Tier 1 Selection Guide - Atlas Copco

More documents

Recommendations

Info

Tool Station – much more than your ordinary tool carriage Cost effi ciency right along the line The Atlas Copco Tool Station is a unique tool and aid for product development. This fully-fi tted mobile assembly system will increase your working effi ciency and cut costs over the entire production cycle – from prototype construction to the pilot phase through to standard production. And once Tool Station has accelerated the entire production cycle, it also becomes a backup in ongoing standard production for your assembly tools, which import the fi nal assembly process into the Tool Station database. The Tool Station’s system software creates a complete parameter set for every bolted joint. The Tool Station manages an infi nite number of parameter sets and supports all tightening applications. All applications are automatically programmed through the simple import of an Excel application list. Once the required tightening method is selected via keypad or touchscreen, the computer sets the suitable control parameters and the process data can be exported to MS Excel following tightening. Tools are automatically selected using the Tool Station’s system software. Tool Station thus guarantees that the tightening tool and selected tightening strategy are 100% compatible. A maximum of 2 controllers enable the operation of practically every tool, from 1– 4000Nm. Tests and documentation The Tool Station controls the tightening tools, whilst recording and checking the tightening data at the same time. The electronic torque verifi cation key with transducer in Tool Station enables the manual verifi cation and measurement of deformation and installed torque values. The comprehensive documentation in Tool Station contains data such as VIN Code (Vehicle Identifi cation Number), application name, program name, vehicle type, date, time, parameter sets, limit values (torque/rotational angle) and tightening results, including subsidence and installed torque value. Pre-series production – everything you need for a swift start Pre-series production realizes some units, although full tool equipping at standard level is not achieved at this early stage. The Tool Station used for pilot phases contains everything you need for your tightening specifi cations. Data can be transferred to other carts or existing ones can be integrated into the project. In either case, all bolting processes can get off to a quick start. 35
Atlas Copco has more than 3,000 electric, pneumatic and battery tools, assembly systems, software and a wide range of accessories. This catalogue contains only a selection of our products and services. You will fi nd the entire range in our Industrial Power Tools catalogue or log in to www.atlascopco.com/tools Committed to your superior productivity. www.atlascopco.com 9833 1711 01 Printed in Sweden 2007:1
Page 1 and 2: Tier 1 Selection Guide Industrial p
Page 3 and 4: 4 1. Nutrunner selection guide This
Page 5 and 6: Comparison: DS Box, BASIC and ADVAN
Page 7 and 8: 3.2 Power Focus 3100 Graph 1-channe
Page 9 and 10: 3.7 Factory Overview The control ro
Page 11 and 12: 4.5 Tool cable for Tensor DL tools
Page 13 and 14: 6.2 Pistol grip nutrunners 14 Squar
Page 15 and 16: 7.2 Pistol grip nutrunners Designat
Page 17 and 18: Torque Weight Length/ Square drive
Page 19 and 20: 9.1 ETX structure Designation Order
Page 21 and 22: (On request) The MMS enables extrem
Page 23 and 24: 12.2 ToolsTalk ACTA 3000 The ToolsT
Page 25 and 26: 12.6 ACTA 3000 measuring device 12.
Page 27 and 28: 13.2 Angle screwdrivers 28 Model To
Page 29 and 30: 13.5 Pulsor, digitally controlled i
Page 31 and 32: 15.1 ToolScan RCM RCM (Reliability
Page 33: 34 16. Advanced Fastening Technolog

Tier 1 Selection Guide - Atlas Copco

Create successful ePaper yourself

Delete template?

Save as template?