User Guide for 3050 ICP Users - Mitel Edocs

5055 SIP Phone User Guide (Rev. A)
# SNTP SERVER IP ADDRESS
# (Network Configuration, Additional Servers, SNTP server)
# the SIP phone updates its date and time from this server
sntp= 192.52.103.103
# TIME ZONE
# (Network Configuration, Additional Servers, Time Zone)
# integer [-12, 0, 12]
time_zone= -5; EST time
#time_zone= 8; China
# TOS
# (Network Configuration, Advanced, Tos Value)
# integer [0, 7];
tos= 0
# IEEE 802.1 PRIORITY
# (Network Configuration, Advanced, 802.1 Priority)
# integer [-1, 0, 7]
# -1 means OFF
802_priority= -1
# VLAN ID
# (Network Configuration, Advanced, VLAN ID)
# integer[0, 4095]
vlan_id= 1
##################################################################################
# SIP configuration
##################################################################################
# LOCAL SIP PORT
# (SIP Configuration, Basic, Phone Listening Port)
# SIP phone listens for the SIP packets at this port
# when the other phone calls this phone, the SIP packets must be sent to this port
local_sip_port= 5060
# TRANSPORT PROTOCOL FOR SIP
# (SIP Configuration, Basic, Transport Protocol)
# this parameter can be overwritten by dialing a URL with this parameter: transport= udp
# or transport = tcp
# choice [1-tcp, 2- udp]
trans_protocol= 2
# SIP PROXY ADDRESS
# (SIP Configuration, Basic, SIP Proxy Server)
# When dialing a number or user_id only, the proxy address is automatically appended
# to the number (or id) as number@proxy or user_id@proxy
# The proxy address can be in IP address or domain.com format
proxy_addr=
# SIP PROXY PORT
# (SIP Configuration, Basic, SIP Proxy Server, Port)
proxy_port= 5060
# OUTBOUND PROXY IP ADDRESS
# (SIP Configuration, Additional Server, Outbound Server IP)
# 1) if, for some reason, the SIP phone must send request to a local SIP proxy first,
# configure this outbound SIP proxy IP address
# 2) if the above proxy_addr (domain.com) is not resolvable from the DNS server,
# this IP address is used in place of the proxy address
outbound_ip= 192.168.0.1
# OUTBOUND STATE
# (SIP Configuration, Additional Servers, Outbound Server)
# choice [0-OFF, 1-ON]
# if ON, all the SIP requests and responses are always sent to the outbound IP.
# Otherwise, the SIP responses are sent to the "via" address. The requests are sent
# to "route" or "contact", according to the rule defined by the SIP specs.
outbound_state= 0
- 68 -