BLM 5000 BLM 5000 - Atlas Copco

BLM 5000
BLM 5000
Two channels torque / angle / preload analyzer
Two channels torque / angle / preload analyzer

Atlas Copco BLM 5000
The BLM 5000 Dual Analyzer is the optimal tool for providing threaded
fastener quality assurance throughout assembly plants.
With two simultaneously read input channels, the user has the ability
to evaluate two tightening operations at the same time. Additionally,
the BLM 5000 can be used for tool calibration and tightening analysis.
User friendly
BLM 5000’s software
is user friendly!
The software takes
the users step-by-step
through the audit route.
Safe
The special rubber-clad
enclosure prevents damage
to the assembled product.
Lightweight and
resistant
The carbon fiber frame keeps
the weight to a minimum (the
chassis weighs just 350 g / 12 oz)
and ensures that the BLM 5000
is strong enough for industrial
applications.
Keyboard and mouse
BLM 5000 does not need a
keyboard: a virtual keyboard is
always available for data entry.
For large data input,
an external USB mouse
and keyboard can be
easily connected.
Hardware
BLM 5000 runs on
a low power PC
running Windows CE.
Equipped with 3 USB
ports, RS232 and
network port.
Statistics
BLM 5000 calculates minimums,
maximums, averages, standard
deviation and Cp/Cpk values. The
BLM 5000 displays the data
collected and the X/R charts. Data
can be exchanged with Torque
Supervisor.

Fast battery charge and exchange
External double battery charger has a slot to recharge a
second optional battery during operation. Ready to run for
three straight shifts.
Residual torque checks
Nutrunner and pulse
tool evaluation with rotary
torque/angle transducer
2 channels simultaneously
evaluate multi-spindles. It can
be connected to Atlas Copco
QRTT/IRTT transducers.
COLLECTING
DATA
Touch screen display
The BLM 5000 has a clear 10.4”
color touch screen display.
Analysis of joint
Torque/Angle/Preload
Simultaneous measurement
of the tool transducer and a
reference transducer
Friction coefficient µ
evaluation in
conjunction with
TPT transducer
Torque
Preload
Angle

TECHNICAL FEATURES
Battery charger Two trigger input
On /Off
USB
FEATURES
Model
Transducer connectors
TECHNICAL DATA
Description
Reset
Two channels Two channels which simultaneously which simultaneously read torque read torque
and angle and transducers angle transducers in mV/V in or mV/V preamplified or preamplified
+- 5 V. +- These 5 V. two These channels two channels can also can be also used be used
with torque with torque wrenches, wrenches, force transducers force transducers or load or load
washers. washers.
Standard Standard Atlas Copco Atlas connectors Copco connectors for QRTT, for QRTT,
IRTT, SRTT, IRTT, MRTT SRTT, are MRTT provided are provided with automatic with automatic
calibration calibration
Dual microprocessor analyzer:
PC board: micro PXA 255 – 400 MHz,
64 Mb RAM, storage card 512 Mb
Acquisition board, micro X86 – 133 MHz,
32 Mb RAM, 16 bit, sampling rate 20kHz
Touch screen display 10.4”, SVGA 800 x 600 TFT,
contrast 500:1, 256k colours
Li-Ion battery 6,1 Ah - 10,9 V
RS232
Network port
Two external trigger are available for zeroing the
angle counter
On/Off with stand by function for fast restart
and low power consumption
Optional software for easy evaluation of the
friction coefficient µ with the BLM TPT
torque/preload transducer.
1 RS232 port, 1 USB client 2.0,
2 USB host 2.0, 1 Ethernet 10-100 Mbit
Supplied complete with battery charger and
leather shoulder strep.
Optional: additional battery, rigid metal case,
software for friction coefficient µ
Ordering No.
BLM 5000 DA Dual Analyzer 8059 0955 50
ADDITIONAL BATTERY BLM 5000 Li-Ion 6,1 Ah – 10,9 V 8059 0929 51
RIGID CASE BLM 5000 Rigid metal case 8059 0929 52
TPT FRICTION SOFTWARE Software for friction coefficient µ 8059 0929 53
www.atlascopco.com
www.atlascopco.com
9833 1744 9833 01 1744 21 Printed Printed in Sweden in Sweden 2006:1 2006:1