Tier 1 Selection Guide - Atlas Copco
Tier 1 Selection Guide - Atlas Copco Tier 1 Selection Guide - Atlas Copco
10. Accessories 10.1 RE alarm (accessory bus) RE alarm with user-confi gurable light display and acoustic signal for any information required. Incl. two bus terminal resistors. (Connecting cable to be ordered separately.) Designation Ordering No. RE alarm 8433 0560 03 10.2 Selector (accessory bus) 4 or 8-way socket selector with LEDs guides the operator through a tightening sequence. Incl. two bus terminal resistors. (Connecting cable to be ordered separately.) Designation Ordering No. Selector 4 8433 0610 04 Selector 8 8433 0610 08 10.3 I/O Expansion box I/O upgrade for increasing number of relays and opto couplers, if extra ones are required. Incl. two bus terminal resistors. (Connecting cable to be ordered separately.) Designation Ordering No. I/O upgrade 8433 0564 38 10.4 Cable for the accessory bus Designation Ordering No. 0.5 m 4222 0470 00 1 m 4222 0470 01 3 m 4222 0470 03 5 m 4222 0470 05 10 m 4222 0470 10 30 m 4222 0470 30 Bus terminal resistor 4222 0443 00 10.5 Scanner The DLL6010 is designed for heavy-duty industrial use. It reads bar codes from a distance of up to 1.2 m. Designation Ordering No. Scanner DLL6010 8995 0015 49 Wall table bracket 8995 1015 95 Smooth cable RS232 9P FEM 8995 1037 97 Spiral cable RS232 9P FEM 8995 1037 98 Power supply 220 V 8995 1022 19 Manual 8995 1015 96 A complete scanner for Power Focus 3000 consists of: scanner + cable (smooth or spiral) + power supply. 10.6 Operator panel The operation panel is a confi gurable lamp and switch box that can be connected to both Power Focus and PowerMACS controllers. Designation Ordering No. Operator panel advanced 8433 0565 00 Operator panel basic 8433 0565 10 10.7 Stacklight The stacklight ESL-04 is a standard component that can be easily installed and programmed. Designation Ordering No. Stacklight ESL-04 8433 0570 13 10.8 ComNode The ComNode offers a standard hardware to integrate software applications together with Atlas Copco fastening equipment. Designation Ordering No. ComNode 8433 2710 00 ComNode Touch 8433 2710 10 ComNode with ATS software 10 spindles 8433 2710 01 ComNode with ATS software 10 spindles 8433 2710 11 21
(On request) The MMS enables extremely fl exible workplace design. 5 stable castors allow the MMS to be moved around freely, while its lockable wheels keep it stable and safe. The tightening station can be fi tted with different Atlas Copco controllers and tools. 11.1 Basic design 22 11. Mobile Modular Tightening Station (MMS) Steel baseplate with 5 lockable wheels Stand from aluminum profi les (as shown) with space for 1 Power Focus 3000 Graph Controller or 2 Power Focus 3000 Compact/DS Controllers. Space for RE alarm Adjustable rack with space for selector and/or scanner Height-adjustable grab handle
- Page 1 and 2: Tier 1 Selection Guide Industrial p
- Page 3 and 4: 4 1. Nutrunner selection guide This
- Page 5 and 6: Comparison: DS Box, BASIC and ADVAN
- Page 7 and 8: 3.2 Power Focus 3100 Graph 1-channe
- Page 9 and 10: 3.7 Factory Overview The control ro
- Page 11 and 12: 4.5 Tool cable for Tensor DL tools
- Page 13 and 14: 6.2 Pistol grip nutrunners 14 Squar
- Page 15 and 16: 7.2 Pistol grip nutrunners Designat
- Page 17 and 18: Torque Weight Length/ Square drive
- Page 19: 9.1 ETX structure Designation Order
- Page 23 and 24: 12.2 ToolsTalk ACTA 3000 The ToolsT
- Page 25 and 26: 12.6 ACTA 3000 measuring device 12.
- Page 27 and 28: 13.2 Angle screwdrivers 28 Model To
- Page 29 and 30: 13.5 Pulsor, digitally controlled i
- Page 31 and 32: 15.1 ToolScan RCM RCM (Reliability
- Page 33 and 34: 34 16. Advanced Fastening Technolog
- Page 35: Atlas Copco has more than 3,000 ele
10. Accessories<br />
10.1 RE alarm<br />
(accessory bus)<br />
RE alarm with user-confi gurable light display and<br />
acoustic signal for any information required. Incl. two<br />
bus terminal resistors. (Connecting cable to be ordered<br />
separately.)<br />
Designation Ordering No.<br />
RE alarm 8433 0560 03<br />
10.2 Selector<br />
(accessory bus)<br />
4 or 8-way socket selector with LEDs guides the<br />
operator through a tightening sequence.<br />
Incl. two bus terminal resistors. (Connecting cable<br />
to be ordered separately.)<br />
Designation Ordering No.<br />
Selector 4 8433 0610 04<br />
Selector 8 8433 0610 08<br />
10.3 I/O Expansion box<br />
I/O upgrade for increasing number of relays and opto<br />
couplers, if extra ones are required. Incl. two bus terminal<br />
resistors. (Connecting cable to be ordered separately.)<br />
Designation Ordering No.<br />
I/O upgrade 8433 0564 38<br />
10.4 Cable for the accessory bus<br />
Designation Ordering No.<br />
0.5 m 4222 0470 00<br />
1 m 4222 0470 01<br />
3 m 4222 0470 03<br />
5 m 4222 0470 05<br />
10 m 4222 0470 10<br />
30 m 4222 0470 30<br />
Bus terminal resistor 4222 0443 00<br />
10.5 Scanner<br />
The DLL6010 is designed for heavy-duty industrial use.<br />
It reads bar codes from a distance of up to 1.2 m.<br />
Designation Ordering No.<br />
Scanner DLL6010 8995 0015 49<br />
Wall table bracket 8995 1015 95<br />
Smooth cable RS232 9P FEM 8995 1037 97<br />
Spiral cable RS232 9P FEM 8995 1037 98<br />
Power supply 220 V 8995 1022 19<br />
Manual 8995 1015 96<br />
A complete scanner for Power Focus 3000 consists of: scanner +<br />
cable (smooth or spiral) + power supply.<br />
10.6 Operator panel<br />
The operation panel is a confi gurable lamp and switch<br />
box that can be connected to both Power Focus and<br />
PowerMACS controllers.<br />
Designation Ordering No.<br />
Operator panel advanced 8433 0565 00<br />
Operator panel basic 8433 0565 10<br />
10.7 Stacklight<br />
The stacklight ESL-04 is a standard component<br />
that can be easily installed and programmed.<br />
Designation Ordering No.<br />
Stacklight ESL-04 8433 0570 13<br />
10.8 ComNode<br />
The ComNode offers a standard hardware<br />
to integrate software applications together<br />
with <strong>Atlas</strong> <strong>Copco</strong> fastening equipment.<br />
Designation Ordering No.<br />
ComNode 8433 2710 00<br />
ComNode Touch 8433 2710 10<br />
ComNode with ATS software 10 spindles 8433 2710 01<br />
ComNode with ATS software 10 spindles 8433 2710 11<br />
21