CATALOGUE - Immergas

More documents

Recommendations

Info

Green Series Ø 80 mm flexible ducting system For condensing boilers Immergas also offers a specific Ø 80 mm flexible ducting system for its condensing boilers, including VICTRIX 50 model. This system, made in PP, is particularly suitable for lining existing chimney and flue stacks (or shafts) that are not perfectly straight, where a rigid ducting system could in some cases be difficult to install. In effect, the flexibility of the duct allows installation even in chimneys with significant misalignments. The flexible pipe is the essential element of the system and it is a sole component 12 meters long. Depending on the particular installation, this component can either be cut to size or, for rises in excess of 12 meters, extended with a special flexible -to-flexible adapter kit. The flexible pipe has no joins, a feature which together with the lightness of the system as a whole, signifies extreme versatility of use as well as notable ease of installation. From the installation point of view, the connection to the boiler flue outlet is made with an 87° x Ø80 mm bend; this is then connected to the duct at the bottom of the run, and the flue terminal to the top. The flexible duct is anchored to the inside wall of the chimney stack by means of a metal ring and spider; it is also connected rigidly to the bend at the bottom by way of a special adapter, and to the flue terminal at the top. Once installed, the flue duct can be inspected from the bottom end, by way of the flap provided. Installers should note that 80 mm is the Nominal Diameter of the flexible duct (in practice ,the external diameter is 89,5 mm). The whole ducting system concerns the first 5 kits shown in these pages. The adapting kit F/F is necessary only if 2 parts have to be joined with connecting 2 flexible pipes. IMMERGAS GUARANTEE Immergas guarantees its ducting system according to the updates technical regulation, on condition that it is installed following the installation safety rules. The installation has to be effected in conformity with the assembling instructions provided by the constructor. 34 Immergas | Catalogue ʻ09
Green Series Ø 60 mm ducting system Description Code Flexible duct kit Ø 80 mm, L=12 m + 4 centering spacer 3.014170 Kit support components for flexible ducting system 3.014171 Vertical outlet kit Ø 80/125 for flexible ducting system 3.014174 Valley kit for flexible ducting system 3.014173 Chimney hole closing panel kit 3.012008 Adapter F/F 3.014172 Catalogue ʻ09 | Immergas 35
Page 1: CATALOGUE Gas boilers and condensin
Page 4 and 5: NEW VICTRIX Zeus Superior kW Heat o
Page 6 and 7: VICTRIX Superior kW Heat output of
Page 8 and 9: VICTRIX 115 Heat output of 115 kW;
Page 10 and 11: VICTRIX 75 Heat outputs of 75 kW; H
Page 12 and 13: VICTRIX Superior kW X Heat output o
Page 14 and 15: NEW HERCULES Condensing Heat output
Page 16 and 17: AVIO/ZEUS kW Heat outputs of 24 and
Page 18 and 19: NIKE/EOLO Mini kW Special Heat outp
Page 20 and 21: NEW NIKE/EOLO Star Open chamber con
Page 22 and 23: NIKE/EOLO Mini kW S Heat outputs of
Page 24 and 25: JULIUS Star Wall-hung open chamber
Page 26 and 27: IMMERSTOR Stainless steel storage t
Page 28 and 29: FLUE SYSTEMS RANGE green series
Page 30 and 31: Green Series Flue systems for VICTR
Page 32 and 33: Green Series Flue System for Conden
Page 34 and 35: Green Series Ø 60 mm ducting syste
Page 39 and 40: FLUE SYSTEMS RANGE blue series
Page 41 and 42: Blue Series Flue System for Traditi
Page 43 and 44: Blue Series Flue System for Traditi
Page 45 and 46: Blue Series Ø 80 mm ducting system
Page 47: Blue Series Flue system components
Page 50 and 51: Hydraulic system 48 Immergas | Cata
Page 56 and 57: Climatic regulation 54 Immergas | C
Page 58 and 59: Climatic regulation 56 Immergas | C
Page 60 and 61: Boilers and storage tank units conn
Page 62 and 63: Index of codes Code Description 3.5
Page 64 and 65: Code Description EAN code 3.014439
Page 66: Code Description 3.018865 Boiler EO

CATALOGUE - Immergas

Create successful ePaper yourself

Delete template?

Save as template?