VICTRIX Superior kW Export VICTRIX Superior kW X ... - Immergas

VICTRIX Superior kW Export VICTRIX Superior kW X ... - Immergas VICTRIX Superior kW Export VICTRIX Superior kW X ... - Immergas

eng.immergas.com
from eng.immergas.com More from this publisher
03.08.2013 Views

2 VICTRIX Superior 32 kW X FEATURES Condensing type wall-hung sealed chamber fan assisted premix boiler for central heating with maximum useful heat output of 32 kW (27.520 kcal/h) with high efficiency and forced circulation. Thanks to a particular kit (optional) it can be coupled to a separate 80, 105, 120 and 200 litre Storage Tank Unit for the production of domestic hot water. By varying the type of installation the boiler classification also varies. OUTDOOR INSTALLATION (in a partially protected place): Appliance type C with direct air intake - if installed using a flue terminal and the (optional) mandatory upper cover kit, also eliminating a sealed chamber intake cap. Appliance type C 13 / C 33 / C 83 -if installed using the vertical or horizontal concentric kits (cover kit recommended but not mandatory) or the Ø 80/80 separator kit without using the upper cover kit. INDOOR INSTALLATION: Appliance type C 13 / C 33 / C 43 / C 53 / C 83 - if installed using the vertical or horizontal concentric kits or the Ø 80/80 separator kit. Appliance type B 23 - if installed using a flue kit and the (optional) mandatory upper cover kit, also eliminating a sealed chamber intake cap. The boiler comprises: • total premix combustion system with steel cylindrical multigas burner, complete with ignition electrode and ionisation control electrode; • pneumatic gas valve with double shutter; • primary gas/water heat exchanger with stainless steel coil; • stainless steel combustion chamber insulated internally using ceramic panels; • fan for the evacuation of fumes at an electronically variable speed; • circuit for the elimination of condensate including siphon and flexible drain pipe; • hydraulic unit comprising an adjustable-speed circulating pump with built-in air separator, adjustable by-pass, , absolute pressure switch for the primary circuit, 3 bar safety valve for the primary circuit, a system draining fitting , ball valve for system filling; • 8.0 litre expansion vessel system with diaphragm (real 8.0) with pre-load at 1.0 bar and manometer • water overheating safety thermostat and fumes overheating thermostat; • control panel with Stand-by/On button, functioning mode button (Summer/Winter), domestic hot water priory temporary inhibition 2 VICTRIX Superior kW Export VICTRIX Superior kW X Export VICTRIX Superior kW X is the wall-hung condensing boiler for room central heating only with 32 kW power which, thanks to condensation technology is distinguished for its particularly high efficiency. The innovative total premix combustion system and the special environment-friendly burner mean it can run on natural or LPG gas, guaranteeing extremely low pollutant emissions (the boiler belongs to the most environment-friendly class envisioned by European Standards - class 5). Thanks to a particular kit (optional) the boiler can be connected to a separate Immergas 80, 105, 120 or 200 litre Storage Tank Unit, which guarantees a large production of domestic hot water. This is especially ideal for homes with more than one bathroom and where great amounts of water are required quickly. The boiler is type-approved also for functioning outdoors in partially protected places (standard anti-freeze protection -3°C, with optional kit for -15°C). The new microprocessor controlled electronics allows optimum control of temperatures both in central heating and domestic hot water production modes (if the optional storage tank unit kit is installed) and it may also be coupled to the exclusive Super CAR and to the external probe (both optional features), which allow to manage, control and program the boiler at a distance with extreme simplicity, thus optimising functioning through climatic heat adjustment. button (if the Storage Tank Unit coupling kit is used), Reset/exit programming menu button, programming menu entry/data confirmation button, central heating system temperature adjustment selector, domestic hot water temperature adjustment selector (if the Storage Tank Unit coupling kit is used). • microprocessor driven P.C.B. with continuous flame modulation with 2 sensors for central heating (flow and return) with P.I.D. control and modulation range from 6.4 to 32 kW: • central heating temperature selection range 25-50°C or 25-85°C (standard setting); • electronic ignition with ionisation control; • self-diagnostics system with digital display of the operating status and anomalies by means of a back-lit display; • setting of the boiler functioning parameters using buttons and selectors with display of status and operating mode by means of a back-lit display; • ignition retarder in central heating mode, anti-freeze protection system (up to -3°C), circulator anti-block device function, postventilation function, chimney sweep function, circulator functioning mode selection; • preparation for connection with the Super CAR, the CAR, chronothermostat, external probe and the zones control unit; • IPX5D electrical insulation level. • possibility of coupling to the system for ducting of existing flues Ø 60 mm and Ø 80 mm. Supplied with sample points for combustion analysis, lower protection grid, connection group with depth-adjustable fittings and gas interception cock. Category II 2H3+ appliance, functions with natural and L.P.G. gas. CE Mark. It is available in the model: • VICTRIX Superior 32 kW X Export code 3.019104 NOTA BENE: for correct installation of the boiler the Immergas "Green Range" air intake/fumes exhaust kit must be used.

3 VICTRIX Superior kW MAIN COMPONENTS KEY: 1 - D.H.W. flow rate regulator 2 - Condensate drain tap 3 - D.H.W. probe 4 - D.H.W. flow meter 5 - Fan 6 - Gas nozzle 7 - Gas valve 8 - Venturi 9 - Detection electrode 10 - Flue safety thermostat 11 - Air intake pipe 12 - Condensation module 13 - Negative signal pressure point 14 - Positive signal pressure point 15 - Sample points (air A) - (fumes F) VICTRIX Superior kW Export VICTRIX Superior kW X Export 3 16 - Manual vent valve 17 - Burner 18 - Ignition electrode 19 - Flow probe 20 - Safety thermostat 21 - Aqua Celeris 22 - Automatic vent valve 23 - System expansion vessel 24 - Return probe 25 - Boiler pump 26 - System pressure switch 27 - D.H.W. heat exchanger 28 - 3 bar safety valve 29 - 3-way valve (motorised) 30 - System draining valve 31 - D.H.W. inlet probe 32 - System filling valve

3 <strong>VICTRIX</strong> <strong>Superior</strong> <strong>kW</strong> MAIN COMPONENTS<br />

KEY:<br />

1 - D.H.W. flow rate regulator<br />

2 - Condensate drain tap<br />

3 - D.H.W. probe<br />

4 - D.H.W. flow meter<br />

5 - Fan<br />

6 - Gas nozzle<br />

7 - Gas valve<br />

8 - Venturi<br />

9 - Detection electrode<br />

10 - Flue safety thermostat<br />

11 - Air intake pipe<br />

12 - Condensation module<br />

13 - Negative signal pressure point<br />

14 - Positive signal pressure point<br />

15 - Sample points (air A) - (fumes F)<br />

<strong>VICTRIX</strong> <strong>Superior</strong> <strong>kW</strong> <strong>Export</strong><br />

<strong>VICTRIX</strong> <strong>Superior</strong> <strong>kW</strong> X <strong>Export</strong><br />

3<br />

16 - Manual vent valve<br />

17 - Burner<br />

18 - Ignition electrode<br />

19 - Flow probe<br />

20 - Safety thermostat<br />

21 - Aqua Celeris<br />

22 - Automatic vent valve<br />

23 - System expansion vessel<br />

24 - Return probe<br />

25 - Boiler pump<br />

26 - System pressure switch<br />

27 - D.H.W. heat exchanger<br />

28 - 3 bar safety valve<br />

29 - 3-way valve (motorised)<br />

30 - System draining valve<br />

31 - D.H.W. inlet probe<br />

32 - System filling valve

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!