input terminal l <strong>Motor</strong> torque is related with<br />
speed, but not related with step/revolution l<br />
High start speed l High hording torque under<br />
high speed 3.. Power Supply: The power is<br />
350W, the output voltage is 48VDC. 4. Breakout<br />
Board: Power supply: +5V DC. Built in C-class<br />
Optical-coupler. High quality with<br />
Surface-mount Tech.<br />
(I.V.A y portes no incluidos)
Catálogo generado por www.solostocks.com<br />
Página 46 de 56<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166<br />
Nema 34 motor paso a paso 1232 oz.in bipolar<br />
4wiresCNC MILL<br />
Precio<br />
Pedido mínimo<br />
46,00 EUR / Unidad (I.V.A y portes no incluidos)<br />
1 Unidad<br />
Información detallada del producto:<br />
Qué hay en la caja? 1pc Nema 34<br />
motor paso a paso 1232 oz.in bipolar Part No.:<br />
34HS1456 Frame Size: NEMA34 Step Angle: 1.8<br />
degree Voltage: 3.08V Current: 5.6A/phase<br />
Resistance: 0.55 Ohm/phase Inductance: 5.5<br />
mH/phase Holding torque: 8.4N.m 1200oz-in<br />
Rotor inertia: 2700g-cm2 Number of wire leads:<br />
4 Weight: 3.8 kg Length: 118mm The shaft of<br />
the stepper motor is 14MM,the length<br />
of the shaft is 37MM. If you need the detailed
Catálogo generado por www.solostocks.com<br />
Página 47 de 56<br />
mechanical dimensions ,you can contact with the<br />
me any time. RED A+ GREEN A- YELLOW B+ BLUE B-<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166
Catálogo generado por www.solostocks.com<br />
Página 48 de 56<br />
Otros<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166
Catálogo generado por www.solostocks.com<br />
Página 49 de 56<br />
3 Axis Stepper motor driver PEAK<br />
7.8A ,256micsteps CNC New<br />
Precio<br />
Pedido mínimo<br />
Información detallada del producto:<br />
120,00 EUR /<br />
Unidad<br />
1 Unidad<br />
3 Axis Stepper motor driver PEAK 7.8A<br />
,256micsteps CNC New DM860A Qué hay en la caja?<br />
#3 pcs Stepper motor driver--DM860A, High<br />
Perfermance Stepper Driver DM860A Up to7.8A,<br />
24-80VDC #1 pc Breakout Board #1 pc Parrallel<br />
Cable ( 25 pins) free offering when you bought<br />
above CARACTERISTICA MECANICA 1. Stepper motor<br />
driver DM860A: Introduction: DM860A is a<br />
type of two-phase hybrid stepping motor driver,<br />
The drive voltage of which is from 24VDC to<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166<br />
(I.V.A y portes no incluidos)
Catálogo generado por www.solostocks.com<br />
Página 50 de 56<br />
80VDC. It is designed for use with 2-phase<br />
hybrid stepper motor of all kinds with 57mm to<br />
110mm outside diameter and less than 8.0A phase<br />
current. This circuit that it adopts is similar<br />
to the circuit of servo control which enables<br />
the motor run smoothly almost without noise and<br />
vibration. Hording torque when DM860A run under<br />
high speed is also significantly higher than the<br />
other two-phase driver, what#s more, the<br />
positioning accuracy is also higher. It is<br />
widely used in middle and big size numerical<br />
control devices such as curving machine, CNC<br />
machine, and computer embroider machine, packing<br />
machines and so on. Features: l High<br />
performance, low price l Average<br />
current control, 2-phase sinusoidal output<br />
current drive l Supply voltage from<br />
24VDC to 80VDC l Opto-isolated signal<br />
I/O l Overvoltage, under voltage,<br />
overcorrect, phase short circuit protection l<br />
14 channels subdivision and automatic<br />
idle-current reduction l 8 channels<br />
output phase current setting l Offline<br />
command input terminal l <strong>Motor</strong> torque<br />
is related with speed, but not related with<br />
step/revolution l High start speed<br />
l High hording torque under high speed<br />
2. Breakout board: Description: # Power<br />
supply: +5V DC. # Built in C-class<br />
Optical-coupler. # High quality with<br />
Surface-mount Tech.<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166
Catálogo generado por www.solostocks.com<br />
Página 51 de 56<br />
Otros<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166
Catálogo generado por www.solostocks.com<br />
Página 52 de 56<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166<br />
5Axis Nema 23 stepper motor 425 oz & Driver<br />
DM542A CNC Router<br />
Precio<br />
Pedido mínimo<br />
Información detallada del producto:<br />
307,00 EUR /<br />
Unidad<br />
1 Unidad<br />
5Axis Nema 23 stepper motor 425 oz<br />
& Driver DM542A CNC Router ¿Qué hay en la<br />
caja? # 5 pcs Nema 23 stepper motor with 425<br />
oz.in # 5 pcs stepper motor driver DM542A,<br />
peak 4.2A, 128 micsteps, replacing M542 # 2pcs<br />
Power supply 350Watts (36VDC/9.7A) 1 pc<br />
Breakout board & 1 pc Parallel cable<br />
Detailed informations: 1. Nema 23 stepper<br />
motor:23HS9430 Model Step angel (1.8 ° ) <strong>Motor</strong><br />
(I.V.A y portes no incluidos)
Catálogo generado por www.solostocks.com<br />
Página 53 de 56<br />
Length L(115mm) Rate Voltage(6.4V) Rate Current<br />
(3A) Phase Resistance (2.1Ω ) Phase<br />
Inductance(9mH) Holding Torque (425oz.in) Lead<br />
Wire (4 ,NO.) Rotor Inertia .(0.89kg. c?)<br />
<strong>Motor</strong> Weight (1.55kg) # 2.Driver con<br />
microstepping para motor paso a paso: #<br />
1.Driver:DM542A DM542A is a type of two-phase<br />
hybrid stepping motor driver, The drive voltage<br />
of which is from 18VDC to 50VDC. It is designed<br />
for use with 2-phase hybrid stepper motor of all<br />
kinds with 42mm to 86mm outside diameter and<br />
less than 4.0A phase current. This circuit that<br />
it adopts is smiliar to the circuit of servo<br />
control which enables the motor run smoothly<br />
almost without noise and vibration. Hording<br />
torque when DM542A run under high speed is also<br />
significantly higher than the other two-phase<br />
driver, what#s more, the positioning accuracy is<br />
also higher. It is widely used in middle and big<br />
size numerical control devices such as curving<br />
machine, CNC machine, and computer embroider<br />
machine, packing machines and so on. Features:<br />
High performance, low price Average current<br />
control, 2-phase sinusoidal output current drive<br />
Supply voltage from 18VDC to 50VDC<br />
Opto-isolated signal I/O Overvoltage, under<br />
voltage, overcorrect, phase short circuit<br />
protection 15 channels subdivision and<br />
automatic idle-current reduction 8 channels<br />
output phase current setting Offline command<br />
input terminal <strong>Motor</strong> torque is relased with<br />
speed, but not related with step/revolution<br />
High start speed High hording torque under<br />
high speed 3.Fuente de alimentación The power<br />
of this power supply is 350Watts, and the output<br />
voltage/current is 36VDC/9.7A. 4. Breakout<br />
board: Description: Built in DB25 male<br />
connector # Built in C-class Optical-coupler.<br />
# High quality with Surface-mount Tech.<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166
Catálogo generado por www.solostocks.com<br />
Página 54 de 56<br />
Otros<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166
Catálogo generado por www.solostocks.com<br />
Página 55 de 56<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166<br />
1AXIS Nema 42 Stepper <strong>Motor</strong> 3256ozin CNC<br />
Engrave Control,Mill Cut<br />
Precio<br />
Pedido mínimo<br />
Información detallada del producto:<br />
1AXIS Nema 42 Stepper <strong>Motor</strong> 3256oz<br />
& 220VAC, 8A CNC Engrave Control,Mill Cut<br />
Qué hay en la caja? 1pc Nema 42 stepper motor<br />
3256 oz.in bipolar 1pc Stepper motor driver<br />
110-220VAC,7A, 60000ppr 1 pc Breakout Borad<br />
Note: This kit dont need power supply, the<br />
reason is that the input voltage of the stepper<br />
motor driver DQ2722M is 110-220VAC. Detailed<br />
information about this item: 1. Nema 42<br />
stepper motor:42HS5460 Electrical<br />
236,00 EUR /<br />
Unidad<br />
1 Unidad<br />
(I.V.A y portes no incluidos)
Catálogo generado por www.solostocks.com<br />
Página 56 de 56<br />
Specification: Model Step angel (1.8 ° ) <strong>Motor</strong><br />
Length L(150mm) Rate Voltage(4.08V) Rate Current<br />
(6.0A) Phase Resistance (0.8Ω ) Phase<br />
Inductance(14mH) Holding Torque (3256oz.in) Lead<br />
Wire (4 ,NO.) Rotor Inertia .(10.9kg. c?)<br />
<strong>Motor</strong> Weight (8.4kg) 2. Stepper motor driver:<br />
DQ2722M FEATURES l High<br />
performance, low price l 16 channels<br />
constant angle, constant torque micro steps,<br />
highest micro step: 60000ppr l Highest<br />
response frequency: 200Kpps l Current<br />
of winding will be reduced by approximately 50%<br />
when no step pulse command is received for 0.1<br />
second l Opto-isolated signal I/O l<br />
Drive current is adjustable in 16 channels from<br />
1.2A/phase to 7.0A/phase l Single<br />
power supply from 110V to 220VAC l<br />
Phase terminal memory function (motor phase<br />
terminal is memorized after input pulse train<br />
stopping 5s and it is recovered when stepper<br />
driver power on or signal MF changes from low<br />
level to high level) 3. Breakout board:<br />
Description: Built in DB25 male connector.<br />
Power supply: +5V DC. Built in C-class<br />
Optical-coupler. High quality with<br />
Surface-mount Tech. Más productos, más descunetos!!!<br />
<strong>Changzhou</strong> <strong>Longs</strong> <strong>Motor</strong> S.A.<br />
marychen1987@hotmail.com<br />
Teléfono: +86-51985138166