index of the reports of the bridge and structures standards committee

More documents

Recommendations

Info

INDEX OF THE REPORTS OF THE BRIDGE AND STRUCTURES STANDARDS COMMITTEE Fifty-sixth Meeting - April, 1977 645 Design of steel trestles for temporary bridging. 646 Emergency plate girders made of light weight aluminum alloy. 647 Draft criteria for fabrication and erection of steel work of microwave towers self supporting type- including inspection and maintenance. 648 Modification to the existing designs for 100m high antenna towers to Drg. Nos. RDSO / B- 789 & 786 series for medium and high wind pressure areas in view of revision of IS: 802 (part-i) 1967 in 1973 followed by amendment no. 1 in 1974. 649 Spacing of bridge timers at rail joints. 650 Quinquennial revision of list of important bridges and tunnels on Indian Railways. 651 Study group to deal with maintenance problems of bridges and structures. 652 Effect of omission of Sway Bracings in through girder Spans. 653 To consider standardisation of practices for strengthening substructures. 654 Pipeline crossings under Railway track. 655 Construction of Canal crossings with Precast concrete elements. 656 Testing and rating of masonry Arch bridges. 657 Provision of approach slabs for relieving the earth pressure behind abutments. 658 Accessing the stability of abutments of Arch bridges by theoretical calculations. 659 Review of the pending BSC items. 660 Revised draft criteria for structural design of microwave antenna towers - selfsupporting type. Extra-Ordinary Meeting - November, 1977 661 (1) Draft specifications for fabrication and erection of steel work for Microwave Towers self-supporting type (2) Draft manual of Instructions for maintenance of steel work of Microwave Tower self-supporting type. 662 IRS Code of Practice for design of substructure of bridges (Bridge Substructure Code) Fifty-seventh Meeting - April, 1978 663 Revision of IRS B1-62 for steel girder bridges. 664 Revision of IRS B2-1963 - erection and riveting of bridge girders. 665 To examine the (i) Draft of Practice for fabrication and erection of steel work of Microwave towers - self supporting type and (ii) draft manual of instructions for maintenance of steel work of microwave towers self supporting type as recommended by the BSC vide item no. 661 in the light of Railway Board’s letter no. 78/WL/BR-1/2 dt. 27-2-78, and to make recommendations. 666 Plate girders to RBG standard of loading - standardisation of . 667 Open web triangulated through type girders to RBG standard of loading - standardisation. 668 Revision of IRS Bridge Substructure Code. 669 Welded Bridge Girders 670 Design of composite girders. 671 Design of PSC slabs to RBG standard of loading. 672 Metallising of girder bridges and turntables. 673 Painting system for bridge girders located in coastal areas. 674 Portland Pozzuolana Cement to IS: 1489-1976. 675 Use of deformed high strength bars in Railway bridges. 676 Revision of IRS Bridge Substructure Code.
INDEX OF THE REPORTS OF THE BRIDGE AND STRUCTURES STANDARDS COMMITTEE Extra-Ordinary Meeting - November, 1978 662 Revised IRS Substructure Code. Fifty-eighth Meeting - April, 1979 677 Adoption of international system (SI units) 678 Permissible bond stresses when deformed bars are used. 679 Permissible limit of crack widths in reinforced concrete structures. 680 Design of RCC Bridge columns subject to combined action of vertical loads and bending. 681 Design of RCC Bridge slabs for spans of 4.0m and 5.0m using high yield strength-deformed bars to RBG loading. 682 Design of composite girders. 683 Design of Prestressed concrete Box girders to RBG standard of loading. 684 Seismic forces to be considered in the design of railway bridges. 685 Design of 18.3m span plate girder welded type with high strength structural steel with enhanced corrosion resistance. 686 Bridge timbers built up with ordinary track sleepers. 687 Review of follow up action taken on recommendations of BSC. 688 Adoption of rationalised spans. Extra-Ordinary Meeting - Jan./Feb., 1980 689 Review of longitudinal forces Fifty-ninth Meeting - July, 1980 690 Welding of high strength deformed bars. 691 Measurement of Scour around bridge piers. 692 Portland Pozzuolana Cement to IS: 1489-1976. 693 Design of RCC Bridge Slabs for spans 0.5m to 5.0m using high strength deformed bars to RBG Loading. 694 Design of prestressed concrete bridge slabs, 7.5m span. 695 Design of prestressed concrete box girder to RBG loading, 18.3m span 696 Bridge & Structures Study Group on Inspection and maintenance of Bridges & Structures. 697 Design of 92/96 m RBG standard girders. 698 Welded Bridge girders, 24.4 and 30.5m spans. 699 Roller & rocker bearings for plate girder spans. 700 Elastomeric bearings for spans 12.2, 18.3, 24.4 and 30.5m. 701 High strength friction grip bolts. 702 Antenna tower design in MWP Zone as per Design Criteria 1977. 703 Review of action taken on items of the Bridge & Substructures Standards Committee. 704 Checking of Bridge Structures for the purpose of gauge conversion to wider gauge. 705 Seismic force to be considered in the design of Railway Bridge. Extra-Ordinary Meeting - Feb., 1981 706 Revision of clauses on impact of IRS Bridge Rules.
Page 1 and 2: INDEX OF THE REPORTS OF THE BRIDGE
Page 21: INDEX OF THE REPORTS OF THE BRIDGE

index of the reports of the bridge and structures standards committee

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?