User Guide for 3050 ICP Users - Mitel Edocs

5055 SIP Phone User Guide (Rev. A)
Example of a Specific Configuration File
# Mitel 5055 SIP Phone Configuration File
# this file name= SXXXXXXXXXXXX.cfg
# where xxxxxxxxxxxx is the MAC address padded with 0s (e.g., 0F for F)
# comment lines start with a'#'
# no escape '\' continue lines are allowed
# the string length of the parameter must be less than 128 characters
# parameter template=
# token = parameter ; comments
# if the setting is configurable using Web Configuration Tool, the location of that
# setting is shown in parentheses)
########################################################################
# Configuration Begins Here
########################################################################
# HOST NAME
# (Network Configuration, Basic, SIP Phone Host Name)
# defines the host name of the SIP phone.
# This parameter is used when addr_type is set to FQDN
host_name= sip1
##################################################################################
# Default user profile configuration
##################################################################################
# USER ID.
# (User Configuration, Basic, User ID or Extension)
# used to register to the SIP proxy as user_id@domain
# this id must be one string, no space is allowed
user_id= user
# USER DISPLAY NAME.
# (User Configuration, Basic, User Display name)
# used to display the user's human readable name in SIP "from" header
# from= "display name" sip= user_id@domain
disp_name= disp username
# USER NAME
# (User Configuration, Basic, SIP Authentication User Name)
# used as the user identify for authentication purpose. It could be same as user_id.
# but it could also be different. such as in the format of user_id@domain
# no white space is allowed in this string
user_name= user
# PASSWORD
# (User Configuration, Basic, Password)
# As a pair with user_name for authentication purpose.
password= hello
# User's other PSTN PHONE NUMBER
# (User Configuration, Basic, Public Phone Number)
# this parameter is used in SDP packets to show the user can also be reached by this
# phone number.
# this is an option.
phone_num=
# EMAIL ADDRESS of the user
# (User Configuration, Basic, Email Address)
# this parameter is used in SDP packets to show the user can also be reached by this
# email address. It is an option
email=
- 72 -