LIGHT COMMERCIAL BOILERS - Immergas

vICTRIx 90
Open chamber fan assisted wall-hung condensing boiler for heating only, equipped with circulator and safety valve.
The boiler is approved for installation in both indoor heating plants and outside buildings, without requiring additional
protection. It can be installed as single appliance or in cascade.
The generator is equipped with electronic board, allowing to adjust the functioning parameters of the appliance to the
specific exigencies of every single system.
Nominal heat output of 90 kW
Minimum heat output of 22,5 kW
Compact dimensions
Stainless steel condensing module
4 bar safety valve with discharge funnel
Double NTC probe for optimum temperature control
IPX5D protection index
Frost protection up to -5 °C
Control board with visual display
Autodiagnosis system
Possibility to connect a separate storage tank unit
Model Height width Depth
vICTRIx 90 1010 mm 600 mm 610 mm
Model
vICTRIx 90
Code
L.G.
L.P.G.
3.020425
3.020425GPL
Heat
output
kw
Efficiency Condensing/
rating premixed
(D.P.R. 660/96) burner
Reduced pollutant
emissions
(NOx-CO)
Protection
index
frost
protection
90,0 4 stars • • IPX5D -5 °C
Main options Code
External sensor 3.015266
Three-way valve kit 3.015223
Hydraulic manifold kit 3.015224
Main flue kits Code
Terminal horizontal outlet kit Ø 80 3.015255
Terminal vertical outlet kit Ø 80 3.015256
Horizontal concentric kit Ø 80/125 3.015242
For good performance and safe operation use Immergas “Green Series” pipes and terminal flue outlet only.
THE RANGE
0051BO2448 11